how to repair a samsung tv remote

Here is the easiest way to fix your Samsung smart TV remote:

• Remove the batteries from your remote
• Unplug the TV from the wall
• Wait 60 seconds
• Plug the TV back in
• Wait till the TV comes back on
• Put the batteries back in the remote, see if it worked

Full Answer

How to reset Samsung TV remote?

Reset instructions for Samsung TV based on model year

• 2019 – Current. To reset your 2019-current Samsung TV to its factory settings, press the Home button on your remote then go to Settings > General > Reset.
• 2016 – 2018. To reset your 2016-2018 Samsung TV to its factory settings, press the Home button on your remote then go to Settings > Support > Self Diagnosis > ...
• Past – 2015. ...

Why does my Samsung remote not work?

• Reset your TV and remote
• Replace old remote batteries with new ones
• Re-pair your remote with your TV
• Make sure the remote’s IR sensor works
• Remove possible IR sensor obstructions
• Update your TV’s software to the latest version
• Reset your router/modem
• Calibrate your remote’s touch pad

How do you reset Samsung remote control?

Test the Remote

• Turn on the digital camera or activate the camera feature on your cell phone.
• Point the remote control at the camera, and then press and hold the Power button (or channel, volume, buttons) on the remote control.
• While continuing to hold the button down look at the camera screen. ...

How to reset to factory settings in Samsung TV?

• Restart the TV by holding the power button down for 5 seconds. ...
• Update your TV’s software to the latest version by going to Settings > Support > Software Update.
• Delete the app that isn’t working and then reinstall it. ...
• Reset your Samsung Smart Hub by going to Settings > Support > (Device Care) Self Diagnosis > Reset Smart Hub. ...

See more

How do I fix my Samsung TV remote?

1 Remove the batteries from your remote control. To eliminate the possibility that the remote is sending commands to the TV, take the batteries out.2 Unplug the TV. ... 3 Clean the touch controls. ... 4 Plug the TV back in. ... 5 Replace the batteries in the remote control.

How do I pair my Samsung Smart TV remote?

On most Samsung TVs, the remote control sensor is located on the lower right hand side of the TV. If not, it is directly in the bottom center. Next, press and hold the Return and Play/Pause buttons simultaneously for at least 3 seconds. Your TV will begin syncing with the Smart Remote.

Why did my Samsung TV remote stop working?

However, the most common reasons for a TV remote that is not working are battery issues, paring issues, or infrared sensor issues. Press the power button while pointing the remote control at your TV. Make sure the LED indicator on the TV blinks. If not, your remote does not have enough power remaining in the batteries.

How do you reset a Samsung remote?

0:000:59Samsung Smart TV: How to Pair, Unpair, & Reset Remote ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipHere's a samsung smart tv i'm going to show you how to reset or pair your remote. Okay now yourMoreHere's a samsung smart tv i'm going to show you how to reset or pair your remote. Okay now your remote should look similar to this right here just fi this tv here is the samsung au 8000 model with the

How do I reset my TV remote?

For Android TVs released in 2015 or later, symptoms may improve by updating the software of the remote control....Reset the remote control.Open the battery compartment cover and remove the batteries.Press and hold the Power button for three seconds.Insert the batteries again and close the battery compartment cover.

How do I pair my remote to my TV?

Open the Settings screen. How to access Settings. If the remote control has a Quick Settings button: ... The next steps will depend on your TV menu options: Select Remotes & Accessories — Remote control — Activate the MIC button or Connect via Bluetooth. ... Follow the on-screen instructions. Notes:

How do I fix an unresponsive remote?

Section B: Checking items of the remote control (common)Make sure none of the remote buttons are jammed.Reset the remote. ... Clean the remote control terminals. ... Replace with fresh batteries. ... Perform a power reset on the TV. ... For Android TV/Google TV: symptoms may improve by updating the software of the remote control.More items...•

Why is my TV not responding to the remote?

Perform a power reset. If the issue is caused by an external factor, such as network service, data broadcasting, or connected devices, it may be improved by a power reset. For Android TV™ or Google TV™ models, unplug the power cord, wait two minutes, and then plug it in.

Why is the remote control not working?

A remote control that will not respond or control your TV usually means low batteries. Make sure you are pointing the remote at the TV. There also may be something interfering with the signal such as other electronics, certain types of lighting, or something blocking the TV remote sensor.

Why won't my Samsung remote connect to my TV?

If your Samsung remote is not working, remove your remote's batteries, unplug your TV and wait 60 full seconds. While you wait, press and hold the power button down on your remote. Finally, plug your TV back in and replace your remote batteries. Your remote should work now!

How do I pair my Samsung bn59 remote?

Push and hold the PROG button on your Adapter's remote until the LED on the remote illuminates, then press the INFO button. The remote's LED will slowly blink to indicate that it is currently in pairing mode. With the keys on your remote, enter the three-digit number that appears on your TV screen.

Why is my Samsung remote not working?

The Samsung remote is not working. Troubleshooting your remote depends on the issue that you're having with it. If it seems like it's pressing buttons by itself, it may actually be that your remote's buttons are dirty. And if it won't work when you try to use it on your TV, there's a quick check you can perform to figure out if it's your remote ...

What to do if your remote won't work?

If it is the remote, it may need a pair of fresh batteries or a reset.

1. Reset your Samsung TV and remote

First, open up the back of your remote and remove the batteries. Then go ahead and unplug your TV from the wall and wait 60 seconds.

2. Replace weak or dead remote batteries

The life of batteries can depend on a wide range of factors including brand, operating temperature, and damage.

3. Re-pair your remote to the TV

Over time, your remote can become unpaired with your TV. Pairing is the term for your remote and TV being linked together, so your TV knows which remote to respond to.

Samsung Remote Keeps Saying Not Available

When you try to connect your remote to your TV, you will go through the process of pairing, which was mentioned earlier, and once this is done, you should visit the successful pair. If you connect your remote control properly But you have to face the message that the remote is not available.

Samsung TV Remote Power Button Not Working

Just as important as the ability to change channels on your Samsung TV is the ability to turn your Samsung TV on and off. This allows users to be able to control their TV from where they are sitting or standing. But it is also a must-have, for any Affiliate, promoting any program.

Samsung TV Remote Sensor Not Working

The sensor on the remote of your Samsung TV is a connecting piece with the ability of your remote to control your TV. If this sensor does not work, there is no way you can control your TV from this device. When the sensor suddenly stops working, it is a frustrating thing.

Samsung TV Remote Pointer Not Working

It can be very frustrating when you watch your favorite movie or show but notice that the pointer on your remote control is not working. A no pointer on a remote is one that relays a signal from your remote directly to your TV, so it works properly for the remote to work at its full potential.

What If Your Remote Is Blinking Red Light?

When your Samsung TV remote doesn’t work and starts flashing red, you can try to fix it in many ways.

Check The Batteries of Samsung TV Remote

Don’t get frustrated when your remote control stops working. Before you start looking for a replacement, check the batteries in your Samsung remote control.

Ensure that Remote Control Sensor is Unobstructed

If you’re having trouble with your Samsung TV turning on, try moving the device and the remote to different areas in the room. If moving them around doesn’t solve the problem, you may have an obstruction between the remote control sensor on your TV and its remote (the IR receiver).

Ensure That Remote is paired

The new “smart” remote control can sometimes be a bit finicky. Sometimes it works, and other times it won’t — and we can’t really figure out why. If you’re having trouble pairing the remote to the TV, make sure your TV is on and working, then try re-pairing the remote again after waiting a few minutes.

Reduce Distance between Remote and TV Sensor

Samsung remote controls have their limitations — the maximum distance at which they can be used is 30 feet (10m), which may not be far enough for some people.

Remove Any Devices that can cause Interference

Samsung TVs are likely to run into interference with other remotes. Due to the technological limitations of infrared (IR) remote controls, your Samsung TV remote control may not function at times.

Disable Bluetooth

If you’re pairing your remote via Bluetooth, ensure that you turn it off and then turn on the Bluetooth. Ensure there is no obstruction between your TV and remote. Walls, electromagnetic devices, and other electronics can interfere with the infrared signal.

Perform a Hard Reset of the Remote

o reset your remote control, you need to remove the batteries from the device and unplug the power cord from the outlet for 60 seconds. First, locate the batteries and then locate the remote’s battery area. Remove both batteries from your remote and insert them back into the remote after 60 seconds.

What to do if your TV remote doesn't work?

If one of the buttons on your TV remote doesn’t work, and you want to avoid the high cost of a replacement remote, fix it yourself . Most remotes have electrically conductive paint on the bottom of each rubber button. The more you use each button, the more the paint wears off.

How to clean a remote control that is sticky?

If you’ve spilled anything sticky on your remote, dunk the rubber buttons/sheet, plastic case and any hard plastic buttons in a bowl of warm water and dishwashing liquid. Brush off the debris, rinse all the parts with warm water and let them dry.

How to separate rubber buttons?

To separate the halves, press a butter knife along the seam and look for “give.”. Press in at those points and pry the halves apart. Inside you’ll find either individual rubber buttons, or a single molded sheet containing all the buttons.

Can you fix a TV remote yourself?

Most fixes are easy . . . if you can get the remote apart. Most of the time you can fix your TV remote yourself with a simple repair kit and avoid the high cost of a replacement.

How to use Samsung smart TV remote?

Here's some of the ways you can use your phone as a remote: The Samsung SmartThings app lets you control your TV no matter where you are. Connect your phone to your TV, and then navigate to the Smart Things app. Select your TV from the list of available devices. From there, you can use the remote control features.

What happens if you lose your TV remote?

If you've set this up and given permission before, or you still have your remote, it's a breeze. But if you've lost your remote, when your TV asks permission for your phone to connect you can use the controls on your TV to give it. (See your user manual for instructions.)

Does Samsung TV have universal remote?

Most universal remotes will work with your Samsung TV. Visit Amazon to check out available universal remotes. Make sure the remote says it is compatible with Samsung before you buy it.