Little Known Repair Tips for Your Metal Detector
- Non-functioning search heads If you have a non-functional search head, try to analyze the condition. Check for any mud or dirt sticking on your metal detector's search head. ...
- Store your batteries when not in use In order to avoid any battery-related problems with your metal detector, it is best to stash them in the "fridge" when not ...
- Turn it off Always turn off your metal detector before repairing it. This is to avoid any further dilemma. ...
- Find a reliable repair shop
Full Answer
How to fix metal detectors?
- Discrimination: Allows you to choose what kind of targets you want. ...
- Sensitivity: Allows you to choose how precise the detector will be. ...
- Detection Mode: This allows you to filter out certain objects, like coins, to make detection more precise.
- Ground Balance: Allows you to account for common minerals. ...
How to buy a new metal detector?
WHAT TO DO BEFORE YOU BUY A METAL DETECTOR:
- v2.0
- v3.2
- v4.0
- v4.1. 6) Try to find and read as many reviews for detectors in focus, but exercise some caution against fake reviews and field tests.
What metal can a metal detector not detect?
While a metal detector can’t detect jewels or some raw earths, it might be able to lead you to their hideouts. The graphic display provides real-time information of large objects at significant depths. It splits segments into Cavity, Metal, Ferrous, and Precious Metal.
How to prevent metal detector from detecting metal?
put a large piece of metal in between the detector and the piece of metal (this stops the sensor from detecting the metal on the other side of the large piece of metal… but I think this is probably not the answer you are looking for…) shoot the human - somehow this is also probably not what you are looking for either.
How do you fix a metal detector coil?
0:035:29HOW TO REPAIR A MINELAB CTX 3030 COIL - PART #2 - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing some special adhesive. And this is called bison. And this stuff turned out to be perfect forMoreUsing some special adhesive. And this is called bison. And this stuff turned out to be perfect for the job that I want it for before rushing and sticking the parts together using this adhesive.
How can I make my metal detector work better?
To increase the depth of a metal detector, you can:sweep the coil close to the ground.increase the sensitivity setting.reduce the discrimination setting.install fresh batteries.upgrade to larger coil.
Can metal detectors fail?
Unfortunately, it can happen that detectors erroneously identify metal where there is none, leading to the destruction of good products. The metal detector is not always the source of error, some problems can be easily and inexpensively remedied.
What is inside a metal detector coil?
A metal detector contains a coil of wire (wrapped around the circular head at the end of the handle) known as the transmitter coil. When electricity flows through the coil, a magnetic field is created all around it. As you sweep the detector over the ground, you make the magnetic field move around too.
Why won't my metal detector detect gold?
Metal detectors are electromagnetic devices, and as such can detect items that are conductive and non-magnetic, like gold, or non-conductive but magnetic, like magnetite. Or both, like metallic iron. When dealing with gold you are dealing only with conductivity.
Why do you ground balance a metal detector?
A ground balance setting on your detector will help minimize the loss of depth and the false signals. Ground balance is a variable setting that increases your machine's detection depth in mineralized soil. The soil may contain fine iron particles in areas with red earth or salts found in beach sand.
How do you test a metal detector?
simply place the metal test piece in or through the aperture without the product. For most third party audits, testing without product will result in non- compliance and, even worse, could allow metal to pass undetected during production.
Does aluminum foil block metal detectors?
The post office uses x-rays, which are blocked by aluminum foil. Metal detectors are not likely to detect aluminum foil, however. If you use X-rays, then you will see a big blank spot in the suitcase, and you will be forced to open it. So you can't cover something else with aluminum foil at the airport.
Will gold set off a metal detector?
Gold, platinum, sterling silver, and other fine jewelry rarely causes an alarm. That means you can wear your rings, earrings, necklaces, bracelets, and watches. The only gotcha is when your jewelry is bulky or contains a lot of metal.
Can you use any coil on a metal detector?
Most metal detectors work with coils from the same manufacturer. That said, metal detectors may operate on many different frequencies. This means you have more chance of matching your detector to a new, but different, coil. Just be sure to check compatibility.
How do you test a metal detector coil?
1:1910:06How to test Whites metal detector search Coil resistance MXT ALL ...YouTubeStart of suggested clipEnd of suggested clipPut it in a little vise to hold it steady right the other thing you don't want to do is to take yourMorePut it in a little vise to hold it steady right the other thing you don't want to do is to take your meter. And try to cram the tips. Into these holes to make connection.
Do magnets set off metal detectors?
Metalic magnets made of iron or iron alloyed with neodymium or cobalt have large conductivities and should be easily sensed. Ceramic-ferrite magnets on the other hand have almost no conductivity and thus won't show up. You might try an experiment using both types.
Can you upgrade a metal detector?
Upgrade Your Detector with a Powerful New Search Coil! You can “soup up” your metal detector just by adding a more powerful search coil! The Detech 15 x 12″ SEF Butterfly Search Coil will give you MUCH deeper depth and better pinpointing than a standard 8″ search coil.
How do you calibrate a metal detector?
1:035:46How To Set Up And Calibrate A Metal Detector - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd set up sensitivity of the machine a metal detector needs to be calibrated at the beginning ofMoreAnd set up sensitivity of the machine a metal detector needs to be calibrated at the beginning of the shift. One to two hours into production depending on recommendations from the supplier.
What is the best frequency for metal detectors?
The best frequency for metal detecting is somewhere in the range of 5 kHz to 15 kHz. This range is where most general-purpose metal detectors are tuned too, and also the easiest to manage for beginners.
How deep can a metal detector detect?
Most metal detectors can detect objects about 4-8ʺ (10 - 20 cm) deep. In ideal conditions, a mid-range metal detector can reach 12-18ʺ (30-45 cm) underground. Some specialized detectors can go as deep as 65' (20 m).
How to keep a metal detector from mud?
By keeping your metal detector's search head and wellies free from mud you can use them for a longer period of time. 2. Store your batteries when not in use. In order to avoid any battery-related problems with your metal detector, it is best to stash them in the "fridge" when not in use.
Can you fix a metal detector?
This way you avoid spending more on repair charges. Plus, you can be sure that your metal detector is in good hands. Indeed, you can fix or repair your metal detector without having to spend hundreds of dollars on repair charges or lengthy restoration, thereby, curbing your metal detecting.
Expert Service for Every Stage of Your Metal Detector's Life Cycle
Our team of professionals have decades of Inspection experience and offer a full menu of services for your processing line’s metal detectors to help you reach maximum up-time while maintaining accuracy and efficiency.
Get In Touch
Call us at (559) 862 – 1400 or use the form below to contact us 24 hours a day, 7 days a week.
Not Finding Specific Targets
This problem is mainly caused by using the incorrect mode for the kind of hunting you’re doing. For example, if you are hunting for all types of metals, make sure you are using the All-Metal mode.
Poor Depth Detection
This happens when your deep-seeking metal detector starts to only pick up shallow objects. One of the possible causes of loss of depth is when there is a broken wire inside the search coil. Try checking the cable, the connector, and the cable’s entry point to find the exact spot it’s broken.
Target ID Cursor Bounces
Sometimes your Target ID cursor can start to bounce erratically, which is usually causes by trash targets. Other possible reasons are when one or several trash targets are next to a viable target, or when a good target is laying on an edge or not parallel to your detector’s search coil.
Metal Detector Constant Beep
Constant beeping and false signals can throw a wrench in your fun and ruin your trip. If your metal detector is beeping but nothing can be found, it is going to waste the time and energy that was supposed to be spent on hours of fun.
Reasons for False Signals
Footwear With Metal Accents: Metallic parts in your shoes can trigger a false signal, including steel toe boots, studs, rivets, or metal angelets. If you’re unsure if your shoes are causing the issue, you should run your detector over them to check if a signal is set off. It is best to wear shoes with no metal in them, just in case.
Conclusion
If your detector continues to malfunction and none of the above seems to be the cause, look for a professional technician in your area. Also, make sure you have read the manual and exhaust all other options.
