Method 1.
- Remove the gate from the hinge post by pulling the pins out of the hinges. Set the gate aside.
- Unscrew the remaining sides of the hinges from the hinge post.
- Drill out the holes using a 1/4" bit.
- Insert short lengths of 1/4" dowel into the holes.
- Cut the dowels flush with the surface of the post.
- Drill pilot holes for the hinge screws into the dowels.
- Screw the hinges back onto the hinge post.
- Replace the gate and secure the hinge pins.
How to repaint a picket fence?
The Best Way to Paint an Old Picket Fence
- Prepare the fence by scraping off any old loose paint with a paint scraper. ...
- Replace any boards that have rotted with new ones. If any of the rails are sagging, pry off the boards that are attached to it, replace it and screw ...
- Tie back any shrubs or flowers around the fence with twine and cover them with plastic sheeting. ...
How to recycle picket fence?
Reuse Old Fence Boards!: As fences age, they start to fall apart and generally look pretty decrepit. I found that although the boards are very old (up to 50 years in some cases), if they are made out of cedar, they can be in pretty good shape, have lots of integrity left, …
How to build a custom picket fence?
- Use a level to plumb the first picket. Use a spacer block to set the consecutive pickets. ...
- Secure each picket with No. 8 1-1/2-inch deck screws or galvanized 1-1/2-inch nails. ...
- Depending upon the width of your picket, use 2 or 3 fasteners per rail.
- On a slopped yard, attach a picket at each post. ...
How to replace pickets on a 6 ft wood fence?
- Fence Posts: Posts are generally set 8 feet apart from each other.
- Number of Posts = Fence Length/8.
- Posts are typically sold in 8-foot or 16-foot sections.
- Sections set longer than 8 feet apart will sag.
- Rails: If the fence has rails, they should be 8 feet long and set between the posts.
How do you fix a split fence picket?
0:012:12How to Repair a Broken Fence (Picket) - YouTubeYouTubeStart of suggested clipEnd of suggested clipApply some on to the fence post it's broken onto the picket that's broken. Also apply some glue onMoreApply some on to the fence post it's broken onto the picket that's broken. Also apply some glue on the back side of our repair board and then we'll put it all together we'll use the clamps to hold.
How do you fix a loose picket?
0:454:30How to fence repair, replace fence pickets, replace fence post. Easy!YouTubeStart of suggested clipEnd of suggested clipBroken. Once you get the nails prepped removed or cleaned up you can go ahead and get ready toMoreBroken. Once you get the nails prepped removed or cleaned up you can go ahead and get ready to install your picket now this is a three and a half inch dog gear. You can see the little dog ear.
How do you restore a picket fence?
0:524:28How To Revive an Old Fence - Ready Seal - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow I recommend you start with a three parts water one part bleach mixture.MoreNow I recommend you start with a three parts water one part bleach mixture.
How do you fill gaps in a picket fence?
4:034:28Cover Gap on Wood Fence - YouTubeYouTubeStart of suggested clipEnd of suggested clipBring it down here and just cut it right there and then staple that down and just continue on downMoreBring it down here and just cut it right there and then staple that down and just continue on down and that'll keep that uh all those gaps filled so that you have some privacy in your yard.
How do you repair an old wood fence?
0:002:46Different Methods To Restore an Old Fence with Ready Seal - YouTubeYouTubeStart of suggested clipEnd of suggested clipStarted. As you can see the fence is cleaning up bringing it back to life before I to the true woodMoreStarted. As you can see the fence is cleaning up bringing it back to life before I to the true wood before I'm able to plot ready-seal. And that's what we want it to look.
How do you fix a wobbly fence?
1:158:49Can We Use Post Foam to FIX Our Wobbly Fence Posts? - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlace it back in the hole. Place third over top of it. And what this does is it forces the foam downMorePlace it back in the hole. Place third over top of it. And what this does is it forces the foam down into all of the voids. And once it hardens. It's really gonna firm up this post.
How do you repair a white picket fence?
0:001:33How to Repair a Fence Picket - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe use outdoor screws to attach the pickets in place. We attached one screw on each side as the oldMoreWe use outdoor screws to attach the pickets in place. We attached one screw on each side as the old screw was in the middle. Once all four boards were in place we put some putty over the screw holes.
Is it worth staining an old fence?
Whether your wooden fence is years old or newly installed, it can benefit from a single inexpensive addition: stain. Applying wood stain to the slats improves its design and prolongs the lifespan of your hard-working outdoor structure—a win-win!
How can I make my fence panels look better?
Give your fence a modern look. (Image credit: Future / Paul Raeside) ... Set up raised beds against a fence. ... Turn your fence into a vertical garden. ... Paint a picket fence. ... Opt for mixed materials. ... Drape a trellis with climbing flowers. ... Light up a garden fence. ... Take your fence decorating ideas to the next level with color.More items...•
How do you cover gaps in fence?
1:037:45How To Fill Open Areas Under Wood Fences - Home Repair TipsYouTubeStart of suggested clipEnd of suggested clipAnd they used railroad ties they just simply put some railroad ties in there. And if the gap isn'tMoreAnd they used railroad ties they just simply put some railroad ties in there. And if the gap isn't too big and maybe you could simply go down to your local Home Improvement Center.
Should I leave a gap between fence pickets?
Why do you need a space between the pickets and the ground? When wood pickets touch the ground, they absorb moisture, which can lead to swelling or rot. Leaving a space between the pickets and the ground prevents this moisture absorption from occurring, giving you a longer-lasting and nicer-looking fence.
Why does my fence have gaps?
Air circulation. One reason why fences have gaps is to allow air to circulate the area it surrounds. The bigger the gaps, the more air you can let in. This is important for homes that are exposed to heat; not letting the air circulate would mean a more uncomfortable area for your home.
How do you replace a plank on a fence?
1:068:26How to repair a wood privacy fence, replacing boards with or without cutsYouTubeStart of suggested clipEnd of suggested clipIn to hold it in position we'll go on the other side of the fence. And we'll mark and cut our boardsMoreIn to hold it in position we'll go on the other side of the fence. And we'll mark and cut our boards then won't take our old boards off and we'll replace them with new boards.
How do you replace an aluminum fence picket?
2:275:58K Brothers Tips - Replacing an Aluminum Fence Section - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow that you've removed the post screws or C to remove the damaged section by taking the sectionMoreNow that you've removed the post screws or C to remove the damaged section by taking the section pulling away from the cut end. And then pull out the other end from the post.
How do you restore a white picket fence?
1:452:44How to repaint a picket fence - YouTubeYouTubeStart of suggested clipEnd of suggested clipStart by painting the board that runs along the bottom of your fence with your paintbrush. BeMoreStart by painting the board that runs along the bottom of your fence with your paintbrush. Be careful not to pick up any dirt from the ground. Then painting the valleys where your roller can't. Reach.
How do you repair a vinyl fence slat?
0:533:23Vinyl Fence section repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe slide the top rail over lift it up on slide it out of the post. And remove it once the top railMoreWe slide the top rail over lift it up on slide it out of the post. And remove it once the top rail is off it's easy enough to remove the slats.
Step 1: Materials
1) Wood Glue, 2) 2 C Clamps. Skill Level: Easy Time to Complete: 5 – 10 minutes to assemble and clean up. 30 minutes – 24 hours drying time. Cost: Less than 50 cents worth of glue.
Step 3: Clamp
Clamp the pieces together and wipe off extra Glue. Let Dry – Wait 24 hrs for best results.
Introduction
A broken fence may cause many issues, such as your pet getting out, the pesky home owners association giving you a fine, or maybe you just do not like the way it looks. Replacing a picket on a wooden fence is much easier than it seems, and this guide is here to prove that.
Step 1 Picket
IMPORTANT: This step will need to be completed before continuing. You will need to use these measurements to purchase a replacement picket needed later in the guide.
Step 2
Place the tip of the pry bar under the picket, in line with the nails.
Step 3
Only complete this step if there are still nails in the wood after you have removed the picket. If all nails are removed, continue to Step 4.
Step 5
Caution: This step involves hitting nails with a hammer in close proximity to your fingers. Work gloves are recommended if you are unfamiliar with using a hammer.
