
How to fix a leaky shower faucet single handle
- Cutting off the water supply. The very first thing that needed to be done, is cutting off the water supply. ...
- Look for the screw and unscrew it. After cutting off the water-supply open the faucet to relieve water pressure, if any. ...
- Repair or replace cartridge. ...
- Replace O-Rings. ...
How to replace a single lever shower faucet?
Remove the Faucet Handle
- Turn the faucet handle upside down to reveal a hex screw that connects it to the rest of the faucet.
- Use an Allen wrench to loosen and remove the screw.
- Pull out the handle as you wiggle it at the same time.
How do you replace a single handle shower valve?
- New shower valve
- Soldering torch
- Jigsaw
- Pipe fittings
- Conversion plate
- 4-in-1 screwdriver
- Slip-joint pliers
How to repair a leaky tub and shower faucet?
- Clear any rust, wax or caulk from around the base.
- Use an adjustable wrench to loosen the bolts that hold it together. ...
- Remove the stem and install a new one in the fitting using new bolts. ...
- If the bathtub faucet is still dripping after replacing the handle, washer and stem, you may need to replace the entire bathtub spout.
How do you replace a shower faucet?
How to replace or install a shower faucet?
- Single handle faucet. In single-handle faucets, the valve cartridge is the main root of problems. ...
- Two-handle shower faucet. In the double handle faucet, stems are the main controllers of water. ...
- Multifunctional three handle faucet

How do you replace a single handle shower cartridge?
2:516:30How to Replace a Delta Faucet Shower Cartridge - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a strap wrench or a pair of channellock pliers to loosen the bonnet nut by turning itMoreUse a strap wrench or a pair of channellock pliers to loosen the bonnet nut by turning it counterclockwise then remove the bonnet nut by hand.
How do I stop my single handle shower faucet from dripping?
Gather Tools and Materials. ... Turn Off the Water Supply and Open the Faucet. ... Remove the Handle Cap, Handle and Faceplate. ... Remove the Locking Clip. ... Remove and Replace the Cartridge. ... Replace Other Parts and Test. ... Remove the Metal Stem in a Shower Faucet with Two Handles. ... Replace the Metal Stem if Needed.More items...
How do you remove a single lever shower handle?
1:558:22Fix leaky shower head with a stuck handle - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then you can remove. This body and then you can remove the nut that's holding the cartridge toMoreAnd then you can remove. This body and then you can remove the nut that's holding the cartridge to the valve. And then you can do the seeds.
How do I fix a single handle faucet?
0:182:44Repairing a Leaky Single Handle Ball-Type Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst you will need to turn off the hot and cold water supply valve under the sink next. You willMoreFirst you will need to turn off the hot and cold water supply valve under the sink next. You will need to remove the single lever handle. This may require using an Allen wrench to loosen the handle.
Why does my shower head drip hours after I turn it off?
More often than not, a dripping showerhead is the result of worn or damaged inner seals. The rubber washers or O-rings in your shower act as a seal between your showerhead and shower hose, preventing water from leaking out. Over time, these wear down, and when they do, water starts to leak out.
How do I know what shower cartridge I have?
1:323:16Who Made Your Shower Faucet? Tips to Find the Brand and ManufacturerYouTubeStart of suggested clipEnd of suggested clipOnce those screws are out you should be able to just pull this plate. Off and then you can lookMoreOnce those screws are out you should be able to just pull this plate. Off and then you can look behind the plate to see if there's a sticker in here that has the manufacturer.
How do you replace a one lever shower valve?
0:171:42Shower Repair : How Do I Replace a Single Control Shower Faucet?YouTubeStart of suggested clipEnd of suggested clipIn this faucet now first off remove your handle. Remove any sketches that may be in place. And thisMoreIn this faucet now first off remove your handle. Remove any sketches that may be in place. And this particular one has a small little keeper or a horseshoe-shaped pin.
How does a single handle shower valve work?
Single-Handle Valves Most single-handle showers allow the cold water access when the valve is first opened, with hot water being added to the cold as the valve is opened further. Continuing to turn the handle will open the valve even more, allowing you to add more hot water to the mix and make the shower water warmer.
How do you fix a shower lever?
0:143:21Repair Leaking Tub Spout Diverter Pull in Shower Mode - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd pulling up on the diverter. Knob once that comes off all of the parts will come loose. So we'llMoreAnd pulling up on the diverter. Knob once that comes off all of the parts will come loose. So we'll take a look inside the tub spout in a little bit but first let's check out the washer.
How do I know if my faucet cartridge is bad?
Signs that a cartridge faucet needs repair are water dripping from the spout, difficulty in adjusting the water temperature, hot water entering cold water outlets like toilet supply lines and inadequately heated water at some faucets.
Why does my faucet drip after I turn it off?
If you notice your bathroom sink drips or leaks out of the faucet head when turned off, there is likely an issue with the seal inside the faucet head, allowing the water to run through or drip. Before calling a professional plumber, consider whether you're able to repair the leak in your bathroom sink yourself.
Why does my shower keep dripping?
When water drips or drizzles from a shower head, there is a problem with the shower faucet (valve). In most cases, inner seals are worn, or parts have become corroded or clogged with hard water deposits. And the rubber O-rings and gaskets that seal connections between moving metal parts wear down with time and use.
How do you stop a shower head from dripping?
How to Fix a ShowerheadStep 1: Turn Off Water. Shut off the water main to the whole house. ... Step 2: Remove and Inspect. ... Step 3: Clean the Showerhead. ... Step 4: Tape It Up. ... Step 5: Reattach the Showerhead. ... Step 6: Turn On the Water. ... Step 1: Cut Off Water. ... Step 2: Take the Faucet Apart.More items...
Why do shower faucets have single handles?
Single-handle shower faucets are becoming more common in homes because of their simplicity, durability and the fact that they prevent scalds more effectively than faucets with two handles. A wide range of these types of faucets are on the market. A loose shower handle will usually occur well before ...
What is the function of a shower faucet?
The two most common shower faucet types use either an internal ball mechanism to mix and direct the water or an internal cartridge to mix and direct the water. In both cases, the diverter mechanism is what the shower handle is attached to.
What happens if the teeth on the shower diverter valve are broken?
If the teeth are worn or broken, then the ball/cartridge diverter valve must be replaced.
Why does my faucet leak?
When the faucet leaks, it may be due to a worn plastic valve stem or a loose valve handle, although other problems may cause leaks as well. Both types of faucets are relatively easy to fix. Following a few simple steps may save you the expense of hiring a plumber.
Why does my shower faucet drip when shut off?
When a shower faucet starts to leak or drip even when shut off, it may be cracked or broken. It may be time to replace it. When purchasing the shower faucet replacement, keep in mind that you need the exact same measurements in order for it to fit into the valve. Also consider the kind of shower faucet that you have currently installed.
Is a shower faucet a single lever?
If it only has one handle and functions to dispense both cold and hot water depending on how far you turn it, then it is a single lever shower faucet. There are many types of single lever faucets but regardless of their minor variances, they function the same way.
Disassembling a single-handle faucet
To get at a single-handle faucet valve, you usually need to remove the handle, then a retainer ring or clip of some sort.
Ball Faucets
If you have a ball faucet, a repair kit for your model will include springs and rubber seats, and perhaps a new ball as well.
Disk or Cartridge Faucets
A ceramic disk cartridge rarely wears out, but the rubber O-rings and gaskets do. Still, you may find that a repair kit includes the cartridge, just to make installation easier.

Cutting Off The Water Supply
Look For The Screw and Unscrew It
- After cutting off the water-supply open the faucet to relieve water pressure, if any. Now try to look for the screw that holds the handle with the shower faucet. The screw is mostly located behind or below the faucet lever. If the screw is covered by a cap, unscrew it using a screwdriver.
Repair Or Replace Cartridge
- Try to look for the cartridge, pulling the pin aids in removing the cartridge out. To prevent any damage to the base, take a rag and wrap it around the collar. The best practice is to pull a straight cartridge to protect against any damage. One more thing is to note the cartridge orientation so you may not face any difficulty while putting it back. If the faucet is too old and O-rings are fuse…
Replace O-Rings
- O-rings are the key factors that hold tight to stop any water leakage, check if the O-rings are damaged. Replace the damaged O-ring with a brand-new one, using a new O-ring will help to prevent water leakage. Conclusion Leaking can be occurred by damaged washers, O-rings, or sometimes due to minerals in the cartridge. Removing and cleaning the cartridge fixes the probl…