how to repair a spincast reel

• Step 1: Turn counterclockwise while holding the handle to remove the front cover of the spincast reel; rotate until you...
• Step 2: Disassemble the back cover
• Step 3: Remove the nut or screw that holds the handle, then remove the handle from the spindle.
• Step 4: Continue removing the nuts and pulling the assembly that protects the reel spool.

Full Answer

What is the best spin casting reel?

Best Reel and Rod Combo: Zebco 202 Spincast Reel and Fishing Rod Combo . Zebco 202 Spincast reel is a favorite among many due to its practical design and clever, trustworthy construction. You get all metal gears and stainless steel pickup pins that ensure longevity. This is not just a fishing reel, it is a whole set with the perfect rod to go with.

How far can you cast a spinning reel?

Most spinning reels hold 160-180 yards of line if it is monofilament, whereas a typical baitcaster holds up to 250-300 yards. So, you will get more distance with a baitcaster. Spinners are bulkier and less durable in harsh climates than baitcasters. So you can not throw a long cast as easily with a spinning reel.

How to cast with a spinning reel?

Let me tell you the flexible procedure that you may follow easily

• Firstly, catch the rod at almost the waist level in a way so that it will stay below the rod. ...
• The hooking procedure should be done with the help of your forefinger. ...
• If the above process is being done in the right way, then pull it back so that the road trip will stay up to your dominant shoulder. ...
• Now you are completely done. ...

How to cast baitcaster reel for beginners?

The 5 Best Baitcasting Combos for Beginners

• Lew’s Mach 2 SLP Baitcast Combo
• Lews American Hero Combo
• Abu Garcia Black Max Baitcasting Combo
• Ugly Stik GX2 Baitcast Combo
• Lew’s Mach Smash SLP Baitcast Combo

How do you put a spincast reel back together?

0:493:14How to Re-spool a Spincast Reel - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the first step is to tie a simple overhand knot. Like so I'm going to go ahead and wrap thatMoreSo the first step is to tie a simple overhand knot. Like so I'm going to go ahead and wrap that around the reel then we're just going to tie another overhand knot and the key here is to make.

How do you fix a spincast reel that won't reel in?

1:373:27How to fix spincast reel - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd how you do that simply is you have to hold on to the handle. And spin this rotate this counterMoreAnd how you do that simply is you have to hold on to the handle. And spin this rotate this counter clockwise. At least this one was counter clockwise to remove it.

How do you take apart a Spincast?

1:4713:49How to Clean and Maintain a Spincast Reel - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo that's what we're going to do here we're going to just give it a little twist like that. And thenMoreSo that's what we're going to do here we're going to just give it a little twist like that. And then it pulls off just pulls right off the front. Give it a little wiggle.

How do you open a spincast reel?

0:071:47How to take the cover off a Zebco spincast reel - YouTubeYouTubeStart of suggested clipEnd of suggested clipHere you want to push the button to release the line like so and then counterclockwise to remove theMoreHere you want to push the button to release the line like so and then counterclockwise to remove the cover. So like that and then pull off see how it's notched in there I show you up close.

How do spincast reels work?

1:188:21The Spincasting Reel-What You Need to Know. - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe top image shows a reel with a short neck and a push button at the back of the reel for the thumbMoreThe top image shows a reel with a short neck and a push button at the back of the reel for the thumb. This particular reel is used on a bait casting rod.

How do you disassemble a Zebco reel?

0:417:34Zebco 33 Reel Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst we turn the top cover counterclockwise less than a thava turn and it will pull off. Next weMoreFirst we turn the top cover counterclockwise less than a thava turn and it will pull off. Next we turn the spinner head counterclockwise. Until it is removed.

How do you clean and lubricate a spincast reel?

How do I clean my spincast reel? After a day of fishing, rinse the reel inside and out with fresh water and allow to dry. Then lightly oil and grease easily accessible moving parts. This is especially important if the reel was used in saltwater or in dirty or muddy conditions.

How do you take apart a Zebco?

0:092:15How to remove the back cover from the New Zebco 33 - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll you have to do is push down on your thumb button. And it creates a little bit larger gap youMoreAll you have to do is push down on your thumb button. And it creates a little bit larger gap you reach in with your screwdriver. And you put a little pressure pop.

Are spincast reels any good?

In conclusion, spincast reels are the best casting reels and they are quite easy to use as compared to other types of reels. They are cost effective and durable. However, it is important that you learn how to use them properly.

What is the difference between a spinning reel and a spincast reel?

Unlike the spincaster reels, spinning reels are designed with an open face and a metal bail to prevent the line from nesting. The reel is mounted on the bottom of the rod for better balance when casting and the drag adjustment is located on top of the reel.

How do you take apart a button reel?

Locate the nut at the front of the reel. Spin it counterclockwise. Grab the assembly that protects the reel spool and pull it off the reel. Spin the star-shaped knob counterclockwise and remove it from the reel.

How do you take apart a button reel?

Locate the nut at the front of the reel. Spin it counterclockwise. Grab the assembly that protects the reel spool and pull it off the reel. Spin the star-shaped knob counterclockwise and remove it from the reel.

How do you remove the top of a fishing reel?

How to Remove a Spinning Reel SpoolHold the spinning reel so the spool faces up.Grab the knob on top of the spool, which holds the spool to the reel. On some reels, this knob also controls the drag system. ... Pull the knob off the reel when you can.Grab the spool and pull it straight up and off the reel.

How do you disassemble a baitcaster reel?

9:3219:02How to Disassemble and Clean a Baitcaster for Beginners (Part 1)YouTubeStart of suggested clipEnd of suggested clipHold it with your thumb nail on one side and push gently with a Philips screwdriver. Again makingMoreHold it with your thumb nail on one side and push gently with a Philips screwdriver. Again making sure you don't shoot it halfway across the room like that. A little plastic piece here that comes.

How to clean rust off spinning reel?

You can clean the disc and remove the rust using sandpaper or a wire brush and solvent , or simply replace the discs with new ones.

What is wrong with baitcasting reels?

Another common problem with baitcasting reels is a drag that doesn’t engage or can’t be adjusted. Always make sure that you keep your reel properly oiled as this can usually eliminate most of the problems you’ll run into, especially a faulty drag system. However, if the problem does arise, the first thing you’ll want to do is check the drag washers.

What do you use to secure reels?

Pliers – It’s likely that you’ll have to use a set of pliers to secure certain parts of the reel as you work on them. Needle nose pliers like these are best.

Why isn't my braid reel working?

Finally, if you find that your reel isn’t working after you’ve put braided line on the spool, you might have failed to properly install backing or might not be using a reel that’s braid-ready. In either case, if you notice line slippage, you can solve this problem by wrapping some electrical tape around the spool before you tie your braid on.

What happens if you rust your fishing reel?

Significant amounts of rust in your fishing reel will lead to serious performance problems and is something you should address as soon as you notice it so that you don’t allow the issue to get worse.

Why won't my reel close?

With a reel that has a cast bail that won’t close, you might be looking at having to repair or replace the bail wire itself if it’s bent or warped.

Why is my spinning reel hard to turn?

If your spinning reel becomes hard to turn, you’ll need to check to make sure there isn’t any type of obstruction in the internal components. This can often happen if you’re using a reel in saltwater that isn’t made of corrosion-resistant material. However, if the problem arises on a freshwater-only reel, it’s likely that there’s some type of debris inside the reel that is getting in the way.

What can go wrong with a spinning reel?

Many things can go wrong with a spinning reel, and the drag system is one of the more difficult areas to repair. Spinning reels require constant maintenance and cleaning to run smoothly, especially if being used in salt water. There are a surprising number of moving parts in the spincast reel, and a lot of strain is put on each part.

Why is my spinning reel frozen?

A common problem with spinning reels is a frozen drag, which is often caused by dirt, debris, or the drag being left tightened. Always loosen your drag completely after using your spinning reel. If loosening the drag and turning the spool frees the drag, then there is usually no need for disassembly. Simply tighten the drag tension knob to test it. ...

How many washers does a spinning reel have?

Smaller spinning reels generally have just two washers, while larger spinning reels have more. Identify and replace any broken parts. Inspect the spring clip, the drag knob and each washer for chips, cracks and rust. If you identify any compromised pieces, order replacement parts from the maker of the reel. If two pieces are rusted together, you ...

How to disassemble a spincast reel?

Disassembling spincast reels, which must be done to clean or repair them, takes only a few minutes. Grab the front cover of the reel and spin it counterclockwise. Pull it off the reel. Pull the cover off the back side of the reel. Locate the nut or screw that holds the handle on the reel. Turn it counterclockwise to remove it, ...

How to remove a reel handle?

Locate the nut or screw that holds the handle on the reel. Turn it counterclockwise to remove it, and then pull the handle off the reel. Locate the nut at the front of the reel. Spin it counterclockwise. Grab the assembly that protects the reel spool and pull it off the reel.

What was the first reel that fishermen used?

By Larry Anderson. The first reel many fishermen ever hold in their hands is a spincast reel. These reels operate at the push of a button and are easier to learn to use than are other types of reels.

How to remove a spindel from a reel?

Turn the spindle and gear assembly upside-down to look at the back of the reel, where a retainer clip installed on top of the spindel holds the gear mecanism in place. Remove this c-shaped clip with needlenose pliers.

What is a Shakespeare spincasting reel?

Shakespeare spincasting fishing reels are closed-face reels with a simple push-button operation to make casting the line virtually foolproof. Disassembling the reel is not much more complicated than using it for fishing. The housing removes in seconds and the internal gear mechanism can be separated into its component parts in a matter of minutes for cleaning, greasing and oiling.

How to unscrew reel cover?

Unscrew the reel cover with the hole for the line by turning counter-clockwise. Set aside the cover.

How to look up a Shakespeare reel?

Use the model number printed on the side of the reel housing to look up the schematic parts diagram for that particular Shakespeare reel. A list of schematics for Shakespeare reels by model number is linked in the reference section. These diagrams will aid in identifying different internal parts.