Begin Moen Kitchen Faucet Repair by Disassembling the Faucet
- Turn off the water valves under the sink and open the faucet to relieve water pressure.
- Locate the screw cap on the faucet handle and pry it off with a flat-head screwdriver to reveal the set screw holding on the handle. ...
- Loosen the set screw with a 1/8-inch Allen wrench and pull off the handle. ...
- Unscrew the retaining nut holding the cartridge using tongue and groove pliers. The cartridge may also be secured by a retaining pin. ...
- Pull out the cartridge by grasping the valve stem with pliers and wiggling it back and forth until it comes out. ...
How to install Moen pull down kitchen faucet?
Install the deck gasket onto the new faucet by fitting it over the flexible supply lines and sliding it up into the faucet body. Feed the supply tubes through the hole in the sink deck, and center the faucet body over the hole. Position the faucet where you want it and make sure it fits well before going below the sink to secure it.
How to troubleshoot a Moen traditional shower faucet?
- chrome finish is highly reflective for a mirror-like look that works with any decorating style
- lever handle makes it easy to adjust the water
- install with Posi-Temp® pressure balancing control valve to maintain water temperature control in the shower
How to replace a diverter valve in a Moen faucet?
- Unscrew the Phillips screw holding the temperature limiter and lift it off the valve housing. Not all faucets have this part.
- Unscrew the retaining nut holding the cartridge in place using locking pliers. ...
- Grasp the spout and wiggle and turn it as you gently lift it off the valve housing. ...
How do I remove a Moen single handle kitchen faucet?
Steps to follow to remove a Moen kitchen faucet
- Turn off water. Locate the water supply under the sink and turn it off. ...
- Drain the pipes. Open the Moen faucet to drain out any water that may still be inside the pipes. ...
- Remove the handle. ...
- Remove the dome and plastic sleeve. ...
- Removing the handle mechanism. ...
- Remove the ring and washer. ...
- Remove the spout. ...
- Pull out the cartridge. ...
See more
How do you take apart a Moen faucet?
Some Moen faucets have handles that remove by loosening the screw in the back of the handle. To loosen this screw use a 3/32" hex wrench. After the handle has been removed unscrew the spout collar nut by turning counterclockwise then lift and rotate the spout.
How do I find my Moen faucet model number?
Exact model numbers can be found on your box or on your instruction sheet. If unavailable, you may find the general family series number on the back of the spout (non pullout).
How do you change the cartridge on a Moen single handle faucet?
1:446:12Moen Bathroom Faucet Repair - Moen 1225 - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd we're going to break the bond of any rust or calcium or minerals on the old cartridge. So it'sMoreAnd we're going to break the bond of any rust or calcium or minerals on the old cartridge. So it's going to be easy to pull. Out. Now you can take a pair of pliers. And pull the old cartridge.
How do you fix a leaking Moen single handle faucet?
0:265:29How to Repair a Leaking Moen Kitchen Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor this cartridge they based the replacement parts off in description and Moen has a lifetime freeMoreFor this cartridge they based the replacement parts off in description and Moen has a lifetime free replacement for their faucets. So if a supplier is going to charge you for a new cartridge.
How do I change a Moen cartridge?
1:213:14How to Remove & Install the 1222 Cartridge - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure the cartridge is in the on position the notch in the stem should be facing up remove theMoreMake sure the cartridge is in the on position the notch in the stem should be facing up remove the cartridge from the valve. You can also use the Moen cartridge removal tool to pull out the cartridge.
How do you replace a Moen kitchen faucet cartridge?
0:282:32How to Change Moen Kitchen Faucet Cartridge - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the cartridge retaining nut go ahead and grab your channel locks loosen that up. And remove it.MoreAnd the cartridge retaining nut go ahead and grab your channel locks loosen that up. And remove it. You'll then pull out your cartridge.
How do you remove a Moen cartridge without the tool?
2:0114:48Removing a Stuck Moen Cartridge Without Proper Cartridge PullerYouTubeStart of suggested clipEnd of suggested clipYou know kind of wiggle it and pull over straight.MoreYou know kind of wiggle it and pull over straight.
How do you remove a Moen faucet cartridge?
0:162:05How to remove and install the Moen 1224 Cartridge - YouTubeYouTubeStart of suggested clipEnd of suggested clipStep 2 remove the trim and the 1224 cartridge unthread the set screw to detach the handle. RemoveMoreStep 2 remove the trim and the 1224 cartridge unthread the set screw to detach the handle. Remove the cartridge nut. Pull out the cartridge.
How do I identify my Moen kitchen faucet cartridge?
Exact model numbers can be found on your box or on your instruction sheet. If unavailable, you may find the general family series number on the back of the spout (non pullout).
Why does my Moen faucet keep dripping?
If your Moen kitchen faucet is leaking from the spout, the cartridge isn't sealing water. The problem could be a damaged cartridge or worn seals. To access the cartridge, some disassembly is required. Turn off the water valves under the sink and open the faucet to relieve water pressure.
How do you replace the O-ring on a Moen kitchen faucet?
0:144:50Moen High Arc Kitchen Faucet Leaking O-Ring ReplacementYouTubeStart of suggested clipEnd of suggested clipThe o-ring replacement o-ring as well as a plastic piece that keeps the handle from wiggling andMoreThe o-ring replacement o-ring as well as a plastic piece that keeps the handle from wiggling and then some silicone grease that you're supposed to use with it got my instruction sheet.
How do you take apart a single handle faucet?
0:182:44Repairing a Leaky Single Handle Ball-Type Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis may require using an Allen wrench to loosen the handle. There may be a button that covers theMoreThis may require using an Allen wrench to loosen the handle. There may be a button that covers the screw that needs to be removed first and then you can loosen the screw and remove the lever handle.
How do I identify my faucet model?
Identify The Model Number Several manufacturers, such as Moen, put the model number on the faucet itself. You may be able to find the number stamped or printed on the backside of the spout, on its underside, on the back of the decorative ring on the bottom of the spout, or possibly on the escutcheon.
What is the difference between a Moen 1222 and 1225 cartridge?
The biggest difference between the Moen 1222 vs 1225 cartridges is how the shower valve handle turns the water on. Shower valves with the Moen 1225 cartridge are turned on by pulling the handle out and then adjusting the temperature by turning the handle to the left or right for hot or cold water.
What is the difference between Moen 1225 and 1225b cartridge?
Q:What is the difference between 1225 B cartridge and 1225 ? A: According to Moen, they are the same cartridge. There used to be a difference in the packaging (bulk pack vs retail pack), but the packaging is even the same now.
Does Moen replace parts for free?
If this faucet should ever develop a leak or drip during the Warranty Period, Moen will FREE OF CHARGE provide the parts necessary to put the faucet back in good working condition and will replace FREE OF CHARGE any part or finish that proves defective in material and manufacturing workmanship, under normal ...
How to loosen a cartridge?
Once you loosen the cartridge by twisting it a bit in both directions, then you can wiggle it up and eventually remove the entire cartridge.
How to remove a handle on a scuba diver?
To remove the handle, flip open the little red/blue plastic nib on the side of the handle (see video). You will access a hole to get your Allen key (hex tool) and be able to unscrew the long screw that holds the handle on. Then, remove the dome (see photos) which should just slide up and off.
Does Moen guarantee parts?
One little known secret is that Moen guarantees its parts for life. If you ever have an issue, call up your local country Moen headquarters and after filling out a form and sending them photos of your problem, they will send you the parts. You will need to figure out what faucet you have.
What is the white part of a faucet?
Now, you will see that the white piece inside the hole of the faucet has a rounded part and a flat part. On the other hand, there is also a white piece inside the faucet handle that has a round part and a flat part. Now, all you need to do is put the handle right back on the faucet hole.
What does "opening the faucet" mean?
Here, opening the faucet refers to opening the handle. So you already know which side of the faucet is causing the leaking. Now, you have to open up this handle into pieces so that you are able to stop the water leakage.
What to do if you don't find a switch under the sink?
On the other hand, if you don’t find any switch under the sink, you will need to switch off the main water lever of the house. If you are going to do Moen bathroom faucet repair one handle, you will not need to check both levers. You can just switch off the only main lever you have and you are done!
How to clean a cartridge?
First of all, clean the hole with water and if possible, push your towel a little inside the hole and remove the water. It will reduce the chances of water splashing and keep your clothes and the place clean. This is completely your personal preference.
How long does it take for a hot water switch to turn on?
There can also so one switch for both of them. First of all, turn the switch of hot water and after 1-1.5 minutes, check if there is any water leaking or not.
Can you mix a Moen faucet?
There are so many Moen faucets and the repairing methods of these are model-specific. So, you cannot mix up the repairing methods of all the models and confuse them. However, in most cases, with the help of some steps, you can easily repair the leaking issue of most of the Moen bathroom faucet.
Is it normal to have a Moen faucet every 5 seconds?
No matter you use a Moen faucet or a regular one; you can get annoyed with your faucet. A drop of water every five seconds is normal to me- said no one! Yes, no one said this because it is annoying to everybody!
What is the number to call for a faucet nut?
If you have an imbedded cartridge nut and would like additional help, feel free to contact us or call us for assistance at 1-800-BUY-MOEN ( 1-800-289-6636 ).
Is Moen faucet backed by a lifetime warranty?
Moen products have been manufactured under the highest standards of quality and workmanship. Most Moen faucets are backed by Moen's Lifetime Limited warranty. For more information about your Warranty, please visit our Warranty Information page.
