Necklace Barrel Clasp Repair
- Necklace Barrel Clasp Repair. Locate the broken part of the ring that attaches through the back of the barrel clasp. ...
- Plug in the electric soldering iron and set the solder temperature to the degrees that suits the melting point of both the soldering wire and the barrel clasp.
- Molten metal is extremely hot and will cause severe burns. Handle the soldering gun with care and keep your distance from the melting metal.
- Attach the barrel clasp necklace back together and hold each end of the necklace taught to test the solder strength.
How to replace a broken necklace clasp?
Jewelry Clasp Types
- Spring Ring Clasp. These bits of gold chain have attached spring ring clasps. ...
- Lobster Clasp. This gold chain necklace is fastened with a lobster clasp. ...
- Toggle Clasp. This gold chain bracelet has a jeweled toggle clasp. ...
- Box Clasp. This gold rope chain was changed from a lobster clasp to a box clasp. ...
- Bolo Clasp. An evil eye bracelet with a bolo clasp. ...
How to repair jewelry clasp?
What Are the Steps to Jewelry Repair?
- Lobster clasp repair: Realign the hook and latch of a bent clasp by carefully moving them with needle-nose pliers until the parts meet.
- Fold-over clasp repair: Bend the tab back onto itself if the clasp doesn’t snap closed. ...
- Spring-ring clasp repair: Remove the ring by opening the loop holding the spring ring to the jewelry piece. ...
How to make a bracelet without a clasp?
- 1 foot (0.3 m) black paracord
- 5.5 feet (1.7 m) orange paracord
- 3 feet (0.9 m) orange paracord
- 3 feet (0.9 m) grey paracord
How do you fix a necklace?
How to Get Kinks Out of Gold Chains
- Lay a thin microfiber cloth on a flat surface such as a table or countertop.
- Unhook the necklace and stretch it out to its full length. Examine the chain carefully to determine where the kink is located.
- Dab your middle and index fingers with baby oil. ...
- Work the crease out of the necklace using your fingers. ...
How do you reattach a necklace clasp?
1:152:20How-to: Attach or Replace a Clasp - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen I'm gonna go in with the other jump ring open it up again and slide it on the other. Side. TakeMoreThen I'm gonna go in with the other jump ring open it up again and slide it on the other. Side. Take both of my pliers. And I like to wiggle a little bit and snug it right up.
How do you fix a chain clasp on a necklace?
0:111:33How To Fix A Clasp - YouTubeYouTubeStart of suggested clipEnd of suggested clipToday's lesson is how to reattach a clasp with a broken jump ring I've got some simple tools I'veMoreToday's lesson is how to reattach a clasp with a broken jump ring I've got some simple tools I've got a couple of pair of pliers. And that's about all we.
Can a chain clasp be repaired?
You need to replace the broken clasp with a new one. When purchasing a new clasp, the safest bet is to buy one that is similar in size and shape to the old one. This will ensure your jewelry will fit and wear the same way. Once you've found the right one, attach your new jewelry clasp.
How much does it cost to fix a clasp on a necklace?
Replacing a Clasp: $65-$250+ Depending on the style, the size, and the type of metal the clasp is made of, this can cost you between $65 and $250. To give you a better idea of what your clasp replacement might cost, a standard gold 5 mm spring ring clasp can cost $30.
How do you fix a chain clip?
1:3512:38How to Fix Broken Chain Necklaces jpg - YouTubeYouTubeStart of suggested clipEnd of suggested clipTaking it past the point where you think it's close tight and it'll kind of spring back in placeMoreTaking it past the point where you think it's close tight and it'll kind of spring back in place that addition of a jump ring then will allow you to either add your new clasp.
How do you fix a necklace clasp that won't close?
0:291:34How to Fix a Clasp - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what we're gonna do is we're going to take a simple tap. And we're gonna actually open up thatMoreSo what we're gonna do is we're going to take a simple tap. And we're gonna actually open up that area. So what we're gonna do is I'm going to take the tack I'm gonna apply a little bit of pressure.
How do you fix a lobster clasp necklace?
0:293:37Fixing a Broken Lobster Clasp - How to Repair Jewelry At Home!YouTubeStart of suggested clipEnd of suggested clipSo that still works it's just a little bent and we'll close that gap so we have some pliers hereMoreSo that still works it's just a little bent and we'll close that gap so we have some pliers here jump ring pliers they're round.
What is a claw clasp?
Also called lobster clasp and lobster hook, the claw clasp is a jewelry fastener that is held closed by a spring. It is one of the most popular styles of jewelry clasps on the market. Claw clasps are frequently seen on necklaces and bracelets and are designed to be easy to grasp, open and close.
Can necklace chains be repaired?
Yes, it can be repaired. However, a golden rope chain belongs to the types of chains that aren't as straightforward in repairing. It's hard to maintain its original integrity because of the way it is constructed once it is broken. Gold rope chains are made with delicate, tiny interlocking rings of gold.
What is the clasp on the necklace called?
Hook and Eye Clasp - The easiest and simplest clasp, containing two pieces; one is a hook and the other a circle. The hook slips into the circle to secure the necklace in place.
What is chain soldering?
Chain soldering is the process of mending breaks in chains with solder, a metal alloy that is fusible and has a low melting point. The solder holds the two disconnected pieces together (like a glue), and its low heat point means that it can be melted without affecting the rest of the metal.
Can a lobster claw clasp be repaired?
0:562:47How I fixed a lobster clasp spring cheap and fast! - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the little clip fell out. And then uh as you can see here it's repaired now this is the one thatMoreAnd the little clip fell out. And then uh as you can see here it's repaired now this is the one that was in my chain.
Supplies Used to Replace a Broken Necklace Clasp
Items linked below may go to similar items when exact items couldn't be found online. Links are affiliate so when you purchase, I will get a small kickback to help fund the next tutorial!
How to Fix a Broken Necklace Clasp
First, open the jump ring on the necklace that is attached to the broken lobster clasp. To open, use 2 pairs of jewelry pliers or even needle nose pliers and pinch each side of the ring.
Introduction
Barrel clasps are on many pieces of jewelry, but there are only guides available on how to replace the clasp—not how to repair it. Taking a broken necklace to a jeweler or completely replacing the clasp can be expensive and time-consuming.
Step 1 Necklace Barrel Clasp Repair
Locate the broken part of the ring that attaches through the back of the barrel clasp.
Step 2
Plug in the electric soldering iron and set the solder temperature to the degrees that suits the melting point of both the soldering wire and the barrel clasp.
