If you need to repair a shorted keypad on your GE microwave, you will need to follow these steps:
- Unplug the microwave.
- Unscrew the screws that are holding the top vent grill on top of the microwave.
- Unscrew the screws holding the control panel cover to the right.
- Unplug the ribbon cable (this is what controls the keypad).
How do you fix a shorted keypad on a GE microwave?
If you need to repair a shorted keypad on your GE microwave, you will need to follow these steps: Unplug the microwave. Unscrew the screws that are holding the top vent grill on top of the microwave. Unscrew the screws holding the control panel cover to the right.
How do you fix a microwave that won't turn on?
1 Wipe Down Your Microwave. If you have not cleaned it in a while, your microwave keypads can get dirty. ... 2 Reset Your Microwave. There are times where the microwave will glitch out and be unresponsive. ... 3 The Issue Likely Lies With the Control Panel or TouchPad. ...
Why is my microwave oven membrane keyboard not working?
There are three main reasons for a microwave oven membrane keypad malfunction: Break of the conductive tracks of the membrane keyboard. Loss of contact at the point of connection between the loop and the connector on the control board. 3. Sticking contacts of the touch panel (membrane keyboard).
What is the touchpad on a microwave?
Then there is the touchpad, which is the component that sends your button presses to the control panel. We say “button presses” because while it may seem like it, microwave keypads are generally not touch screens, but rather each number/label has a membrane switch underneath it.
How do I fix my GE microwave keypad?
2:494:28GE microwave range service key pad shorted - YouTubeYouTubeStart of suggested clipEnd of suggested clipInside or clean it take it off clean it and then pop it back and push this ribbon here make sureMoreInside or clean it take it off clean it and then pop it back and push this ribbon here make sure it's not like damaged. And sometimes that helps are you gonna have to replace.
How do you reset a GE microwave keypad?
Locate the "Clear/Off" button on the front of the microwave. Hold it down for 3 to 5 seconds until the "LOC" error on the display disappears, or the timer or cooking time on the display resets.
How do you reset a microwave keypad?
Press and hold the START/ENTER key again for approximately 4 seconds. The L indicator or lock icon should disappear from the display. If the controls are still not responding, attempt a reset on the microwave by unplugging the unit for 2-3 minutes. Plug the microwave back in and attempt the use the microwave again.
How do you fix a microwave control board?
1:394:06GE Microwave Main Control Board Replacement #WB56X20629YouTubeStart of suggested clipEnd of suggested clipWith the screws removed lift out the old board install the new main control board by positioning itMoreWith the screws removed lift out the old board install the new main control board by positioning it in the housing. Thread the screws to secure.
How do you do a hard reset on a microwave?
KEY TAKEAWAYS:Microwaves can stop responding due to software glitches or unintended microwave settings.Press the cancel/reset button to do a soft reset on your microwave.If necessary, perform a hard reset by unplugging your microwave for 30 minutes, then plug it back in.
How do I unlock my GE microwave keypad?
0:070:59Microwave Control Lock Explained - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou simply hold the X again for three seconds.MoreYou simply hold the X again for three seconds.
How do I fix my oven keypad?
1:583:41Stove Buttons Not Working - How to Fix Range Keypad Using an EraserYouTubeStart of suggested clipEnd of suggested clipSimply take your pencil eraser. And rub each little contact point on the end of the cable. Flip. ItMoreSimply take your pencil eraser. And rub each little contact point on the end of the cable. Flip. It over and then repeat the process on the other side.
What do you do when your microwave buttons don't work?
0:061:26Top Reasons Microwave Buttons Not Working - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd control panel try pressing each of the control panel buttons. If some of the buttons respondMoreAnd control panel try pressing each of the control panel buttons. If some of the buttons respond correctly while others don't the panel and touchpad should be replaced.
Why has my touchpad stopped working on my microwave?
Another possible cause of microwave buttons not working could be an issue with the membrane switch. The membrane switch is more commonly known as the touchpad and has a few soft touch electrical switches. There is a certain conductive coating on the touchpad which can go defective with repeated usage.
Can you fix a microwave touchpad?
There are no moving parts on touch pads, so replacing them is easy if you can get the touchpad off. If you can't figure out how to remove it, have the microwave serviced.
How do you open a microwave keypad?
0:304:34GE Microwave Control Panel Replacement, Repair #WB56X20761YouTubeStart of suggested clipEnd of suggested clipUse a Phillips head screwdriver to unthread the two mounting screws securing the grill with theMoreUse a Phillips head screwdriver to unthread the two mounting screws securing the grill with the screws unthreaded open the oven door then slide the grill to the left and lift it up to remove.
How do you fix a microwave front panel?
1:003:34Microwave Panel Not Working. Cost to fix? $0.00 - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou'll have one on each side. Once you do that go ahead and remove the vent cover that'll. Just pullMoreYou'll have one on each side. Once you do that go ahead and remove the vent cover that'll. Just pull right out remove the panel you're going to have to open your microwave door.
Why does my GE microwave keep beeping?
GE microwave ovens have a built-in feature that produces a "beep" each time a button is pressed. This audio feature is meant to alert you that a button has been pressed on the appliance. Many GE microwaves allow you to change the volume of the "beep" and even turn it off at any time.
How do you fix the F3 code on a GE microwave?
Step 1 – Reset your microwave. ... Step 2 – Turn the power off. ... Step 3 – Remove the grille. ... Step 4 – Remove the control panel. ... Step 5 – Remove the membranes from the control board. ... Step 6 – Replace the membranes. ... Step 7 – Reattach the control board. ... Step 8 – Test your microwave.More items...
What does F3 mean on a GE microwave?
An F3 error code indicates that the keypad for the control panel is bad or has a short. This will cause the microwave to beep continuously after the set clock message appears.
How do I reset the filter button on my GE microwave?
0:000:33Resetting the Filter Light On a GE Microwave - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you actually just hold this button for three seconds like so hold for three seconds. Until itMoreSo you actually just hold this button for three seconds like so hold for three seconds. Until it beeps.
Diagnose the Issue
A defective microwave keypad is usually the result of wear and tear over time causing the microwave’s controls to lose their sensitivity, which can be remedied by replacing the keypad. Alternatively, the keypad may not be working because of a fault with the microwave’s main control board.
Defective Control Board
Following the input signals that the microwave’s control board receives from the keypad, the control board then sends signals to the other components of the microwave. When the control board fails to act on the commands from the keypad, it suggests that the control board is defective.
Safety Warning
The high-voltage capacitor inside the microwave can store a lethal amount of electricity, even after the microwave has been disconnected from the power for several months. To safely access internal electrical components, the capacitor must be discharged.
Remove the Control Panel and Keypad
On most microwaves, the keypad is part of the front control panel, and therefore the entire panel will need to be removed and replaced if the keypad is defective.
3. How to fix sticky microwave oven membrane?
Over time, the "touch" buttons of the membrane keyboard presses through and fail. In order for the buttons to be pressed again and not to stick, we need to raise the pressed film of the buttons. We can do it by increasing the distance between the contact planes.
Reasons for microwave oven membrane keypad malfunction
The reason for the disgrace is that over time (especially in high humidity conditions). The insulation between the keyboard conductors deteriorates. It is impossible to diagnose this malfunction using a millimeter.
How to fix a microwave oven membrane keypad?
For repair, you need to glue the keyboard. In this technological process, sharp movements and shaking hands are common. The mechanical force on the upper film comes evenly and not too hard. Then remove the electronic unit.
There are no microwave generation possible reasons
Defective output power control relay (relay 2 in U furnaces) of the control unit. We should check it and, if necessary, replaced.
How to fix a shorted keypad on a microwave?
If you need to repair a shorted keypad on your GE microwave, you will need to follow these steps: Unplug the microwave. Unscrew the screws that are holding the top vent grill on top of the microwave. Unscrew the screws holding the control panel cover to the right. Unplug the ribbon cable (this is what controls the keypad).
What to do if microwave is not responding?
If your GE microwave is not responding to your touch inputs, what can you do to resolve the issue? If your GE microwave is not responding to your touch inputs, wipe the keypad down with a disinfecting wipe to remove dust, debris, and any other gunk.
Why do microwaves have button presses?
We say “button presses” because while it may seem like it, microwave keypads are generally not touch screens , but rather each number/label has a membrane switch underneath it. Naturally, if the touchpad is stuck or defective, there is no way to tell the control panel what you want the microwave to do.
Why is my microwave not responding to my touchpad?
If your GE microwave’s keypads are not responding to your touch inputs, there are two likely reasons why this is happening. The touchpad is faulty, which will require a replacement that costs at least $10. If none of the buttons are working or notice that the display is strange, the control panel could be faulty.
Why is my microwave not working?
If your GE microwave’s display is not working, the most likely reason is a defective control board, typically caused by either a faulty capacitor or a missing solder. If you have prior experience with soldering, you can attempt to solder a broken line with a soldering iron.
How to tell if microwave is worth fixing?
To determine if your microwave is worth fixing or not, you will need to assess how old it is, how much you initially paid for it, and how much it will cost to repair the issue you are having. If your microwave is old and/or the repairs are close enough to a new microwave cost, it is best to simply buy a new one.
What is wrong with my microwave?
If something is wrong with this component, your microwave can get thrown out of whack and start not functioning properly.
