Follow these Steps to repair a patio heater
- Before attempting any repairs, make sure the Patio heater is turned off and disconnected from the power source.
- Check that the fuse or circuit breaker is not blown and replace the fuse or reset the circuit breaker if it is blown.
- Remove the cover of the patio heater and check the pilot light. If it’s out, relight it...
Full Answer
Why is my propane heater not working?
- *IMPORTANT* Turn off propane and clear lines. ...
- Find out the model number of your furnace so you can view its specific manual (typically online) and see the manufacturer's sequence of operations for how it should function. ...
- Take apart the heater so you can see inside.
Are propane heaters better than electric heaters?
Propane heating is better than electric heat in many ways. Performance, efficiency, dependability and reducing the carbon footprint of your home are all ways propane heat is superior to electric heat. Not all heating systems deliver air at the same temperature.
How do you Purge a propane heater?
Restarting Furnace After Running Out of Propane – Step-By-Step Process
- Fill the tank. Bleeding the tank without first refilling the tank is zero work. ...
- Hit the reset button. This step will help you determine whether you need to bleed the heater in the first place. ...
- Turn off the heater. ...
- Gather the necessary tools. ...
- Find the bleeder valve. ...
- Attach the nylon tubing. ...
- Turn ON the furnace and loosen the bleed valve. ...
How do you clean a propane heater?
- Turn off power/gas to the furnace. Turn off power to the furnace at the breaker box.
- Clean furnace surfaces. Wipe exterior surfaces with a damp rag.
- Remove the blower.
- Carefully clean the blower.
- Clean the pilot or hot surface igniter.
- Clean the flame sensor.
- Inspect the drive belt.
- Lubricate (but not too much).
What happens when you stack a patio heater?
Why is my patio heater low pressure?
How to fix a thermocouple that is too far from the pilot light?
What is a thermocouple on a patio heater?
How to unclog a gas line?
Why won't my electric heater start?
How to replace spark igniter?
See 4 more
About this website
How do you fix a propane outdoor heater?
0:0013:16How To: Repair a Propane Patio Heater - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the first thing we're going to do is take the finial off the top. Here. Not just unscrews by handMoreSo the first thing we're going to do is take the finial off the top. Here. Not just unscrews by hand and then you've got this little. Little doohicker thing up top decorative.
Why do patio heaters stop working?
Check to make sure the propane tank has enough fuel in it. If not then refill or replace it. Another potential cause for a low flame is that the gas hose is kinked. Check the gas hose and straighten it.
How do you fix a propane heater that won't stay lit?
If the thermocouple is too far from the flame, this can cause the pilot to go out and shut down the propane heater; you can fix this easily by moving the thermocouple closer to the flame. The thermocouple could also be worn out, in which case it needs to be replaced.
How do you fix a patio heater that won't stay lit?
Lift the protective flame screen off the heater, unscrew the nut and pull out the thermocouple. With a water hose, rinse the inside of the thermocouple tube, let it air-dry, then reconnect it. With a clean thermocouple, gas can travel to the flame easier and the heater will stay lit.
How do you clean a thermocouple on a propane heater?
4:065:35How to clean Thermocouple in propane heater-How to ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipRegion and this is what you need to clean it with just some steel wool. And just come right alongMoreRegion and this is what you need to clean it with just some steel wool. And just come right along the thermocoupler. Be gentle any soot any carbon that's built up on there.
How do you clean a thermocouple on a gas heater?
In cleaning a thermocouple, you need some steel wool or 60-grit sandpaper, and a cloth. First, turn off the gas supply, unscrew the thermocouple and then clean it with steel wool or sandpaper then wipe down with a cloth to remove residue. I clean our thermocouple every six months to avoid getting it coated with soot.
Can you manually light a patio heater?
Ensure there are no leaks and the heater is in good repair. For automatic ignition systems, hold the control knob in and use a lighter to ignite the flame. For non-automatic systems, turn the control knob to the lowest setting and use a lighter to ignite the flame.
Can I bypass a thermocouple?
Realistically, you have just disabled the thermocouple, but you can also reach in and unclip it from its holding bracket where it meets the pilot light. In most cases it will be held on with a gravity clip, but some are held on with a screw that must be removed with a small screwdriver.
What does thermocouple look like?
The thermocouple is made up of a tube, a bracket, and wires. The tube sits above the bracket, a nut holds the bracket and wires in place, and underneath the bracket, you will see the copper lead wires that connect to the gas valve on the furnace.
How do you clean a thermocouple on a patio heater?
5:598:02Patio Heater Pilot Light Won't Stay Lit - DIY Thermocouple CleaningYouTubeStart of suggested clipEnd of suggested clipYou know steel wool or sandpaper or things that i haven't used that much you'll find other littleMoreYou know steel wool or sandpaper or things that i haven't used that much you'll find other little things to to need to to use this so don't be wasteful just to hang on to that and save your money.
How do you fix a thermocouple?
0:102:36No Hot Water - How to Replace a Thermocouple - YouTubeYouTubeStart of suggested clipEnd of suggested clipAlso once we get the burner assembly. Out we can then remove the thermocouple by just applying someMoreAlso once we get the burner assembly. Out we can then remove the thermocouple by just applying some pressure there's a fitting that holds. It inside the bracket.
Where is the thermocouple on a patio heater?
The thermocouple of a gas patio heater is a safety component designed to prevent gas leaks when the pilot goes out. It's a copper rod that sits next to the pilot tube on the other side of the spark igniter; it allows gas to flow through the pilot tube when it detects heat from the pilot light.
How do you clean the jets on a patio heater?
If your patio heater has these issues, cleaning it could be all you need to do. To clean the burner or heating elements, remove the emitter screen to expose the burner or element. Because these should be kept dry, use compressed air to blow off dust and dirt instead of a damp cloth. Reattach the screen.
How do you purge air from a patio heater?
1:416:53Propane Patio Heater Troubleshooting - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo if idle lights not working your heater will not start other heaters this particular brand ofMoreSo if idle lights not working your heater will not start other heaters this particular brand of heater. You. Turn it to your pilot position now when the heater is new you have a lot of hair in the
How do you maintain a patio heater?
Maintenance of Your Patio HeaterRegularly check the hoses for damage. ... Check for leaks in the joints of the hose and cylinder.Check the air holes and vents for blockage. ... Keep the heater covered when not in use to prevent it from gathering dust.Store the heater in a dry place.More items...•
How do you bypass a thermocouple on a patio heater?
0:214:14Bypass thermocoupler on an outdoor patio heater - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we're going to bypass thermocoupler by removing the spring valve inside of it. So we're gonnaMoreSo we're going to bypass thermocoupler by removing the spring valve inside of it. So we're gonna start by undoing yeah let's move the sparkler thing out of the way that doesn't work anymore.
Patio Heater Repair & Troubleshooting: The Ultimate Guide
Your pilot light is used so you can tell if the gas is flowing into your patio heater. You should typically be able to see your pilot light from the front of your heater, and if you can’t, then there is probably an issue.
How to solve some common problems of Patio heaters - Cool-Off
Whether you need some extra heat on those spring evenings or just wanted to have it as a style statement, patio heaters are a useful addition to your yards or outdoor areas.
What happens when you stack a patio heater?
When these elements stack up on a patio heater’s gas or electric heating element, the heater may have starting issues or reduced heat production. If your patio heater has these issues, cleaning it could be all you need to do.
Why is my patio heater low pressure?
Low gas pressure is usually caused by broken, kinked or otherwise damaged gas lines.
How to fix a thermocouple that is too far from the pilot light?
After locating the thermocouple, use pliers to gently squeeze the thermocouple and pilot tube closer together. Reattach the screen.
What is a thermocouple on a patio heater?
The thermocouple of a gas patio heater is a safety component designed to prevent gas leaks when the pilot goes out. It’s a copper rod that sits next to the pilot tube on the other side of the spark igniter; it allows gas to flow through the pilot tube when it detects heat from the pilot light.
How to unclog a gas line?
To unclog the line, start by removing the emitter screen with a screwdriver to expose the ignition assembly. Grab a small wrench and loosen the orifice from the gas line.
Why won't my electric heater start?
Electric heater doesn’t start, or starts but doesn’t work right. Damaged or corroded wiring is one of the most common causes for electric patio heater problems. This includes everything from the heater not starting at all to a whole host of malfunctions while it’s running.
How to replace spark igniter?
To replace the spark igniter, note that it is usually secured to the ignition assembly by a single retainer nut that can be removed with a wrench. On the other end, it’s usually linked to the ignition switch wiring with a push-in connector that can be easily pulled out by hand.
How to tell if gas is flowing into patio heater?
Your pilot light is used so you can tell if the gas is flowing into your patio heater. You should typically be able to see your pilot light from the front of your heater, and if you can’t, then there is probably an issue.
Why is my patio heater not working?
Your patio heater relies on a flame for the heat source. If you notice the flame is smaller than usual or the heat coming from the unit has reduced, then there is probably a malfunction relating to the gas pressure that you’ll need to deal with.
Why does my electric patio heater stop working?
An electric patio heater may stop working because of a faulty heater within it. This is usually caused by faulty wiring or damaged wires caused by overuse. The bad news is that this wiring is complicated to fix yourself, and you’ll probably need to consult a professional to have this one resolved.
Why is the thermocouple on my heater?
Thus, it prevents gas from flowing into your heater unnecessarily and causing potential harm to you and your family. The thermocouple is also attached to your tilt switch so that if your heater tips over, the gas will stop flowing.
Why won't my patio heater start?
This is a pretty obvious one, but if your patio heater won’t start at all, there’s probably a malfunction. This can be caused by a damaged igniter, or if there’s an issue with the supply of fuel. We’ll come to the solution later in this article.
What happens if the pilot light goes out?
Your thermocouple is designed as a safety component that controls the flow of gas. If your pilot light goes out, the thermocouple will stop the gas supply, so it doesn’t just flow out.
How to replace thermocouple on a car?
The easiest thing to do is lift off the front panel and replace the thermocouple using a wrench. This is simple enough to do from home.
Why is my propane heater freezing up?
Your propane tank may freeze up in any kind of weather. If you notice that your patio heater is freezing up, then you need to be sure that the tank is level. If this problem persists, you will need to get a new propane tank. If your pilot won’t light then that could mean that the tank may be malfunctioning or has a leak.
Why won't my pilot light on my heater?
If your pilot won’t light then that could mean that the tank may be malfunctioning or has a leak. The pilot could also be clogged. Be sure that the cylinder valve isn’t completely closed. You will need to open it if it is, but be sure that it is not fully opened. Attempt to light your heater manually.
Why is my pilot assembly loose?
Bugs or spiders often get into the pilot assembly and cause this problem. Check the connection in between your pilot assembly and the gas valve, these could be loose. If they are, be sure and do leak checks after you have tightened them. Cleaning the pilot assembly is sometimes the easiest and quickest fix.
Can you use a propane heater on an outdoor patio?
Having a propane patio heater ensures that you are able to enjoy your outdoor patio year round. However, like anything, they may give you some issues from time to time. Normally these are easily fixed and you will not have to purchase any parts or materials to get them back in working order.
Can a propane patio heater be used for barbecues?
With these tips, your propane patio heater should endure many barbecues. This means you and your guests will be warm and enjoying the deck all year!
What to do if gas heater won't light up?
If there is a spark but the heater will not light up, try using a lighter or burning spill to light the gas. If you still can’t get it to light, verify the following parts are in working order so you can be sure the gas is making it to the burner.
What to do if your heater is not light?
If you have carried out all the checks and the heater will still not light, you can repeat all the checks more slowly and carefully or take your heater to a specialist for a service. Any other modifications that do not involve ignition issues on your individual heater will vary according to the manufacturer.
How to tell if thermocouple is broken?
A good indication that the thermocouple has broken down is that the pilot light goes out when you try to turn the heater on.
What is the flip switch on a patio heater?
Some regulators have a flip switch that prevents the valve in the top of the cylinder from being depressed, effectively acting as an "off" switch. If you find such a switch on your patio heater, make sure that it’s set to the "on" position. Clear Gas Pipe.
Why does my gas heater not work?
As with other gas appliances, one obvious reason they fail to work is that there’s no gas. Look toward the base of the heater and take out the gas cylinder. If it’s light in weight, it may be empty, and you should replace it with a full one.
Why do gas heaters have bug screens?
Most gas patio heaters have a bug screen to keep away insects that are attracted to the flame. If your heater’s insect guard becomes too obstructed, it can block the flow of air and smother your flame. Remove the screen and clean it either by blowing on it or with a quick wash and thorough drying.
What is the regulator on a gas burner?
Check the Gas Regulator. The gas regulator is a connector that joins the gas tank with the gas pipe to be carried up to the burner.
What happens when you stack a patio heater?
When these elements stack up on a patio heater’s gas or electric heating element, the heater may have starting issues or reduced heat production. If your patio heater has these issues, cleaning it could be all you need to do.
Why is my patio heater low pressure?
Low gas pressure is usually caused by broken, kinked or otherwise damaged gas lines.
How to fix a thermocouple that is too far from the pilot light?
After locating the thermocouple, use pliers to gently squeeze the thermocouple and pilot tube closer together. Reattach the screen.
What is a thermocouple on a patio heater?
The thermocouple of a gas patio heater is a safety component designed to prevent gas leaks when the pilot goes out. It’s a copper rod that sits next to the pilot tube on the other side of the spark igniter; it allows gas to flow through the pilot tube when it detects heat from the pilot light.
How to unclog a gas line?
To unclog the line, start by removing the emitter screen with a screwdriver to expose the ignition assembly. Grab a small wrench and loosen the orifice from the gas line.
Why won't my electric heater start?
Electric heater doesn’t start, or starts but doesn’t work right. Damaged or corroded wiring is one of the most common causes for electric patio heater problems. This includes everything from the heater not starting at all to a whole host of malfunctions while it’s running.
How to replace spark igniter?
To replace the spark igniter, note that it is usually secured to the ignition assembly by a single retainer nut that can be removed with a wrench. On the other end, it’s usually linked to the ignition switch wiring with a push-in connector that can be easily pulled out by hand.