See more
Can you repair a PS4 controller?
Yes, GameStop will fix your PS4 controller. They have a dedicated controller repair service called the Controller Fix.
How do I pair my PS4 controller?
Reset the DUALSHOCK 4 wireless controller Use a small tool to push the button inside the tiny hole. Hold the button down for roughly 3-5 seconds. Connect the controller to the PS4 console using a USB cable and press the PS button. If the light bar turns blue, the controller has paired.
Why is my PlayStation 4 controller not working?
If your controller is working enough to access menus, hold the PS Button to open the Quick Menu, then go to Power > Restart PS4 to reboot your system. In case your controller isn't cooperating, press and hold the Power button on your PS4 console until you hear two beeps.
How do I fix my PS4 controller at home?
0:001:10How to fix PS4 controller drift | Asurion - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a paperclip to press and hold the reset button on the back of the controller for 5-10 seconds ifMoreUse a paperclip to press and hold the reset button on the back of the controller for 5-10 seconds if none of that works the analog stick may be damaged.
Why is my PS4 controller blinking white and not connecting?
For instance, the DualShock controller light doesn't usually flash white. There are two main reasons you might see the flashing white light on your DualShock controller: either the battery is dying, or the controller failed to connect to your PlayStation console.
Why is my PS4 controller flashing blue and not connecting?
If your PS4 controller is blinking blue, then that means that it's trying to connect to your console. Normally this only takes a few seconds before it properly connects. The problem is that sometimes you'll be sitting around for seconds, and then minutes, before figuring out that it's not working.
Why is my controller not working?
Verify that your controller batteries aren't causing this issue. If your controller won't power on at all, replace the controller batteries with fresh ones and make sure they're inserted correctly into the controller.
How do you fix a PS4 controller that won't charge?
PS4 Controller Won't Charge – 10 Easy FixesReset the Controller.Re-pair the Controller.Power Cycle the Console.Reset and Update.Change the USB Port.Change the Cable.Charge the Controller Upside Down.Change the Batteries.More items...•
How long does a PS4 controller last?
Typically, the DualShock 4 lasts for four to eight hours of play per charge (typically on the lower end of that range), far less than the Xbox One controller or the Nintendo Switch Pro controller. Why does the DualShock 4 battery die so quickly?
Why is my PS4 controller not turning on or charging?
The easiest way to do this is by pressing the reset button on the bottom near the L2 button. Alternatively, you can power off the PlayStation 4, then press the controller reset button. After that, plug in the USB cable (the controller to the console), then turn the PS4 on.
How do I fix my drift controller?
Apply isopropyl alcohol to a cotton swab. Pry back the thumbstick, and carefully wipe the rounded surface with alcohol. Rotate the thumbstick incrementally, carefully cleaning the entire thing. Check to make sure that you've fully cleaned the thumbstick, and test operation.
How do I stop my controller from drifting?
The best way to prevent stick drift is to make sure the controller isn't passively exposed to stuff that might be floating in the air. Put it inside a clean cupboard to that it's basically living in a quarantine zone from The Last Of Us. While inarguably tempting, snack time should not coincide with game time, either.
How do you connect your PS4 controller back to your PS4 after connecting it to your phone?
2:144:03How to Connect PS4 Controller Back to PS4 After iOS Device - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we'll just hit that button to turn it on. And then with your micro usb end plug that into yourMoreSo we'll just hit that button to turn it on. And then with your micro usb end plug that into your controller. And you'll see that it'll come on saying that it's charging.
How do I connect my PS4 controller to my PS4 without the cord?
How To Connect PS4 Controller Without A Cable. Head to your PS4 Dashboard, and go to Settings, Devices, Bluetooth Devices. You can do this via the PS4 remote or another PS4 controller. Once that's done, you should see the PS4 pad show up in the Bluetooth Devices screen, after which you should select it.
How to reboot PS4 controller?
If your controller is working enough to access menus, hold the PS Button to open the Quick Menu, then go to Power > Restart PS4 to reboot your system. In case your controller isn't cooperating, press and hold the Power button on your PS4 console until you hear two beeps.
How to force PS4 controller to connect to USB?
To force your PS4 to connect controllers over USB, head to Settings > Devices > Controllers > Communication Method and choose Use USB Cable. This will prevent the DualShock 4 from using Bluetooth, even when connected via USB.
How long is the warranty on a PS4 controller?
Like most hardware, DualShock 4 controllers have a one-year warranty. If you bought your PS4 controller within the last year and can't fix it with all the above tips, you should visit PlayStation's Fix & Replace page to put in a request for repair on your controller.
How to get PS4 to stop deleting memory?
Head to Settings > Devices > Bluetooth Devices and select the DualShock 4 entry —it's the one that does not have a green light next to it. On the resulting menu , press the Options button on your controller and choose Forget Device. This will cause your PS4 to remove it from memory so you have to re-pair it again.
How to check battery life of PS4 controller?
To check your controller battery life, hold the PS Button to bring up the Quick Menu on the left side of the screen. You'll see a controller icon with battery display at the bottom. Plug your controller into your PS4 and visit the Quick Menu again to make sure you see the battery charging animation.
How many controllers can you have on PS4?
Your PS4 will remember it until you pair the controller with another device in the future. Keep in mind that the maximum number of DualShock 4 controllers you can have connected to the PS4 at once is four. If you already have four controllers connected, you'll need to disconnect one to make room for more.
Why does my PS4 controller remember my device?
For instance, if you pair your PS4 controller with your PC or a friend's console, it will remember that device going forward.
What to do if PS4 controller is not working?
What to do if your PS4 controller trackpad is not working. Turn off your controller and back on again. Make a 50/50 measured solution of isopropyl rubbing alcohol and water. Use a microfiber cloth to slightly dampen with the solution. Source: Android Central. Use the microfiber cloth to clean your trackpad.
Why can't my PS4 controller hold a charge?
This is because batteries tend to degrade over time, and some of them degrade so harshly that they can fail to hold a charge for more than an hour.
How to connect PS4 controller to DualShock 4?
First, try plugging your DualShock 4 into the PS4 using your USB cable. Source: Android Central. Press and hold the PlayStation button on the center of your controller. This will prompt the controller to resync. If your DualShock still isn't connecting to your PS4, try these steps instead. Turn off your PlayStation 4.
What to do if your USB cable feels loose?
If your USB cable feels loose or otherwise not secure, you will need to replace either the USB cable or the DualShock itself.
How to clean a controller?
Use a microfiber cloth to slightly dampen with the solution. Use the microfiber cloth towel to wipe around the exterior of the buttons. Do not press too hard so you can avoid squeezing the solution off of the cloth and into your controller. Allow the controller to dry entirely before attempting to turn it on again.
How to clean trackpads?
Use the microfiber cloth to clean your trackpad.
Why won't my controller turn on?
If your controller is dying too fast -- or worse yet, it simply won't turn on -- it could be due to a bad battery. Replacing it is pretty easy, thankfully. All you'll need to do is buy a replacement battery, a pair of tweezers, and then follow the instructions below.
How to clean a PS4 controller?
Clean your PS4 controller. Gently wipe around the crevices of the analog stick with a dry microfiber cloth. To get rid of grime, use a cotton swab dipped in a mixture of water and isopropyl alcohol. If you see dirt that you can't reach, you can use pressurized air to dislodge it.
Why does my PS4 controller drift?
Causes of PS4 Controller Drift. If your character or the camera keeps moving when you're not touching the controller , the problem's source is likely analog stick drift. PS4 controller drift can be due to one of two things: The analog stick is dirty . The analog stick or the potentiometer is damaged.
What happens if you clean a controller?
The analog stick or the potentiometer is damaged. You can expect general wear-and-tear from frequent use. If cleaning the controller doesn't fix the problem, you should look into getting your controller replaced or repaired before disassembling it.
Can you disconnect a PS4 controller?
When taking apart your PS4 controller, be very careful not to disconnect anything other than the motherboard's battery.
Can you open a PS4 controller if the warranty is expired?
Removing the outer casing will void the warranty on your PS4 controller, so open it up only if the warranty has expired.
How to replace battery in PS4 controller?
To replace a PS4 controller battery, you have to disassemble the controller. Check for a loose USB connection. With a USB cable plugged into your controller, gently prod the connector. If it feels loose, or it comes out easily, then there may be a problem with the socket or the cable connector.
What to do if PS4 controller doesn't work?
If that doesn't work, or you don't have a second controller, then try a hard reset.
What Causes a PS4 Controller to Not Connect?
Sync issues represent the most common reason that PS4 controllers fail to connect. The controller may become desynced on its own, or someone may have synced it with a different console or device. In some cases, a firmware issue with the controller may even prevent it from syncing up correctly.
Why is my PS4 controller not syncing?
Remove sources of Bluetooth interference. If your controller turns on, but you aren't able to sync it using either the wired or wireless method, or if it quickly loses connection, then you may have too much interference between your PS4 and your controller.
How to fix a PS4 controller that won't connect?
How to Fix a PS4 Controller That Won’t Connect. To figure out why your controller isn't working correctly, and get it connected to your PS4 so you can start playing again, perform each of the following steps in order. Use a USB cable . Your goal is probably to play wirelessly, but the first step is to make sure that your controller actually works. ...
Why won't my controller connect to my computer?
In addition to sync issues, you may have a USB cable or battery issue. You need a USB cable that's capable of both data and power transfer to perform the sync process, and problems with worn out cables and damaged USB ports can also prevent your controller from connecting.
Can you charge a PS4 controller with a USB cable?
Make sure the battery works. If the controller doesn't power on, then try charging it. If it still doesn't power on, even when plugged into the PS4, then suspect the battery.
Summary
It’s annoying to encounter the PS4 controller drift issue. How to fix PS4 controller drift? This post from MiniTool gives solutions to you and also introduces the reasons for the PS4 controller drift issue. Now, keep on your reading.
Solution 1: Reset Your PS4 Controller
How to fix stick drift PS4? You can reset your PS4 controller. Here is how to do that:
Solution 2: Clean Your PS4 Controller
How to fix PS4 controller drift? Use a dry microfiber cloth to gently wipe the gap of the analog rocker. To remove dirt, use a cotton swab dipped in a mixture of water and isopropyl alcohol. If you see unreachable dirt, you can use compressed air to remove it.
Solution 3: Contact Sony
If your controller is relatively new, it may still be under warranty. Go to the PlayStation Repair and Replacement page, select DualShock 4, and follow the prompts to see if you are eligible for free repair or replacement.
Solution 4: Disassemble the PS4 controller to Clean the Analog Stick
To perform a deep cleaning of the controller input, you must remove the casing and lift the battery to access the motherboard. Use a cotton swab and a mixture of water and isopropyl alcohol. Do not use pressurized air on internal components.
Solution 5: Replace the PS4 Analog Stick
If you want, you can try to replace the analog joystick and potentiometer (the sensor of the analog joystick). In addition to the parts that can be purchased online, you will also need a soldering iron. Unless you want to do it yourself, buying a new controller is a cheaper and simpler solution.
How to fix headphones on DualShock 4?
If you have headphones plugged into the 3.5mm headphone jack on the DUALSHOCK 4 wireless controller and you hear no audio, or the audio from the headphones is very faint, make sure the headphone plug is pushed all the way in. Unplug and then firmly reinsert the headphones.
How to turn off the vibration on DualShock 4?
To turn it back on: Go to Settings > Devices > Controllers > Enable Vibration.
Can you remove the controller cable and use the controller wirelessly?
Once the controller light turns on, you can remove the cable and use the controller wirelessly.
Can you use a DualShock 4 controller on a PS4?
You can use your DUALSHOCK 4 wireless controller away from your PS4. Find out more about compatible devices, applications, and feature support:
