
Peerless Faucet Repair Instructions
- Step 1. Turn the water valve under the sink to the closed position. Sorry, the video player failed to load.
- Step 2. Take off the handle to the Peerless faucet by removing the screw at the bottom of the handle with an Allen...
- Step 3. Use pliers or the tip of a screwdriver to push the plastic washer under the handle (now on top of the...
How to stop a peerless faucet from dripping?
- If the handle has a cap, remove it with a flat head screwdriver. Use a Phillips screwdriver to unscrew the handle.
- Remove the faceplate behind the handle from the shower wall. ...
- Find the metal sleeve over the shower valve. ...
- If the shower valve has a locking clip, pry it off with needle nose pliers or a screwdriver.
How do you repair a shower faucet?
- Turn the shower off and take out the handle
- Also, take out the escutcheon plate. ...
- Get a plier and, with it, loosen the locking nut and pull the cartridge from the valve’s center.
- Next, push a new rubber seat along with a spring into the valve by putting it on the end of a pencil and pushing it in. ...
- In the existing valve, put in the new cartridge
How to replace a diverter valve in a peerless faucet?
Two-Handled Faucet Diverter
- Reach under the sink to rotate the hot and cold water supply valve clockwise. ...
- Place a rag over the cap behind the two-handled faucet spout. ...
- Insert a butter knife or a nickel into the slot at the top of the diverter. ...
- Wrap the clean diverter threads in one or two layers of thread-seal tape. ...
- Replace the faucet cap on the faucet body. ...
How to repair Price Pfister shower faucet?
Repairing a Leaking Price Pfister Shower Faucet (replacing/tuning Up the Cartridge)
- It Leaks, and Its Annoying. So the way these things work is, your handle works kind of like an airlock.. ...
- Removing the Handle. Underneath the handle there should be a small hole with a hex head screw in it, its a set screw to keep you from being ...
- Clearing a Path. ...
- The Internal Cartridge. ...
- Checking for Damage. ...

How do you fix a leaky Peerless shower faucet?
0:412:25How to Fix a Leaky Tub/Shower Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd pull the cartridge out of the valve. Once that is done use silicone grease to lubricate theMoreAnd pull the cartridge out of the valve. Once that is done use silicone grease to lubricate the inside of the valve body about one inch as well as the exterior rubber components on the new cartridge.
How do you change a Peerless shower faucet cartridge?
0:000:46Shower Cartridge Replacement | The Home Depot - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure it's positioned correctly according to the manufacturer's. Instructions then push itMoreMake sure it's positioned correctly according to the manufacturer's. Instructions then push it firmly into the valve making sure the marks in the cartridge. Line up with the slots on the valve.
How do you remove a Peerless shower valve?
0:093:23Remove Peerless shower handle - DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you can use your fingers to carefully grab it off and you'll notice how it secures itself in itMoreAnd you can use your fingers to carefully grab it off and you'll notice how it secures itself in it has all these little teeth. So carefully set that aside grab your phillips screwdriver.
How do you take apart a Peerless tub faucet?
0:004:37Delta Peerless Bathroom Single Handle Faucet Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd just use a small slotted screwdriver and pry off the decorative cover to loosen that set screwMoreAnd just use a small slotted screwdriver and pry off the decorative cover to loosen that set screw you can use 1/8 inch allen wrench or you can get this combo tool and this has 1/8 inch allen wrench.
How do you remove a Peerless faucet handle without a visible allen screw?
If the set screw is visible, hold the faucet in place and tighten the screw. If you can't see the screw, it will be under the cap, which you can remove with a flathead screwdriver or your small knife. Tighten the screw while holding the handle in place. Once the screw is tight, the handle should stop shaking.
How do I know if my shower cartridge is bad?
There are a few ways to tell if your shower cartridge has gone bad:Dripping or running water when you turn your shower off (most common)Difficulty turning the shower handle, which worsens over time.Shower handle gets stuck or “slips” and doesn't turn on the water.
How do you disassemble a Peerless shower head?
1:3312:58How To Disassemble a Shower Head to Clean. [Mira Shower ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure you can feel like it's Taylor nothing's breaking just keep turning you see such a sight toMoreMake sure you can feel like it's Taylor nothing's breaking just keep turning you see such a sight to unscrew. And that goes unscrews.How To Disassemble a Shower Head to Clean. [Mira Shower ... - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you disassemble a Peerless shower head?
How do you fix a shower faucet stem?
1:157:15How to Repair a Shower Valve Stem | Ask This Old House - YouTubeYouTubeStart of suggested clipEnd of suggested clipA good tip is to make sure you have something in the tub drain. So you don't drop it right down theMoreA good tip is to make sure you have something in the tub drain. So you don't drop it right down the drain. All right so there's that and what's behind here is a Phillips screw.How to Repair a Shower Valve Stem | Ask This Old House - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you fix a shower faucet stem?
How do you remove a peerless faucet handle?
Look for the nylon locknuts holding the body of the faucet to the countertop or sink. The locknuts twist onto two threaded shanks connected to the underside of the Peerless faucet body. Rotate the locknuts counterclockwise to remove them from the shanks and release the faucet.How to Remove Peerless Lever-Handle Faucets - Home Guideshttps://homeguides.sfgate.com › remove-peerless-leverhan...https://homeguides.sfgate.com › remove-peerless-leverhan...Search for: How do you remove a peerless faucet handle?
How do you remove a Peerless faucet handle?
Look for the nylon locknuts holding the body of the faucet to the countertop or sink. The locknuts twist onto two threaded shanks connected to the underside of the Peerless faucet body. Rotate the locknuts counterclockwise to remove them from the shanks and release the faucet.
Are Delta and Peerless cartridges the same?
The products are interchangeable since Peerless and Delta fall under the same company.
What kind of shower cartridge do I have?
1:383:16Who Made Your Shower Faucet? Tips to Find the Brand and ManufacturerYouTubeStart of suggested clipEnd of suggested clipOff and then you can look behind the plate to see if there's a sticker in here that has theMoreOff and then you can look behind the plate to see if there's a sticker in here that has the manufacturer.
How do you install a Peerless bathroom faucet?
0:564:53How to Install a Peerless Two-Handle Centerset Bathroom FaucetYouTubeStart of suggested clipEnd of suggested clipNow to begin first attach your faucet. Place the gasket on the bottom of the new faucet. And placeMoreNow to begin first attach your faucet. Place the gasket on the bottom of the new faucet. And place the faucet through the mounting holes in the sink.
What is a peerless faucet?
Peerless faucets represent the low end of Masco's faucet line, and Peerless faucet reviews, including the one from Starcraft Custom Builders, are generally lukewarm due to their predominantly plastic construction and utilitarian appearance. However, what they lack in style, they make up in design simplicity and repairability, ...
What is the advantage of peerless faucets?
One of the advantages of choosing a budget faucet, such as a Peerless, is the ready availability of such parts, which come in model-specific repair kits, . And if your Peerless faucet is leaking, you'll probably need one of these kits. Advertisement.
What to do if aerator doesn't work?
Scale can also clog the valve, so if cleaning the aerator doesn't work, try removing the valve and soaking it in vinegar. If the faucet has a cartridge valve, and the valve is clogged with limescale, you may have a hard time removing it.
How to stop a faucet from leaking?
Finally, if the faucet is leaking from the handle, you can usually stop the leak by tightening the valve retaining nut.
Do Delta faucets have ball valves?
This could account for the large number of ball-valve models available, as ball valves are a feature of Delta faucets. Besides ball valves, a significant number of Peerless faucets have cartridge valves, particularly double-handled widespread models and tub-and-shower faucets.
After turning off my pull-out spray faucet, water continues to drip for a minute or so. Is something wrong?
After turning off my pull-out spray faucet, water continues to drip for a minute or so. Is something wrong? Nope, it’s supposed to do that. That’s just water emptying from your faucet’s aerator and hose.
After turning off my shower, water continues to drip from the showerhead for a minute or so. Is something wrong?
Remain calm. That’s just the showerhead emptying its reservoir of water, which is a perfectly natural thing for a showerhead to do.
My Bath Sink One-Handle faucet is leaking. What should I do?
Identify the area that is leaking. Then, find the solutions to that area below.
My Bath Sink Two-Handle Centerset faucet is leaking. What should I do?
Identify the area that is leaking. Then, find the solutions to that area below.
My Bath Sink Two-Handle Mini-Widespread faucet is leaking. What should I do?
Identify the area that is leaking. Then, find the solutions to that area below.
My Bath Sink Two-Handle Widespread faucet is leaking. What should I do?
Identify the area that is leaking. Then, find the solutions to that area below.
My faucet leaks. Should I take it back to the dealer?
We’re sure your dealer would be delighted to see you. But you probably won’t have to take that step. In most cases, a faucet leak can be repaired with Peerless® Genuine Parts. If you still have your installation instructions for the faucet, check the troubleshooting section for repair information.
How to soften O rings on a spout?
Drop some penetrating oil into the space between the spout housing and the valve seat. Wait about 10 minutes for it to lubricate the O-rings, then try swiveling the spout. If it doesn't move, apply more oil. You also can try pouring boiling water into the gap to soften the O-rings.
How to remove old O rings from valve?
Coat new O-rings with plumber's grease, slide them over the valve housing , and work them into the grooves from which you removed the old ones. Spread a little more plumbing grease around the outside of the vale seat and the inside of the spout housing, and slide the housing back onto the valve seat.
Does a peerless faucet have a ball valve?
By Chris Deziel. Peerless and Delta faucets have a similar design, because the same company manufactures both brands. That means your Peerless kitchen faucet probably has a ball valve, as opposed to a cartridge, because Delta pioneered this type of faucet. If it has a swivel spout, and the spout won't swivel, you have to remove the ball to make ...
What is a peerless shower faucet?
Peerless Cartridge Faucet Repair. Peerless shower and tub faucets and double-handle faucets usually have cartridge valves, as do some single-handle faucets. When these faucets leak, the problem may be worn gaskets in the inlet holes, worn O-rings or damaged cartridges. When the faucet leaks, it's usually a good idea to replace everything, ...
How much does it cost to replace a peerless faucet?
Replace the cartridge and all the O-rings and gaskets. A Peerless faucet cartridge along with all its O-rings usually costs less than $20, so the repair shouldn't be expensive.
Why is my peerless faucet leaking?
If your Peerless faucet is leaking from under the handle, it's usually because the retaining nut holding the cartridge or ball valve is loose. To access it, you have to remove the handle and the dome-shaped collar, then you can tighten it with pliers. You shouldn't have to turn off the water to make this repair.
Why is my faucet leaking from the spout?
When a ball-valve faucet is leaking from the spout, the problem can usually be traced to the rubber gaskets covering the water inlet holes inside the valve housing and the springs behind them. The purpose of the springs is to push the gaskets against the ball when the water is off. When they wear out, water begins seeping through and comes out the spout. To replace the springs and gaskets, you have to remove the ball assembly:
How to remove a valve handle?
Remove the handle, using either a 1/8-inch hex wrench or a Phillips screwdriver. Unscrew the dome-shaped ball cover. You can usually do this by hand. Unscrew the ball retainer, using a pair of locking pliers. Lift out the ball to expose the two gaskets in the bottom of the valve housing.
How to get stuck valve out of cartridge?
Grasp the valve stem with pliers and lift out the cartridge. If it's stuck, pour in some vinegar to dissolve the mineral deposits binding it. Wait a few hours and try again. Check inside the valve housing for rubber gaskets in the inlet holes and lift out any you find using a screwdriver.
Is it normal for a shower to have pencil flow?
While it's normal for a pencil-thin flow to come from the tub spout when the shower is on, any more than that means that you may need to replace the diverter, which means replacing the tub spout. Advertisement. references. Peerless: About Us.
