How to Repair Pre-Lit Christmas Tree Bulbs
- Tools and Materials Needed:
- Locate the Bad Bulb. Locating the bulb that is not working on your pre-lit Christmas tree is easy. ...
- Using the Tester. Pre-lit Christmas trees come with a light tester. Place the bad bulb inside the tester. ...
- Removing Bad Bulb. Unplug the lights. ...
- Install New Bulb. Line up the grooves on the new bulb and the socket. ...
How to put up a Christmas tree really fast?
- Insert the Christmas tree (still in its twine and Christmas tree bag) into the Christmas tree stand and secure according to the instructions for your stand.
- Once the Christmas tree is secure, remove the Christmas tree bag, and add about 1 1/2 to 2 cups of water to the tree stand. ...
- Once the tree appears to have settled, remove the twine. ...
How many lights should I put on my Christmas tree?
The right amount tends to be 150 lights per strand, but you can buy Christmas lights with more lights per strand—so 200 lights per strand would work best if you want a very bright tree, while you'd want to opt for 100 lights per strand if you wanted a less twinkly look.
How to light your Christmas tree like a pro?
How to Hang Christmas Tree Lights Outdoors
- If you use floodlights to show off outdoor evergreens, use white, blue, or green lamps. ...
- Don't try to hang strings of Christmas lights from the eaves with cup hooks—in a strong wind, the wires may swing loose. ...
- Be sure you have outdoor electrical sockets to plug into when you use outdoor Christmas lights. ...
What to do when pre lit tree lights go out?
- Plug the lights into an electrical outlet.
- Turn the light switch and the circuit breaker on.
- Check the fuse or fuses from the plug at the end of the light strand (usually the glass-cylinder type with a wire filament).
- If the fuse isn't the problem, there's a problem with a bulb.
How to find a Christmas tree bulb that is not working?
How to remove a bad light bulb?
About this website
What do you do when the lights go out on a prelit tree?
This often occurs through rough handling or improper storage of a tree. Look to find the loose bulb, check the wires to ensure they are properly aligned, and secure the bulb tightly within the socket. This should fix the issue. If a short has occurred, the light string is usually not repairable.
How do you tell which light is out on a Christmas tree?
You can tell which bulb is out on your string of traditional Christmas lights by looking for the bulb that is “burned out” by looking at the tiny little filaments in the light bulbs to see which bulb is “burned out” or has lost it's filament. Many times the bulb will be “smoked” as well.
Can you replace lights on Prelit tree?
Burnt-out bulbs can cause overheating. While the remaining bulbs on the prelit tree will light, replace burnt-out bulbs as soon as possible with the replacement bulbs that came with the tree or a compatible bulb with the same type of connector.
Can you restring a pre lit Christmas tree?
0:453:20How to Restring Lights on a Pre-lit Christmas Tree - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the master bulb so that's where we're going to start I noticed that this master bulb is attachedMoreAnd the master bulb so that's where we're going to start I noticed that this master bulb is attached to this tip with a zip tie. So I'm going to come in with my scissors. And clip the zip ties.
How long do prelit Christmas trees last?
Another benefit of artificial Christmas trees is that you can use them for years. Warner said most artificial trees last an average of 10 years, while some can be used for 20 years or more. Because of this, it's important to think about what kind of Christmas tree you want in the long run while you're shopping.
What to do when half a string of lights is out?
If half a strand is working and the other half is not, you probably have a loose or broken bulb. Start with the first unlit bulb and work your way down, wiggling them to check for looseness. If it flickers, that's your cue to replace it.
How can you tell if a Christmas light fuse is blown?
The fuse is a small, glass cylinder with metal-plated ends and an internal metal filament. You can sometimes tell by sight if a fuse has blown; the metal filament inside the glass cylinder will have a break in it.
How do you find a burnt out light on a prelit Christmas tree?
0:476:50How to fix pre-lit Christmas trees - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe two common ways that. This happens that a pre-lit tree would go out like this is. Either from aMoreThe two common ways that. This happens that a pre-lit tree would go out like this is. Either from a bad shunt or a wire. Coming loose in a socket somewhere those are the two most.
How can I fix my Christmas tree lights without a tester?
Try running your hands along the lights, and if they flicker on or off at one point, start testing the bulbs in the area you were just touching. If they don't, you'll just have to start at one end and work your way down. Pull out one bulb at a time, and stick a piece of folded up foil into the bulb socket.
Are prelit Christmas trees worth it?
Improved efficiency and safety. With the advent of cooler, more energy-efficient LED (versus incandescent) lighting, along with the fact that artificial trees don't dry out or present a subsequent fire hazard, pre-lit Christmas trees can offer a nice balance between convenience, safety, and energy efficiency.
How do you find a burnt out light on a prelit Christmas tree?
0:476:50How to fix pre-lit Christmas trees - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe two common ways that. This happens that a pre-lit tree would go out like this is. Either from aMoreThe two common ways that. This happens that a pre-lit tree would go out like this is. Either from a bad shunt or a wire. Coming loose in a socket somewhere those are the two most.
Why are some of my lights not working?
It's a problem if you have a sudden loss of power in the house—such as the lights going out—and the circuit breaker for those appliances and outlets hasn't tripped. The most common solution for losing the lights is a tripped breaker, and in most cases resetting the breaker is all you need to do.
How can you tell the difference between light bulbs?
More lumens equal brighter light; fewer lumens equal dimmer light. Standard 100-watt bulbs produce about 1600 lumens. Watts: The amount of energy a light bulb uses. The lower the light bulb wattage, the lower the electric bill.
How do I know if my strings are LED?
Take a second look at the color. LED lights have a different look than traditional lights especially in the colors (red, green, blue) and pure, bright white. LED lights have a more “electric” look.
How to find a Christmas tree bulb that is not working?
When you find it, check that strand of lights to make sure other bulbs are working properly. This step will allow you to see other bulbs that are not working on other strands.
How to remove a bad light bulb?
Unplug the lights. To remove the bad bulb, simply pinch the grooves on the side of the socket and pull the bulb upwards. Do not pull too hard as this could damage the socket and even break the bulb. When done correctly, the bulb should slide right out.
How many lights do I need to light a Christmas tree?
Assemble the tree sections and plug in each male to the corresponding female jack. I ended up using exactly 1000 lights to get this result. However, the number of lights will depend on your tree size and your personal taste.
How to hide wires on a tree?
As you work your way along the branches, separate the needles so that the wires can be wrapped right up against the metal branch. This will help to hide the wires. Then when you reach the outer tips, just intertwine the lights loosely and to your liking. This will also be beneficial if you ever decide to flock your tree.
How many branches does a 12x5 tree have?
The bottom of the top section had 12 branches. That makes 12 x 5 = 30 + 40 more for the top tips. In other words, the top section gets a strand of 100. From there, I increased the bulbs per branch as I moved down the sections. (as the branches get longer, it will take more lights). This is how I worked out the lights on my tree. (click any image to enlarge).
Where to start a female tree stand?
When starting each section make sure that you begin with the female end on the top branches of the section and keep the male end on the bottom branches of the sections. That way you will finish with the plug (male) at the bottom of the tree. Doing this makes it easy to connect your 1st stand to an outlet and leaves a female hook-up at the top of each section.
How to check if a tree bulb is loose?
If only one section of the tree is dark and you've checked the connections, take time to look at every bulb to make sure none are loose or missing. Check inside the box for any extra bulbs rattling around in the bottom and push down on each bulb to make sure it's solidly in its socket. If all the bulbs are intact, in place on the tree and not loose in the socket, then unplug the tree again.
How to replace a broken light bulb?
Most manufacturers use simple push-in bulbs. Put on gloves, release the hook or latch on the side of the bulb and then pull the bulb out of its socket without twisting it. Grasp the new bulb gently, push it straight into the socket and lock it down with the hook or latch.
What to do if you removed a bulb and attached an animated ornament?
If you removed a bulb and attached an animated ornament or other device in its place, try removing the item and replacing the bulb. This may solve the problem without any need for further troubleshooting.
Why are my Christmas lights not working at Costco?
If you find your Lowe's or Costco Christmas tree lights not working, check the manufacture r's instructions carefully before boxing up the tree for a return. Most prelit trees have fuses inside the electrical plugs. Double-check that the tree is unplugged from the wall and then check each plug and connector for a blown fuse .
How to troubleshoot a prelit Christmas tree?
Most troubleshooting in trees centers around light strings that have gone dark, or the initial assembly of the new tree. Methods in troubleshooting include testing the light strings in an effort to find the faulty bulb, or simply replacing the existing light strings with working sets. Below you will find the most common problems and solutions associated with light strings on prelit Christmas trees.
Why do lights go on and off in a tree?
If lights go on and off as the tree and branches are moved around, this is not always an indication that there is a short in the wire. Most likely a bulb is loose, and the connection is getting lost as the bulb moves in its socket. This often occurs through rough handling or improper storage of a tree. Look to find the loose bulb, check the wires to ensure they are properly aligned, and secure the bulb tightly within the socket. This should fix the issue.
How to fix a plug that is burnt out?
Check the plug fuses. Slide open the door of the plug and replace any fuses that look burnt out . Then plug the strand into an extension cord to see if this fixes the problem. Need help? Watch this video on replacing fuses!
What happens if a mini light bulb is pulled out of socket?
If one of the wires is misaligned, or if a bulb is pulled out from its socket, the current is broken and the light strand will go out.
How many plugs does a tree need?
Many times the main plug that goes to the outlet is not in the lowest section of the tree, which can seem confusing. Larger trees often have 2 or 3 plug s that go into the wall, so look for these if the tree does not light completely. Each of these plugs will also have a fuse, so check to make sure they do not need to be replaced if a section of the tree is not lighting.
Why is my tree not turning on?
If the tree has multiple light plugs stacked together, the most common reason for a section not turning on or flickering is often as simple as one of these plugs coming loose. Check that all plugs are secure. If your tree is a power pole or one plug design, check each section where the poles meet to ensure that there is nothing obstructing the connection and that they are seated properly .
Does a broken bulb affect the rest of the strand?
As long as current is flowing through each bulb the strand will remain lit. A broken bulb will not affect the rest of the strand, unless the shunt is broken in the process. If the shunt is broken when a bulb breaks, or if it is dislodged due to a loose bulb, the flow of electricity will stop.
Make Life Beautiful
English Gardens: Metro Detroit’s choice for garden plants, flowers, gardening supplies, patio furniture and garden accessories, fresh-cut flowers, floral arrangements, landscape design and installation. Seasonal Christmas Stores are open from October to mid-January with the area’s best selection of Christmas trees, lights and decorations.
Join Our Team
English Gardens is built around people who love people and plants. We provide only the best value and finest quality products and services to beautify your garden, home and holidays. We are committed to creating a family atmosphere that’s a fun and rewarding place to shop, work and do business.
How to find a Christmas tree bulb that is not working?
When you find it, check that strand of lights to make sure other bulbs are working properly. This step will allow you to see other bulbs that are not working on other strands.
How to remove a bad light bulb?
Unplug the lights. To remove the bad bulb, simply pinch the grooves on the side of the socket and pull the bulb upwards. Do not pull too hard as this could damage the socket and even break the bulb. When done correctly, the bulb should slide right out.
