Repairing Guides

how to repair a moen kitchen faucet handle

by Emie Hand Published 2 years ago Updated 2 years ago
image

Tightening Moen Kitchen Faucet Handle

  1. Turn off the water and cover the drain. Working on the faucet handle requires the same prep work as working on its base. ...
  2. Locate the set screw. All Moen faucet handles are held in place by a set screw located under a decorative plate. ...
  3. Tighten the screw. ...
  4. Replace the decorative cap. ...
  5. Turn on the water and check for leaks. ...

Part of a video titled How to repair a single handle Moen kitchen faucet ... - YouTube
3:45
11:14
And you want to put the deep the deeper circle goes towards the stem. Down. So I'm gonna snap it inMoreAnd you want to put the deep the deeper circle goes towards the stem. Down. So I'm gonna snap it in place with that larger hole on the bomb.

Full Answer

How to tighten a loose Moen single handle kitchen faucet?

Tightening the Handle of a Loose Moen Kitchen Faucet

  1. Turn the Water Supply Lines Off. When you tighten the handle on your Moen kitchen faucets, you will first have to clean the top of your sink area.
  2. Check the Handle on Your Kitchen Faucet. Each Moen kitchen faucet has a certain setup. ...
  3. Remove the Hex Nut or Plastic Screw. ...
  4. Find the Setscrew. ...
  5. Tighten the Setscrew. ...

How to disassemble Moen faucet?

How to take apart a Moen single handle cartridge faucet

  1. First things first, turn off the water supply line from the bottom of your sink. You’ll find two valves there that are for hot water and cold water.
  2. Drain the faucet and the pipes properly. Even if you turned off the supply lines for both of the faucets, there might be some water remaining in the ...
  3. Cover the draining system of your sink. ...

More items...

How to fix a leaky Moen faucet?

  • Best fish tank: Stylish abodes for your aquatic amigos
  • How to clean a fish tank
  • Best small fish tank: Petite pads for your tiny tribe

How to change the cartridge on a Moen 7400 faucet?

Things You'll Need

  • Slot screwdriver
  • Allen wrench
  • Slip-lock pliers
  • Thread lubricant

See more

image

How do you take apart a single handle Moen kitchen faucet?

Some Moen faucets have handles that remove by loosening the screw in the back of the handle. To loosen this screw use a 3/32" hex wrench. After the handle has been removed unscrew the spout collar nut by turning counterclockwise then lift and rotate the spout.

How do you fix a Moen kitchen faucet handle that came off?

1:147:57Moen Kitchen Faucet Broken Lever Handle Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut what happened is this handle came off and you can barely see it. You can barely see it down hereMoreBut what happened is this handle came off and you can barely see it. You can barely see it down here but there's a. You can see where it's broken off that screw just broke off.

How do you fix a Moen faucet handle?

1:034:07Fixing a Leaking Moen Bathroom Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhile trying not to damage the threads use a small flat-head screwdriver to loosen the cartridgeMoreWhile trying not to damage the threads use a small flat-head screwdriver to loosen the cartridge before grabbing those channel locks again.

How do you remove a Moen single handle faucet handle?

1:203:54Repair and Replace (Single Handle | Moen | Bathroom Faucet) - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse the channel lock pliers to unscrew the plastic rate. And then remove the second ring fromMoreUse the channel lock pliers to unscrew the plastic rate. And then remove the second ring from underneath. Next pull out the retaining clip using the needlenose pliers.

How do I fix a single handle kitchen faucet?

0:423:11How to Repair a Leaky Single Handle Ball Kitchen Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst you will need to turn off the hot and cold water supply valve under the sink. Next. You willMoreFirst you will need to turn off the hot and cold water supply valve under the sink. Next. You will need to remove the single lever handle. This may require using an allen wrench to loosen the hammer.

How do I know what model Moen faucet I have?

Exact model numbers can be found on your box or on your instruction sheet. If unavailable, you may find the general family series number on the back of the spout (non pullout).

How do you remove a Moen faucet handle without visible screws?

You can use an allen wrench (also called an allen key) to remove it. Once you've done that, you can typically just lift the faucet handle off. However, if it has a cartridge inside, you may need to unscrew a top piece as well to be able to remove the cartridge.

How do you tighten a Moen single handle kitchen faucet handle?

0:043:47Tighten Loose Faucet Handle and base - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you'll need something like a swiss army knife or a small screwdriver. And right in the back ofMoreSo you'll need something like a swiss army knife or a small screwdriver. And right in the back of the handle. You'll find this tiny little cap and you're just going to very carefully pop it out.

How do you take apart a single handle faucet?

0:182:44Repairing a Leaky Single Handle Ball-Type Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis may require using an Allen wrench to loosen the handle. There may be a button that covers theMoreThis may require using an Allen wrench to loosen the handle. There may be a button that covers the screw that needs to be removed first and then you can loosen the screw and remove the lever handle.

How do you assemble a Moen single handle faucet?

1:194:47Installing a Pullout Kitchen Faucet | Moen Guided Installations - YouTubeYouTubeStart of suggested clipEnd of suggested clipThread the mounting nut onto the faucet shank with your fingers. Make sure the faucet is positionedMoreThread the mounting nut onto the faucet shank with your fingers. Make sure the faucet is positioned properly tighten the mounting nut with a provided installation.

How do you remove a stem from a Moen faucet?

Use pliers on the white plastic tool and loosen the cartridge by twisting 1/4 turn each direction one at a time. After removing the white plastic tool, grasp the cartridge stem and pull it straight out of the valve (using pliers or an adjustable wrench). You can now install your new cartridge.

How do you tighten a Moen bathroom faucet handle?

0:431:47Tighten a Loose Lever on Moen Brantford Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipHold the lever still and then grab the lower part right below that here and turn it you know leftyMoreHold the lever still and then grab the lower part right below that here and turn it you know lefty loosey. And I'll come right off the valve in a few seconds there like so and then in fact probably.

How do you fix a 2 handle Moen kitchen faucet?

0:034:50Kitchen Plumbing : Double Handle Kitchen Faucet Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd this is how you repair a double handled kitchen sink.MoreAnd this is how you repair a double handled kitchen sink.

How do you assemble a Moen single handle faucet?

1:194:47Installing a Pullout Kitchen Faucet | Moen Guided Installations - YouTubeYouTubeStart of suggested clipEnd of suggested clipThread the mounting nut onto the faucet shank with your fingers. Make sure the faucet is positionedMoreThread the mounting nut onto the faucet shank with your fingers. Make sure the faucet is positioned properly tighten the mounting nut with a provided installation.

How do you tighten a Moen single handle bathroom faucet?

0:002:24How to Fix Loose Moen Faucet Handle - YouTubeYouTubeStart of suggested clipEnd of suggested clipHead pull that out might be a good idea to shut your drain. So you don't drop it in there and loseMoreHead pull that out might be a good idea to shut your drain. So you don't drop it in there and lose it. And then i'm going to tilt this up so you can see in there.

How many handles does a Moen kitchen faucet have?

If you're involved with a Moen kitchen faucet repair, and the faucet has only one handle, the job will entail taking the faucet apart. If you're involved with a Moen kitchen faucet repair, and the faucet has only one handle, the job will entail taking the faucet apart.

Why is my Moen pull out faucet leaking?

If you have a Moen pull out kitchen faucet leaking from the base, however, the problem could be that the quick connector between the spout hose and the faucet base is leaking. That isn't supposed to happen, and when it does, it's usually because the connecter wasn't put together properly. Moen's instructions for fixing this problem begin ...

How to access O rings on a faucet?

To access the O-rings, you need to remove the spout. You can do this without removing the valve, although you do have to remove the handle. Once the handle is off, grasp the spout and lift it right off the faucet base, tapping with a mallet if necessary to loosen it.

Do Delta faucets have cartridge valves?

If you take apart a faucet from another manufacturer, such as Delta, you're as likely to find a ball valve as you are to find a cartridge valve, but that's not true if the faucet is a Moen. All Moen faucets, even the two-handled models, have cartridge valves.

How to remove a handle on a scuba diver?

To remove the handle, flip open the little red/blue plastic nib on the side of the handle (see video). You will access a hole to get your Allen key (hex tool) and be able to unscrew the long screw that holds the handle on. Then, remove the dome (see photos) which should just slide up and off.

How to loosen a cartridge?

Once you loosen the cartridge by twisting it a bit in both directions, then you can wiggle it up and eventually remove the entire cartridge.

Does Moen guarantee parts?

One little known secret is that Moen guarantees its parts for life. If you ever have an issue, call up your local country Moen headquarters and after filling out a form and sending them photos of your problem, they will send you the parts. You will need to figure out what faucet you have.

Why Does My Moen Kitchen Faucet Handle Keep Coming Loose?

Fixing a loose handle is an easy job, but before getting started, you should understand why the part keeps dropping over and over again. There are several reasons, each cause requiring a different fix.

Things You Will Need To Repair A Loose Faucet Handle

Repairing a loose faucet handle isn’t hard, as long as you have all tools and materials at hand. Here’s a list of things you’ll need.

How To Tighten A Loose Moen Single Handle Kitchen Faucet

While a loose faucet handle can get on your nerves, the entire kitchen sink faucet can also come loose from the base. Follow the steps below to tighten the faucet base or the faucet handle, depending on what problem you have.

FAQs

Tightening a loose Moen faucet handle isn’t hard, and anyone can do it. However, you may still have questions before getting down to business. Check out the answers below.

Final Thoughts

A loose kitchen faucet handle can leak and make it a pain to use the kitchen sink. Luckily, the problem is often a cinch to fix. All you have to do is locate the set screw under the red/blue cap and tighten it. Hopefully, you now know how to do it and how to fasten the faucet’s base as well.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9