How to repair a soda vending machine
- Remove the front cover of the distribution valve and install the syrup drainage piece at the nozzle.
- Adjust the carbonated water flow to the desired ratio (e.g. 2.50 oz s) (70 g s). Adjust 1 4 turn at a time and then...
- Adjust the syrup regulator on the left of each valve to adjust the proportion of syrup water. Place the cup...
Full Answer
How to properly clean soda machine?
- Wash hands
- Unplug the ice maker; scrub the inside of the ice bin and chute with a nylon brush and the sanitizer solution
- Wash the condenser fins with a dedicated hard brush; clean the air filters, if they are used
- Check the water filters to make sure they are current
- Maintain the valve and syrup line product labels
How to make a soda machine into a gun safe?
Soda Machine Gun Safes: 5 Brands
- Pepsi: For reasons that I cannot explain, Pepsi seems to be the #1 brand for ballistics storage. ...
- Coca-Cola:
- Mountain Dew: A number of vending machine companies have noticed this secondary market for used vending machines. ...
- Seven Up:
- Dr. Pepper:
How to rob a soda machine?
So, what you do is you get yourself some common table salt, some water, and something to carry this all in (empty 2 liter bottle s) seem to work well mix a metric shit-ton of salt into the water. Now, find the machine you wish to rip off and somehow get that salt water into the coin slot.
How do you Hack a soda machine?
- clean your eye glasses at the mall or airport
- fill your tires with Nitrogen at a gas station
- charge up your phone or device
- massage chairs
- laundry machines
How do you fix a soda vending machine?
0:285:08How to Troubleshoot a DN5000 Soda Vending Machine that is ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipI've been told one of the things you can do to make this work better to spray it with food-gradeMoreI've been told one of the things you can do to make this work better to spray it with food-grade silicone spray it with food grade silicone.
Why is my vending machine not working?
You need to check if slots are empty or not. Machine will return the coins if items are not there to vend or there is a jam in there. If there are items in there, but coins are being returned you need to clear the jam. Take out all the cans or other products before placing them back.
How do you fix a vending machine that won't cool?
0:213:41Refrigeration Troubleshooting & Maintenance - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can find the air filter off to the lower right inside the machine an extra air filter isMoreYou can find the air filter off to the lower right inside the machine an extra air filter is provided in your machine also brush off the screen underneath.
Why is my soda gun not working?
If drinks are flat (no carbonation), check: If the carbonator is plugged in and the circuit breaker is working correctly. To see if the temperature is too warm. See “product too warm”. Replace tank if pressure is less than 400PSI.
Are vending machines easy to fix?
Instead of wasting time and money on professional repairs, there are some vending machine repair needs that you can do on your own. Many things that will go wrong with a vending machine can easily be rectified. Here are a few things you might want to look into or try before you call the pros.
How do you service a vending machine?
Follow these easy maintenance tips to ensure maximum uptime and profits:Use food-grade detergent, warm water and a soft towel to clean the entire vending machine two or three times a year.Wipe down and sanitize all visible surfaces of the vending machine every time it is serviced on its regular route.More items...
How do you test a vending machine compressor?
0:161:55How To Test Vending Machine Refrigeration System - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst thing you need to do is isolate the evaporator. So no air or wind is blowing across it. ThisMoreFirst thing you need to do is isolate the evaporator. So no air or wind is blowing across it. This is an insert that we use when we ship our compressors.
How do you prime a vending machine?
On beverage machines, in setting them up, make sure to “prime” each selection. Priming is defined as testing that selection out until a beverage is ready to be vended. You can do this manually by taking the vending motor cover off and pressing each motor switch, this will ignite the vend process.
Why do vending machines reject coins?
Counterfeit money Valid bills and coins have a specific weight that the vending machine looks for. Counterfeit money does not weigh the same as real money. In addition, the vending machine will reject money that was legitimately created but improperly minted. The vending machine will think the money is fake.
Why is my carbonator not working?
Unplug all beverage dispenser electrical cords from the outlet, ensure that if the carbonator has a power switch it is in the on position, then wait 15-20 seconds and plug the cords back in. Allow the carbonator motor to run until it stops.
How do you disassemble a soda gun?
1:052:54How to Clean a Bar Gun - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can immerse it into a pitcher or small container of club soda let it sit in there for a fewMoreYou can immerse it into a pitcher or small container of club soda let it sit in there for a few minutes it will loosen up any of the syrups that have stuck the nozzle on pull that right out of there.
How does a soda gun work?
Soda guns operate by the opening and closing of valves in a plastic housing which allows the user to mix both flat and carbonated water along with a variety of syrups at different mixture ratios.
Is your Soda Machine Not Dispensing Syrup?
To troubleshoot this problem, you have to check the syrup box. If it is empty, then replace it. Inspect syrup box connection also.
Air Noise Coming from System while Dispensing Soda?
If you attempt to pour a drink and get no result but hearing an air tone, it is due to an electrical problem. So, make sure your carbonator is plugged in.
Is Sound Coming from One of the Pumps?
It means your machine is hooked up with an empty box. If you do not have an empty box hooked up, try disconnect and again reconnect the box,
Carbonator Troubleshooting
Check whether that an electrical outlet is plugged into the carbonator or not. You have to shake or bump the carbonator softly if it is plugged in, which should cause it to turn on and off. If you do not hear it kick on, contact the service technician.
Soda Vending Machine Troubleshooting
When you are not careful like using the wrong size bottles and cans while loading the soda pop on your vending machine, the internal gate will not be closed properly. This will leads to burning out the motor so that you need to replace or repair that motor with the help of a technician.
Soda Fountain Leaking Water
If the water is leaking from your fountain machine, you need to turn off the water supply to the equipment.
Conclusion:-
Thanks for reading this blog on soda machine troubleshooting. Stay in touch with us to get more simple troubleshooting guides for your commercial kitchen equipment. Bookmark partsfps.com and order parts when you need them.
How to clean a coke machine?
You can achieve this by using a damp cloth or sponge and a good sized bucket. Just wipe the whole thing down top to bottom left to right. Then rinse and dry the machine. Remember not to use a hose to rinse the machine off.
How to make soda last longer?
Clean your Soda Machine to Make it Last Longer. If you want to have great long lasting soda machine, then cleaning is a priority. It may take a little time, but the effort that you put into it will outweigh the costs that may incur in the long run. These basic routine maintenance steps will keep you vending machine up and running for years to come.
What to do when you are done wiping a washing machine?
When you are done wiping all of these parts clean of any dust or debris it is suggested that you just take a dry cloth and dry them off.
Can soda be cleaned?
The electrical components of your soda machine can be cleaned or should I say dusted off with some compressed air . You can find this at any local computer or even hardware store. All you need to do is point the spray can and shoot away all that dust that will collect in your machine.
Can soda vending machines be damaged?
Most of your soda vending machines have a lexicon front that could be damaged beyond repair if cleaned with any abrasives such as steel wool, soft scrub, sandpaper or anything alike. This damage would be in the form of yellowing of the front of the machine by the removal of the protective coating that is used for these fronts.
What to do if a whole shelf is not working?
If a whole shelf is not working, swap shelves to see if the issue is in the actual shelf or in the control board. If your replacement shelf does work as well, you know the issue probably is in your control board. Like the beverage machine, always make sure your machine is level. You can adjust the legs.
How to keep lint out of refrigerator?
You can use air or even a brush to keep the lint out of the refrigeration unit area. On the glass front snack machines, make sure all the pricing for all the selections are correct. You should have a manual that generally has a few simple steps in setting the prices.
Why does my validator run continuously?
Any of this that covers one of the optics will cause the validator to run continuously because it thinks the machine is trying to accept a bill and will shut off after a set amount of time.
Do all glass front vending machines have a coin?
Some of these might be obvious, but necessary. Most all glass front snack and beverage machines have coin mechanisms, dollar bill validators, and some sort of control board in them. Always make sure your machines are plugged in and your machines have power. If not, check the outlet and circuit breaker for it have power.
Can you take the top part of a coin mech?
You can take the top part out of the coin mech and clean it as well. In setting up a machine, make sure you put plenty of coins in the coin mechanism so the machine will take dollar bills. Most locations use more dollar bills vs. coins so you might have to replenish the coins on a regular basis.
