Repairing Guides

how to repair a moen tub faucet

by Miss Rosa Graham Published 3 years ago Updated 2 years ago
image

Moen Bathroom Faucet Leaking Repair

  1. Switch off the Main Lever. First of all, you have to go through the main switch of the water. ...
  2. Opening the Faucet. Here, opening the faucet refers to opening the handle. ...
  3. Put off the Cartridge. ...
  4. Clean it up. ...
  5. Add Silicone Grease. ...
  6. Inserting the Cartridge. ...
  7. Put the Handle On. ...

Part of a video titled How to Repair a Moen Shower/Tub valve - YouTube
1:49
14:09
We make sure that we have the correct posi temp cartridge the Moen 12:20 to be we make sure we haveMoreWe make sure that we have the correct posi temp cartridge the Moen 12:20 to be we make sure we have the allen wrench to pull off the handle and all that stuff. So that we pull this cartridge out.

Full Answer

How do you repair Moen bathroom faucets?

Turn off Water to the Faucet

  • Duck under the bathroom sink and look for 2 oval-shaped knobs connected to water supply houses. Those are the cold and hot water shut off valves.
  • To turn off water to the faucet, turn the two valves all the clockwise.
  • Open the faucet to drain the water already in the hoses.
  • Plug off the sink drain opening. ...

How do you take apart a Moen bathroom faucet?

To remove the handles on a faucet with screws, here’s what you’ll need:

  • Allen wrench or screwdriver
  • Pliers
  • Flathead screwdriver
  • Rag

How do I replace my Moen bathroom faucet cartridge?

  • Under a cap on top of the handle
  • Behind a plug button on the side of the handle
  • No screw: Base of handle unthreads

How to replace a leaky Moen faucet?

Tools you Need

  • Screwdriver
  • Allen Wrench
  • Flathead screwdriver
  • Adjustable wrench pliers
  • Soft Brush
  • Tools that come with Moen faucet

image

How do you fix a leaking Moen single handle bathtub faucet?

4:2310:41How to Repair a Leaky Moen Tub / Shower in 30 Minutes - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere are several things that could go wrong with this could be some mechanics on the inside here itMoreThere are several things that could go wrong with this could be some mechanics on the inside here it could be the seals on. The left and the right for the hot and cold your o-ring could go bad.

How do you tighten a Moen tub faucet?

0:102:04Moen Bathtub Faucet Handle Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere's there's a movable escutcheon on the bottom. Right here if you had a leaky faucet you'dMoreThere's there's a movable escutcheon on the bottom. Right here if you had a leaky faucet you'd replace this stem and the seat that the Sims sits against but for the handle.

How do you change a cartridge on a Moen tub faucet?

0:002:53Moen Tub Cartridge Replacement - 1220 or 1225 Moen CartridgeYouTubeStart of suggested clipEnd of suggested clipGo through the steps on replacing a single handle Moen cartridge remove the handle the escutcheonMoreGo through the steps on replacing a single handle Moen cartridge remove the handle the escutcheon plate. And tube the escutcheon plate is generally held in with two screws.

How do you remove a Moen bathtub faucet?

1:116:45Replace a Moen Shower Cartridge - Fix Leaky Tub Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor a single handle Moen cartridge they're all held in place by a little retaining clip and so ifMoreFor a single handle Moen cartridge they're all held in place by a little retaining clip and so if you have an awl or a very small screwdriver. You're going to catch the end of the clip.

How do you remove a Moen Roman bathtub cartridge?

2:505:01Moen Roman Tub Faucet Cartridge Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can just grab here jiggle a little and pull and this will remove right out use your PhillipsMoreYou can just grab here jiggle a little and pull and this will remove right out use your Phillips head screwdriver.

How do you tighten the handle on a Moen bathroom faucet?

0:331:47Tighten a Loose Lever on Moen Brantford Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipHold the lever still and then grab the lower part right below that here and turn it you know leftyMoreHold the lever still and then grab the lower part right below that here and turn it you know lefty loosey. And I'll come right off the valve in a few seconds there like so and then in fact probably.

How do you remove the cartridge from a bathtub faucet?

0:111:21Fixing Faucets : How to Replace a Difficult Tub Faucet CartridgeYouTubeStart of suggested clipEnd of suggested clipAnd this puller simply fits on to the cartridge. Tightens its tightens into place you rotate it getMoreAnd this puller simply fits on to the cartridge. Tightens its tightens into place you rotate it get it to to work all the way around.

How do I know which Moen cartridge I need?

0:063:58Old plumber shows tips and tricks on moen faucets. Choosing the right ...YouTubeStart of suggested clipEnd of suggested clipSimply by going to your faucet years ago go into your faucet. And pull them pulling. On yourMoreSimply by going to your faucet years ago go into your faucet. And pull them pulling. On your cartridge if the handle pulls out it's a 12 25 cartridge.

How do you remove a cartridge from a Moen faucet?

Use pliers on the white plastic tool and loosen the cartridge by twisting 1/4 turn each direction one at a time. After removing the white plastic tool, grasp the cartridge stem and pull it straight out of the valve (using pliers or an adjustable wrench). You can now install your new cartridge.

How do you remove a bathtub faucet without set screws?

If there is no set screw, you have a threaded tub spout. You can remove your tub spout by twisting it counter-clockwise to see how your existing spout is threaded, if desired, but it is recommended you leave the spout on if you might need to use the tub before your new spout arrives.

How do you remove a Moen bathroom faucet without screws?

You can use an allen wrench (also called an allen key) to remove it. Once you've done that, you can typically just lift the faucet handle off. However, if it has a cartridge inside, you may need to unscrew a top piece as well to be able to remove the cartridge.

How do you fix a bathtub faucet handle?

3:054:17Replace/Upgrade your Shower and Bath Handle - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then put the little black rubber cap on. And voila let's give it a try. Okay very good so that'sMoreAnd then put the little black rubber cap on. And voila let's give it a try. Okay very good so that's how to upgrade or replace your old ugly plastic broken handle on your bathtub.

How do you remove a Moen bathroom faucet without screws?

You can use an allen wrench (also called an allen key) to remove it. Once you've done that, you can typically just lift the faucet handle off. However, if it has a cartridge inside, you may need to unscrew a top piece as well to be able to remove the cartridge.

How do you tighten a loose bathroom faucet?

0:091:35How to Tighten a Loose Bathroom Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd it just hand tighten that's all it needs to be what I'm gonna do is just tighten it up screw itMoreAnd it just hand tighten that's all it needs to be what I'm gonna do is just tighten it up screw it back to the very top.

Why is my faucet handle loose?

It's usually a result of wear and tear on the faucet stem, or cartridge. The cartridge attaches to the handle and the two components work together to control the water flow. When the stem becomes stripped, the handle will feel loose or just spin on end.

How do you remove a bathroom sink lever style faucet handle with no screws or caps?

1:075:17how to remove a tap with no screw with Inspire DIY Kent ThomasYouTubeStart of suggested clipEnd of suggested clipSame again and undo the tap all the way to the top. And then you'll be able to undo. The hood andMoreSame again and undo the tap all the way to the top. And then you'll be able to undo. The hood and get your wrench on the tap down the bottom. There you'll be able to get.

What is the white part of a faucet?

Now, you will see that the white piece inside the hole of the faucet has a rounded part and a flat part. On the other hand, there is also a white piece inside the faucet handle that has a round part and a flat part. Now, all you need to do is put the handle right back on the faucet hole.

What to do if you don't find a switch under the sink?

On the other hand, if you don’t find any switch under the sink, you will need to switch off the main water lever of the house. If you are going to do Moen bathroom faucet repair one handle, you will not need to check both levers. You can just switch off the only main lever you have and you are done!

What does "opening the faucet" mean?

Here, opening the faucet refers to opening the handle. So you already know which side of the faucet is causing the leaking. Now, you have to open up this handle into pieces so that you are able to stop the water leakage.

How to clean a cartridge?

First of all, clean the hole with water and if possible, push your towel a little inside the hole and remove the water. It will reduce the chances of water splashing and keep your clothes and the place clean. This is completely your personal preference.

Can you mix a Moen faucet?

There are so many Moen faucets and the repairing methods of these are model-specific. So, you cannot mix up the repairing methods of all the models and confuse them. However, in most cases, with the help of some steps, you can easily repair the leaking issue of most of the Moen bathroom faucet.

Is it normal to have a Moen faucet every 5 seconds?

No matter you use a Moen faucet or a regular one; you can get annoyed with your faucet. A drop of water every five seconds is normal to me- said no one! Yes, no one said this because it is annoying to everybody!

Can you put silicone grease on a cartridge?

There are people who don’t use silicone grease, however; it makes the cartridge entrance easier than before. Take the new cartridge in your hands. With the head of the tube, all you need to do is put the silicone grease on the rubber parts of the new cartridge.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9