Repairing Guides

how to repair a small hole in a garden hose

by Everette Reilly Published 2 years ago Updated 2 years ago
image

  1. Disconnect the garden hose from the spigot. Drain the water from the hose completely.
  2. Clean the affected area of the garden hose with soap and water. Remove dirt and grime from a 4- to 5-inch section on each side of the pinhole.
  3. Poke the tip of a round wooden toothpick into the pinhole. Force the pick to a depth of about 1/8-inch.
  4. Trim the excess toothpick off with sharp scissors. Make your cut flush with the outer surface of the garden hose.
  5. Wrap the affected area of garden hose with electrical tape, beginning about 2 to 3 inches away from the pinhole.
  6. Make two or three turns of the tape directly on top of each other to finish off the spiral.
  7. Snip the tape with scissors.

How to repair a pinhole in a garden hose?

  • Grab a pen, a rag, and common electrical tape and head out to your garden hose
  • Turn on the spigot and closely examine your hose for tiny leaks, marking any leaks with a pen*
  • Turn off the spigot and disconnect your hose
  • Clean and dry any of the marked areas for repair

More items...

How to mend a garden hose?

Other Methods to Stop a Garden Hose from Leaking

  • Method 1 – Electrical Tape: I can totally understand how irritating those small holes are. ...
  • Method 2 – Hose Mender: Smaller holes can be taken care of with duct tape and electrical tape. However, the bigger holes need some attention.
  • Method 3 – Silicone Tape: If you don’t want to go ahead with a hose mender, silicone tape will do the trick for you. ...

How to increase water pressure in a garden hose?

Understanding the Basics

  • Pick a hose that is made up of vinyl or rubber
  • The length of the hose should match the area of your garden
  • Plies or layers add strength to hoses, so select the one with more layers or plies
  • Select a hose with a wider diameter to increase the water flow per minute

How to clean patio cushions without a garden hose?

  • Cover your outdoor furniture. There are many attractive and durable outdoor furniture covers that can help keep your patio furniture looking like new. ...
  • Clean up spills and stains promptly. ...
  • Treat your cushions with a fabric protectant. ...
  • Let them come in out of the rain. ...
  • Clean seam to seam. ...
  • Freshen up the look of your outdoor furniture. ...

image

How do I fix a small hole in my garden hose?

0:532:48How To Repair Fix Leak Hole Water Hose Easy Simple - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first thing that you want to do is locate the hole. The second thing you want to do is turn offMoreThe first thing that you want to do is locate the hole. The second thing you want to do is turn off the water the third. Thing you want to do is remove all the water from inside the water hose.

How do you repair a hole in a rubber hose?

Small LeaksOption 1 – Use common electrical tape or specially designed hose repair tape. First, clean and dry the hose before applying. ... Option 2 – Use rubber cement for tears and punctures. Dry and clean the area and apply rubber cement to and around the hole. ... Option 3 – Use a tire puncture repair kit.

Can you tape a hole in a hose?

Small Leaks Use common electrical tape in a pinch or specially designed hose repair tape to mend a small leak. Clean and dry the hose before applying. Overlap the tape as you wrap it around the hose. If you wrap it too tightly, the hose will crease and the tape won't seal.

Will Flex Seal tape work on a garden hose?

Flex Tape may not work with all hoses, and it is not recommended for applications with high water pressure (such as garden hoses and hoses in a car engine). If you have any questions, please do not hesitate to contact our customer service team at (833) 411-3539.

Will duct tape fix a garden hose?

Duct Tape for Hose Leak Duct tape might seem capable of fixing anything, and it's tempting to try to use it to fix a leaky garden hose. Duct tape isn't designed for watertight repairs, however, and even if it manages to stop the leak in the short term, the repair is unlikely to last.

Can you use plumbers tape on garden hose?

You are not supposed to put PTFE tape on garden hose connections, as the rubber gasket is what is supposed to provide the seal. When the connection leaks, it indicates that the gasket is worn (or the connection is not tight enough).

Can you patch a hose?

2:203:25How to REPAIR GARDEN HOSE in SECONDS - 3 EASY WAYS!YouTubeStart of suggested clipEnd of suggested clipBut the repair is just as easy start by cutting off the entire. End and then you'll want to go aheadMoreBut the repair is just as easy start by cutting off the entire. End and then you'll want to go ahead and get one of these repair kits. And the one i recommend.

Will duct tape stop water leak?

Can Duct Tape Stop A Water Leak? Tape can be wrapped around small leaks in a variety of ways. duct tape and electrical tape can be used if you need to. It is critical to cover the entire leak.

How do you repair a fabric garden hose?

0:566:50Expandable Hose (e.g. Pocket Hose) Repair Kit - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd i could actually probably repair the other end too. So the reason i stretched it out is to makeMoreAnd i could actually probably repair the other end too. So the reason i stretched it out is to make sure the inner tube and the outer sheath are at the correct length for where i cut it.

Will Gorilla tape Fix hose?

Who hasn't had the problem of a leaking garden hose? Joe shows you just how easy it can be to repair with Gorilla Tape.

How do you fix a leaky flexible garden hose?

The stretchiness of the latex material in an expandable hose makes most adhesive solutions impractical and temporary. Instead, you should excise the area of the tube with the leak and use permanent, barbed connectors to reattach the two pieces of hose together.

Will Flex Seal stop a hose leak?

Yes it does! Many users have had great success with using Flex Seal for a variety of uses. Whether you are using it to fix a leak, prepare for a storm or using it as a sealant, we know that you will be impressed with Flex Seal.

Can you repair a rubber hose?

2:143:25How to REPAIR GARDEN HOSE in SECONDS - 3 EASY WAYS!YouTubeStart of suggested clipEnd of suggested clipBut the repair is just as easy start by cutting off the entire. End and then you'll want to go aheadMoreBut the repair is just as easy start by cutting off the entire. End and then you'll want to go ahead and get one of these repair kits. And the one i recommend.

How do you seal a hole in rubber?

You can quickly fix torn rubber with a waterproof patch and seal tape or with a rubber repair kit that includes patches and rubber cement. The process is similar for both methods, but using a patch kit includes the additional step of brushing on the rubber cement before applying the patch.

How do you fix a flexible garden hose?

0:006:50Expandable Hose (e.g. Pocket Hose) Repair Kit - YouTubeYouTubeStart of suggested clipEnd of suggested clipWelcome in this video i'm going to take a look at repairing an expandable hose and this is a pocketMoreWelcome in this video i'm going to take a look at repairing an expandable hose and this is a pocket hose. And you see here it is ripped open so this is the inner it's like a surgical tubing.

How to replace a leaky hose?

Turn off the water, disconnect the leaky hose end, and use needle-nose pliers to pull out the existing gasket inside the coupling on that hose end. Use your fingers to push the new gasket inside the hose coupling. Generally, the thicker O-ring gaskets (e.g., Nelson O-ring, available on Amazon ), the more watertight the seal; flat gaskets don’t mold to the contours of the coupling quite as well. Reconnect the hose to a spigot or nozzle and turn on the water to ensure the coupling no longer leaks.

How to fix a hose that is torn?

Turn off the water, disconnect the hose, and remove the torn section with a hose cutter or garden shears. Attach the cut ends of the hose to the connectors of the hose mender, twisting the two collars on the mender clockwise to tighten. Reconnect the hose to the spigot or a nozzle and turn on the water to verify there are no leaks.

How to remove water from hose after watering?

Drain any remaining water in a hose after a watering session by spraying it out with a nozzle and then lifting and gently shaking the hose with the hose end facing down to remove any leftover water. Standing water can weather the gaskets inside the hose and reduce the integrity of their seal over time.

How to tighten a hose that is bent?

Turn off the water, disconnect the hose, and remove the entire bent coupling with a hose cutter. Push the exposed end of the hose into the connector of the coupling, and then twist the collar of the coupling clockwise to tighten it. Connect the hose to a spigot or nozzle and turn on the water to ensure the coupling doesn’t leak.

What happens if a hose coupling is bent?

A bent coupling loses the watertight seal between the hose and a spigot, nozzle, or sprinkler, causing a leak . Advertisement. Replacing a bent coupling with a new one that suits your needs will provide a permanent solution for the leak.

What is wrong with my garden hose?

One of the peskiest garden hose problems is a leak in the coupling: the metal or plastic fitting found on both ends of a hose used to connect the hose to the spigot, a nozzle, or a sprinkler. If you spot a steady drip coming from the hose couplings when you connect it to a source, the gasket may need to be replaced.

What is the best hose to replace a vinyl hose?

If you must replace your hose, choose one made of rubber instead of vinyl. Rubber hoses tend to be more resistant to temperature changes and are less likely to crack over time than vinyl equivalents.

How to repair a hose that is damaged?

Compression mender. Cut the Hose. Use a sharp pair of scissors, a hose cutter or a razor knife to cut out the damaged hose section. Be sure to make clean cuts, with no ragged edges. Install a Compression Mender. A compression mender gives a quick, yet secure, fix without any special tools.

How to tighten a water hose?

Slip the cut end of the hose into the compression coupling and twist the collar clockwise to tighten the seal and secure your water hose repair .

How to repair a water hose with a bent coupling?

A bent coupling will leak when connected to a faucet or sprinkler, while a crushed one cannot be connected at all. Use a compression coupling for a brand-new hose end.

How to fix a hose with compression mender?

A compression mender gives a quick, yet secure, fix without any special tools. Simply slip each cut end into the compression mender and twist the collar clockwise for a watertight seal. Inspect Your Work. Slowly turn the water on to make sure the hose repair seal is secure.

What to do if your faucet drips?

That drip, drip, drip from the faucet is a waste of water and money. If you recently noticed a drip coming from your hose, you’re probably looking for information on how to fix a garden hose leak. A worn-down washer may be the problem. Replace your old washer with Gilmour’s Flexogen Hose Seal for a water-tight seal.

What are the ends of a garden hose?

Make sure the edges are nice and clean. Choose the Fitting. The ends of your garden hose feature two different compression couplings: a female and a male. Female ends connect to the faucet, while male ends connect to your nozzles or sprinklers.

Can you replace washers on sprinklers?

You can use the same steps to replace worn washers and seals on sprinklers, nozzles and connectors.

Small Leaks

Use common electrical tape in a pinch or specially designed hose repair tape to mend a small leak. Clean and dry the hose before applying. Overlap the tape as you wrap it around the hose. If you wrap it too tightly, the hose will crease and the tape won't seal.

Leaking Spigot

A washer replacement is the simplest of all repairs and is often all that's needed. Washers dry or deteriorate with age. Simply remove the old one, and pop in a new washer. If it still leaks, replace the coupling.

Large Leaks

Replacing a hose end or repairing a center section is a little more involved but still a simple job. The repair requires cutting the damaged section out and replacing with a mender. When cutting away damaged parts, make straight cuts with a sharp blade.

Protecting Your Garden Hose

A good garden hose is a smart investment. If you take care of your hose, it will serve you well through many seasons of lawn and garden projects. Follow the steps below to prolong the life of your hose:

What to do if you have a pinhole in your garden hose?

If an undetected pinhole in the garden hose assaults you with a squirt in the eye when you turn the water on, try not to overreact . Your first impulse may be to hurl the offending tool onto the trash heap. While the retaliatory act might make you feel a little better, it won’t do much to support your budget. Grab some household items and take a few minutes to execute a basic troubleshoot. It will keep a few hard-earned bucks in your pocket and won’t eat up nearly as much time as a trek to the garden center for a new hose takes.

How to wrap a hose around a pinhole?

Make two turns of tape around the hose, one right on top of the other. Stretch the tape as you wrap the hose with a tight spiral to a point about 2 to 3 inches on the other side of the pinhole. Overlap the edges of the tape generously as you advance.

How to remove dirt from pinhole?

Remove dirt and grime from a 4- to 5-inch section on each side of the pinhole. Rinse well and dry the area thoroughly. Tape adheres best to clean, dry materials.

Why do you need a wood toothpick plug?

The wood toothpick plug prevents water from seeping out of the hole and under the tape. This maintains the integrity of the adhesive on the tape, ensuring longevity for your patch job. You’ll want to repair that garden hose pronto because it can quickly become a money pit as it continually wastes water.

How to make a hose fit a pinhole?

Cut a piece of inner tube a bit longer than the clamp, and wrap it around the hose over your circled pinhole. Fit the halves of the clamp around the inner tube, being careful to keep it smooth, rather than bunched up. Have the clamps directly over the hole. Fit the screws and tighten the clamp. Test the hose. You're done.

Do plastic hose clamps last longer than inserts?

Plastic hose repair clamps often last longer than the inserts. I hope you kept some clamps. Maybe you don't have as impressive a collection as I do, but you only need one for each repair. The other item you need is a piece of inner tube. Tools needed are a permanent marker to circle the pinhole before you lose sight of it, scissors to cut the inner tube, and a Phillips screwdriver for the clamp.

Step 1: The Tools and Materials

The stuff I used to fix this leak are as follows; A scissors. A flat blade screwdriver. A hose clamp. A roll of self adhering rubber tape (I used electrical grade tape but there is also rescue tape).

Step 2: Applying the Rubber Tape

I cut a length of the rubber tape and applied it firmly to the leak spot. I made sure to keep the rubber surface free of dirt for proper sealing onto itself.

Step 4: Completion

Now with my water pump on, there is no leak. All this done in 3 minutes or less!

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9