Repairing Guides

how to repair a solar garden light

by Naomie Kutch IV Published 3 years ago Updated 2 years ago
image

Solar-powered garden lights repair can be a simple process. Start by opening up the old garden light and take out the battery pack. If you are reusing the plug end remove the battery pack and disconnect the plug end.

Full Answer

How to repair your solar garden lights easy and cheap?

  • Based on the model, there will be screws on the top or bottom of the case. ...
  • Inside the case will be the entire electronic arrangement. ...
  • Remove the glass casing on top and clean it with a cleaning fluid or a damp cloth. ...
  • Take out the battery from the battery case and clean out the case and battery. ...

What is the best solar landscape light?

Best Solar Landscape Lights: Illuminate Your Yard With Top 7 Highest-Rated Models

  1. URPOWER 2-in-1 Waterproof/Solar Spotlight – Fine rated Low Voltage Landscape Lighting. ...
  2. Upgraded SANSI LED Waterproof Solar Spotlight – Top Rated Solar Powered Landscape Lights. ...
  3. Aityvert Solar Torch Lights – Great Solar Garden Lights. ...
  4. Maggift 26 Inch Hanging Solar Lights – Good Solar Landscaping Lights. ...

More items...

Why are my solar lights not working?

Why Aren’t Your Solar Lights Working

  • Check If The Solar Light’s On. First things first, ensure that the solar lights are turned on, provided they come with a switch. ...
  • Replace The Batteries. ...
  • Cover The Solar Panel. ...
  • Dodging The Shadows. ...
  • Positioning The Solar Panel. ...
  • Check The Panel Angle. ...
  • Tackling Water Ingress Issues. ...
  • Dealing With Snapped Wiring. ...
  • Passive Infra-Red (PIR) Dials. ...
  • Lux Sensor Dial. ...

More items...

How do you clean outdoor solar lights?

  • If you clean your panels monthly, then this may be all you need to clean them.
  • Make sure to squeeze out the cloth or sponge before wiping the bulb. Water could damage the electronics if it drips into the panel.
  • Remember to always check the cleaning directions from the manufacturer of your lights. Different products may have different cleaning needs.

image

Can garden solar lights be repaired?

For extensive corrosion, you might not be able to fix outdoor solar lights that stop working. Instead, you'll need to replace them. If your solar lights are on a strand, much like fairy lights, check the wire to ensure it's still in good shape.

How do you fix a broken solar garden light?

3:076:48How to Fix Broken Solar Lights EASY! - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith an iron on high heat we go ahead and we try and repair this solder joint on the back of the PVMoreWith an iron on high heat we go ahead and we try and repair this solder joint on the back of the PV panel. You'll know if it works when the solder blob takes.

How do you make a solar light work again?

8 things to do if your solar powered lights aren't workingCheck that there's not a pull tab on the battery. ... Cover the panel to test the light. ... Ensure the solar panel is clean. ... Make sure the solar panel is positioned correctly. ... Test with regular batteries if possible. ... Switch off and leave to charge for 72 hours.More items...•

How do you fix solar lights that don't work?

Water Ingress/IntrusionMake sure your light is switched off.Open your solar light/solar panel and gently dry off all of the components – pay special to the sensor.Carefully re-assemble it.Place it in a dry, warm spot to dry off even further.Go ahead and manually test the light to see if it still works.

How long do outdoor solar lights last?

Generally speaking, the batteries in outdoor solar lights can be expected to last about 3-4 years before they will need to be replaced. The LEDs themselves can last ten years or more. You will know that it is time to change parts when the lights are unable to maintain charge to illuminate the area during the night.

Does clear nail polish work on solar lights?

Yes, you can put clear nail polish on solar lights. This is a quick and easy method to fix solar lights. You just need to apply only a small amount of clear nail polish evenly over the solar cells. Allow the nail polish to dry completely before using the light.

Why do garden solar lights stop working?

As solar lights depend on sunlight for their power, they will not work if they are not getting enough sunlight required for operation. Hence, make sure to check that your solar light is installed or placed in a location where it is getting enough sunlight for charging its battery so that it can work properly.

Can you put regular batteries in solar lights?

Solar lights can use regular alkaline batteries to supply temporary lighting when there is no sunlight but of course they are best charged using solar energy to provide longer lasting light at night time.

Can solar light batteries be replaced?

The short answer is that in most solar garden lights you can simply remove the battery cover, take out the old batteries which came fitted with the device, and replace the battery with a new rechargeable battery of the same specification.

Why did my LED lights suddenly stop working?

This problem has two possible causes. Either (A) You you have a 24V power supply connected to 12V LED strips. Or (B) there is a 'short' along the strip – in other words the solder has gone across the PCB somewhere and the +ve and -ve are touching, shorting the circuit.

How do you test a solar light battery?

An easy way to check a solar light LED with AA or AAA batteries fitted is to put an ordinary non-rechargeable battery in the light. Completely cover the panel or take it to a dark room, and if the LED or bulb is ok it will light up.

How do you test a solar garden light?

Do a test run by covering the solar panel. A major feature of solar lights is that they only come on at night. Therefore, if you're trying to test your lights during the day (to see whether they're working), you should cover the solar panel with either your hand or a piece of dark cloth.

Why do outdoor solar lights stop working?

As solar lights depend on sunlight for their power, they will not work if they are not getting enough sunlight required for operation. Hence, make sure to check that your solar light is installed or placed in a location where it is getting enough sunlight for charging its battery so that it can work properly.

What kind of batteries do you use for solar lights?

Which Types of Batteries Do Solar Lights Need? Solar lights don't need any special batteries to operate. They use one of two forms of batteries: NiCd (Nickel Cadmium) rechargeable battery or NiMH (Nickel Metal Hydride) rechargeable battery.

Where is the sensor on a solar light?

Where is the light sensor on a solar garden light? Answer: The light sensor is usually located under the led light panel, if not look for a small “eye” or covered area. On some models, the sensor is located on the solar panel.

How do you test a solar garden light?

Do a test run by covering the solar panel. A major feature of solar lights is that they only come on at night. Therefore, if you're trying to test your lights during the day (to see whether they're working), you should cover the solar panel with either your hand or a piece of dark cloth.

How to brighten a light?

To improve the brightness of your light, you will have to clean the casing. Just clean the see-through cover in hot water and washing up liquid and wipe around the casing. Remove any bugs too!#N#Next, check the circuit for damage. You should be able to work out something thats stopping the circuit from working. A good indication is rust or broken wires. Where possible, just try to replace the parts. If you haven't got spare wires or a soldering iron, just use wire cutters to strip wires and twist the ends back together. If the switch is broken, you can cut it out and twist the wires together. If the LED isn't very bright, you could consider taking it out and replacing it with a new similar LED of your choice if you know how to.

What happens if your solar panel doesn't work?

If your light hasn't been working for a while, then the solar panel will take a looong time to revive the dead batteries. This will just give the batteries a kick-start so that the solar panel will just top it up during the day. Ask Question.

What to do if your circuit stops working?

Where possible, just try to replace the parts. If you haven't got spare wires or a soldering iron, just use wire cutters to strip wires and twist the ends back together.

How to fix solar lights?

Procedure for Fixing Your Solar Lights. Step 1: Take Apart the Light Fitting. Using the instructions guide that came with your solar lights, unscrew the light fitting so that you can see inside the solar light. Step 2: Check for any Water in the Solar Light Fitting. Some solar lights are weatherproof, but not waterproof.

How long should I store solar lights?

Store the lights inside and away from moisture for 3 days or so in order to allow the lights to dry out. A dry solar light is a working solar light. After making sure that the solar lights are dry and the parts are working again, follow the instructions guide to re-assemble the solar lights.

How to tell if solar lights are bad?

One of the easiest ways to determine whether there is a problem with your solar lights is the amount of lighting that the solar lights are providing. Dim illumination: Solar lights with older batteries will have a lower illumination output, or an output that is not as bright as when the solar light was new.

Why are solar panels shadowed?

Shadowed Solar Panels. Shadows are notorious for creeping over solar lights and preventing them from charging. In addition, over the course of the summer plants may grow larger and begin to cover solar lights that had been uncovered at the start of the summer season.

Why can't I charge my solar lights?

This could be because of multiple cloudy days, shorter days at the earlier parts of spring, or on colder days where the batteries are less efficient at storing energy. These can easily be fixed.

Why won't my solar lights turn on at night?

Solar lights that are exposed to artificial light at nighttime will not turn on because they rely on low-levels of light to determine whether it is nighttime or not. Moving solar lights to darker areas is usually better.

What is solar lighting?

Solar lights generally are reliable products that provide nighttime illumination for various outdoor spaces. They can be used to illuminate the edges of a garden, provide lighting to walkways and help to illuminate walls to avoid accidents. However, they sometimes have problems.

What is wrong with solar light?

There are some visual results that you can use to know exactly what’s wrong with the light, things like: The light is placed in a spot where there isn’t enough sunlight. This will happen after changes in the seasons as the earth revolves.

How to tell if solar light is bad?

Now that we know what’s in a solar light, we can get to fixing it. There are some visual results that you can use to know exactly what’s wrong with the light, things like: 1 The light is placed in a spot where there isn’t enough sunlight. This will happen after changes in the seasons as the earth revolves. 2 The light turning ON after a few hours of sunlight, during the day. This means that the sensor doesn’t work properly and the light basically runs out of battery after, like an hour into the evening. This means your need to fix/replace the sensor, depending on how bad a state it’s in. 3 If the light is not ON during the day and still doesn’t come on in the night, there can be a problem with the sensor, the battery or the LED itself. 4 If the light flickers, there’s a problem with the wires or the LED.

Why is my solar light sensor not working?

There is one fix that you can do with the sensor that may help you decide. One reason for the sensor to not work is because there is dirt on it. Clean it up and see if it works. If there is no dirt, then check the coating on the sensor. Most solar lights come cheap and are made of cheap stuff.

How to clean a battery case?

The batteries will probably have a casing for themselves that you will need to unscrew. Remove the glass casing on top and clean it with a cleaning fluid or a damp cloth. If there’s a lot of dirt on the inside, you can rinse it under a sink. Take out the battery from the battery case and clean out the case and battery.

Why is the glass on top of the photovoltaic cell?

The glass on top is designed to let in all the sunlight for the photovoltaic cell to soak it in and for the LED to glow effectively in the dark. The photovoltaic cells may be inside the glass or on top of the case, depending on what model you choose.

Why does my LED light sensor turn opaque?

Another problem with the sensor is that if the transparent coating on it is not top grade, it will slowly turn opaque due to direct exposure to sunlight.

Why does my light turn on after a few hours?

The light turning ON after a few hours of sunlight, during the day. This means that the sensor doesn’t work properly and the light basically runs out of battery after, like an hour into the evening . This means your need to fix/replace the sensor, depending on how bad a state it’s in.

What to do if solar light doesn't work?

If you've cleaned and cleared up every obvious issue and the solar light still doesn't work, it may need new batteries. The batteries are usually tucked under the solar panel assemblage. Use a tiny screwdriver to open the compartment to check the workings inside. In some cases, there may be a single AA battery inside. Replace the battery with a fresh one of the same type.

How to clean solar panels after wiping them down?

If the plastic looks cloudy after wiping it down with a damp soft cloth, apply a coat of clear nail polish once the panel dries completely. This will help the panel receive light again, which should charge the solar light so it functions properly.

Why does my solar panel sit at an angle?

Animals or even freezing and thawing soil can also cause the light or its panel to sit at an angle instead of directly facing the sun. Reposition the light as needed to receive maximum light. While you're at it, use a soft cloth to wipe any dust and debris off the solar panel.

Where is the switch on a solar light?

The switch may be on the bottom of the light capsule or under the cap of a solar landscaping light. Turn the cap counterclockwise to loosen it from the clear plastic portion of the light to access the switch on some models.

Do solar lights have batteries?

These simple-to-install light s incorporate solar cells that turn sunlight into electricity to power the lights with batteries to store the energy. Unfortunately, solar lights have a few quirks that may make them less reliable as time goes on. The biggest issue is a dirty solar panel, but that's also fairly easy to fix. Advertisement.

Can Hunker fix solar lights?

Hunker may earn compensation through affiliate links in this story . You can fix your outdoor solar lights. Solar lights seem like a great idea when they're brand new, but sometimes you find yourself trying to fix outdoor solar lights that stop working.

Things You Will Need To For This Tutorial

Fixing basic or advanced solar lights is a matter of eliminating the most likely culprit. Once identified, you can repair solar lights like the pros. You should prepare the following tools to help you assess, diagnose, and troubleshoot the problems in your garden lighting system.

Steps On How To Fix Outdoor Solar Lights That Stop Working

Sometimes the only reason why an outdoor solar light stopped working is that its switch is not in the ON position.

Conclusion

I hope this tutorial on how to fix outdoor solar lights that stop working made you feel more confident about addressing such issues. The secret here is to explore and eliminate plausible explanations for the problem until you get to the root cause.

Why do solar lights not work?

There are many cases why solar lights fail to work, and one of them is because of a broken part of the wire. Don’t throw them away just yet. How to repair wires on solar lights is really easy with these few simple tricks. https://www.shutterstock.com/image-photo/device-concept-torn-wire-repair-broken-1552811522.

Why are my fairy lights loose?

A. Loose Wire Connections From Excessive Wire Tensions. If you have solar fairy lights or solar string lights wrapped around trees or ornaments in your garden, they are usually subject to a lot of pulling by external conditions. The wind might also heave these lights and damage the wiring.

What are the most popular solar lights in 2020?

Some of the most popular solar lights this 2020 are solar string lights, solar LED garden lights and solar street lights . Aside from being an ornamental part of your garden, house or street, these lights are green lighting alternatives to your old incandescent bulbs. However, solar lights do cost a little more than conventional lights.

Can you break copper wire?

Be careful not to break the copper strands of the wire as removing some strands would increase the resistance. This will cause the wire to heat up. If the fuse doesn’t blow, the wire would melt and cause a fire. To make sure your wiring connection is safe, you can cut the wire again and re-strip it.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9