How to Repair a Peerless Faucet That Won't Swivel
- Turn off the water shutoff valves under the sink and open the faucet to drain water. ...
- Unscrew the handle retaining screw underneath the lever with a 1/8-inch Allen wrench. ...
- Wrap a rubber glove around the metal collar that holds the valve in place and grip the collar with adjustable pliers.
How to repair low pressure in a kitchen faucet?
- Shut off the water supply to the faucet and keep the faucet handle in turn-on position so all the remaining water from the faucet will be wiped out.
- Cover the sink drain with any cloth or plastic so by mistake any faucet part or screw doesn’t run down in the drain.
- Now locate the screw and remove its cap with the help of a screwdriver.
How to repair a single lever Moen kitchen faucet?
Rotary Ball Faucet
- Look at the lower-front of the faucet to find the screw that holds the handle to the faucet. ...
- Remove the large, chrome cap underneath, using pliers or an adjustable wrench.
- Take off the nylon cam and the plastic packing rings that cover the top of the ball. ...
- Note the way the circular rubber seals and springs sit inside the faucet. ...
How to stop a peerless faucet from dripping?
- If the handle has a cap, remove it with a flat head screwdriver. Use a Phillips screwdriver to unscrew the handle.
- Remove the faceplate behind the handle from the shower wall. ...
- Find the metal sleeve over the shower valve. ...
- If the shower valve has a locking clip, pry it off with needle nose pliers or a screwdriver.
How to fix a stripped faucet handle fast?
Install the New Faucet Stem
- Use a piece of cloth to clean inside the shower valve to remove any debris or mineral deposits.
- Push in the new faucet stem and tighten it using the wrench.
- Install the escutcheon as it was.
- Slide in the handle and secure it with a screw.
- Try turning the faucet handle and check if it is working as it should.
- Unplug the shower/tub drain.
How do you fix a dripping Peerless Faucet?
What do I do if my single-handle kitchen or lavatory faucet drips from the aerator?Remove the aerator (it should twist off by hand).Turn off the water supplies.Turn the faucet handle to the "on" position.Turn the water on at the supply.Flush the faucet and supply lines for one minute.More items...
How do you remove a handle from a Peerless kitchen faucet?
Look for the nylon locknuts holding the body of the faucet to the countertop or sink. The locknuts twist onto two threaded shanks connected to the underside of the Peerless faucet body. Rotate the locknuts counterclockwise to remove them from the shanks and release the faucet.
Why is my Peerless Faucet leaking?
If your Peerless faucet is leaking from under the handle, it's usually because the retaining nut holding the cartridge or ball valve is loose. Luckily it can be fixed in a couple of simple steps: To access it, you have to remove the handle and the dome-shaped collar. Then, you can tighten it with pliers.
How do you fix a leaky faucet with one handle?
0:543:00How to Fix A Dripping or Leaky Single Handle Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can replace one specific part but it's usually best to get a kit and replace all the parts alsoMoreYou can replace one specific part but it's usually best to get a kit and replace all the parts also buy a new aerator if yours is damaged.
How do you remove a peerless faucet handle without a visible allen screw?
If the set screw is visible, hold the faucet in place and tighten the screw. If you can't see the screw, it will be under the cap, which you can remove with a flathead screwdriver or your small knife. Tighten the screw while holding the handle in place. Once the screw is tight, the handle should stop shaking.
How do you take apart a kitchen faucet?
0:151:24Kitchen Sink Faucets : How Do I Take Apart a Faucet? - YouTubeYouTubeStart of suggested clipEnd of suggested clipCan be removed simply by loosen the locknut. Now this lock nuts at the bottom of the spout. Some ofMoreCan be removed simply by loosen the locknut. Now this lock nuts at the bottom of the spout. Some of them were like to be located across the top unscrew that lift that spout off.
How do you change the O ring on a Peerless kitchen faucet?
0:231:33Leaky Faucet Base – O-Ring Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd u o-rings onto the faucet body within their group slots making sure the o-rings are not twisted.MoreAnd u o-rings onto the faucet body within their group slots making sure the o-rings are not twisted. Apply silicone grease to the o-rings. Once mounted on the spout base reinstall. The spout handle.
How do you fix a dripping kitchen faucet with two handles?
0:424:49How to Repair a Leaky Two-Handle Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you determine the trouble stem you'll need to turn off the water. Next remove the handle with aMoreOnce you determine the trouble stem you'll need to turn off the water. Next remove the handle with a Philips head screwdriver. So that the stem is visible.
How do you fix a leaky faucet with two handles?
1:382:54How To Fix A Dripping or Leaky Double Handle Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst take off the handle. Then unscrew the valve stem on the stem remove the old gasket screw. AndMoreFirst take off the handle. Then unscrew the valve stem on the stem remove the old gasket screw. And seat washer. Apply some plumbers grease.
Why is my single handle faucet leaking?
This single-handled kitchen faucet has a cartridge under the handle. The cartridge has holes that mix the hot and cold water to deliver different temperatures depending on how the handle is turned. If it's worn or cracked, water will seep through to the spout.
How do you remove a single handle faucet cartridge?
1:382:51How to Remove a Faucet Cartridge - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt using an allen wrench. Then lift it off twist the bonnet nut counterclockwise to remove it liftMoreIt using an allen wrench. Then lift it off twist the bonnet nut counterclockwise to remove it lift out the cam. Then the packing and ball valve remove the seats and springs using a small screwdriver.
Why does my faucet drip after I turn it off?
If you notice your bathroom sink drips or leaks out of the faucet head when turned off, there is likely an issue with the seal inside the faucet head, allowing the water to run through or drip. Before calling a professional plumber, consider whether you're able to repair the leak in your bathroom sink yourself.
How do you remove a lever kitchen faucet handle?
2:513:44How to Remove a Faucet Handle - YouTubeYouTubeStart of suggested clipEnd of suggested clipAgain make sure that the drain is closed or covered. This is a tiny screw.MoreAgain make sure that the drain is closed or covered. This is a tiny screw.
How do you install Peerless kitchen handles?
1:043:51How to Install a Peerless Two-Handle Kitchen Faucet with SprayerYouTubeStart of suggested clipEnd of suggested clipMake sure the gasket is seated properly and the escutcheon is centered and parallel to the wall orMoreMake sure the gasket is seated properly and the escutcheon is centered and parallel to the wall or backsplash. If the deck surface is rough or uneven use silicone under the gasket.
How do you tighten a peerless faucet handle?
3:214:37Delta Peerless Bathroom Single Handle Faucet Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipOn. You turn the water back off so that you can push your handle back so the set screw can beMoreOn. You turn the water back off so that you can push your handle back so the set screw can be tightened.
How do you install Peerless Universal fit LAV kitchen handles?
0:131:04Installing Universal Sink Handles - YouTubeYouTubeStart of suggested clipEnd of suggested clipSelect the adapter that best fits your handle broach. And place it on top of the stem. Tighten theMoreSelect the adapter that best fits your handle broach. And place it on top of the stem. Tighten the adapter with the screwdriver. Place the new handle over the adapter.
What do I need to repair a peerless faucet?
Things You'll Need. Allen wrench. Pliers or wrench. Towel. Replacement ball valve for Peerless faucets. To repair a Peerless faucets, you will use the same process used for several similar faucets made by other manufacturers. You will partially disassemble the faucet, so it helps to have some experience taking things apart.
How do I fix a leaky faucet?
Use pliers or the tip of a screwdriver to push the plastic washer under the handle (now on top of the faucet head) left to loosen it. Then push it back right to tighten it, reassemble the faucet and test it. This will correct leaks in some cases. If the leak persists, move on to the next step.
How to remove a bonnet nut from a faucet?
Loosen the bonnet nut (small dome-shaped nut) on the faucet head with a pair of pliers. Drape a towel over the nut before gripping it with pliers to avoid scratching the part. Remove the nut after you loosen it.
What to do if a faucet doesn't work?
If that doesn't work, remove the valve seat with a seat wrench and replace it. If the faucet has ceramic disk or cartridge valves, try replacing the gaskets in the water inlet holes or replacing the entire valve, if it appears damaged. Advertisement.
What to do after removing a faucet valve?
If the faucet was leaking from the spout, and the faucet has compression valves, replace the washer on the base of each valve. If that doesn't work, remove the valve seat with a seat wrench and replace it.
What to do if your faucet aerator is blocked?
Advertisement. Sometimes, a blocked faucet aerator will prevent water from flowing through the spout, causing it to back up and leak from the base. If you notice a leak accompanied by low flow, unscrew the aerator, flush it out under the faucet and soak it overnight in vinegar to dissolve mineral deposits.
What does it mean when a sink faucet leaks from the base?
Peerless Faucet Leaking from Base. When water seeps onto the sink deck from under the faucet, that usually indicates a worn O-ring at the base of the spout, and it usually happens only with swivel-spout models. With the faucet turned off, loosen the collar around the base of the spout with pliers, then pull the spout off the faucet assembly.
What is a valve puller?
In some cases, you may need to use a valve puller, which is a corkscrew-like device available at hardware and plumbing supply stores.
Can you repair a peerless faucet?
A Peerless kitchen faucet repair is fairly straightforward when the faucet has two handles, because diagnosing valve problems is easier when there is one valve dedicated to hot water and the other one to cold. You'll usually encounter one of three scenarios: the faucet is leaking from the spout, it's leaking from the handle or your Peerless faucet ...
What is a peerless faucet?
Peerless faucets represent the low end of Masco's faucet line, and Peerless faucet reviews, including the one from Starcraft Custom Builders, are generally lukewarm due to their predominantly plastic construction and utilitarian appearance. However, what they lack in style, they make up in design simplicity and repairability, ...
What is the advantage of peerless faucets?
One of the advantages of choosing a budget faucet, such as a Peerless, is the ready availability of such parts, which come in model-specific repair kits, . And if your Peerless faucet is leaking, you'll probably need one of these kits. Advertisement.
What to do if aerator doesn't work?
Scale can also clog the valve, so if cleaning the aerator doesn't work, try removing the valve and soaking it in vinegar. If the faucet has a cartridge valve, and the valve is clogged with limescale, you may have a hard time removing it.
How to stop a faucet from leaking?
Finally, if the faucet is leaking from the handle, you can usually stop the leak by tightening the valve retaining nut.
Is it expensive to replace gaskets?
The parts aren't expensive , and replacing all of them, especially the gaskets, O-rings and springs, is the surest way to guarantee a successful repair. Advertisement.
Do Delta faucets have ball valves?
This could account for the large number of ball-valve models available, as ball valves are a feature of Delta faucets. Besides ball valves, a significant number of Peerless faucets have cartridge valves, particularly double-handled widespread models and tub-and-shower faucets.
How to soften O rings on a spout?
Drop some penetrating oil into the space between the spout housing and the valve seat. Wait about 10 minutes for it to lubricate the O-rings, then try swiveling the spout. If it doesn't move, apply more oil. You also can try pouring boiling water into the gap to soften the O-rings.
How to remove old O rings from valve?
Coat new O-rings with plumber's grease, slide them over the valve housing , and work them into the grooves from which you removed the old ones. Spread a little more plumbing grease around the outside of the vale seat and the inside of the spout housing, and slide the housing back onto the valve seat.
Does a peerless faucet have a ball valve?
By Chris Deziel. Peerless and Delta faucets have a similar design, because the same company manufactures both brands. That means your Peerless kitchen faucet probably has a ball valve, as opposed to a cartridge, because Delta pioneered this type of faucet. If it has a swivel spout, and the spout won't swivel, you have to remove the ball to make ...
How to balance spool and sleeve?
First, breathe into a paper bag until your feelings of panic fade. Then keep reading. The parts of the Scald-Guard pressure balance valve that blend the hot and cold water are known as the spool and sleeve. If they aren’t working properly, they may have been affected by mineral deposits building up over time. To solve this problem, follow the steps below based on your model.
How to position knob handle?
Knob handle stem position: Slip the stem unit into the body, aligning the tabs on the stem with the slots in the body, so the "stop" on each stem points toward the spout. Lever handle stem position: Align the tabs on the stem with the slots in the body, so the "stop" on each stem points toward the right.
Techniques for solving a tough faucet problem
Repair a drippy ball-type faucet using these pro tricks to deal with stubborn screws. You may have to replace the handle, but not the entire faucet.
Kitchen Faucet Repair: Loosen a stuck screw on a single-handle faucet
If the Allen screw is stuck, or if you strip it so it won’t come out, remove the cap with the handle still in place. You can’t grab the flattened edges with the handle in place. Instead, for this kitchen faucet repair, cushion the jaws of pliers and grip the round edge below.
How to Remove Faucet Handle
If you can’t loosen the Allen screw on the handle of a ball-type faucet, don’t let that 15¢ screw force you into a $100 faucet replacement… just yet! Normally you have to remove the handle to get the worn rubber seats that cause the drip (Figure A). First try spraying the screw with penetrating oil every day for a week.
Required Tools for this kitchen faucet repair Project
Have the necessary tools for this DIY kitchen faucet repair project lined up before you start—you’ll save time and frustration.
Required Materials for this kitchen faucet repair Project
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here’s a list.
