Repairing Guides

how to repair a stand up paddle board

by Kari Heller Published 3 years ago Updated 2 years ago
image

How to Repair Your Stand-Up Paddle Board

  • Types of Board Material. The two common types of boards you’re likely to attempt a repair on are inflatable and hard...
  • Repairing an Inflatable Board. The first thing you want to do when trying to fix a leaking inflatable SUP is to find the...
  • Making Repairs to a Hard Board. With extended use your hard board will eventually get...

Full Answer

How do you fix a paddle board that won’t stand up?

The PVC Stitch solution forms a patch that’s flexible, strong, and completely water resistant. Many seasoned paddle boarders won’t hit the water without some of these repair kit essentials. For minor dings, you can use a quick-curing epoxy product such as Solarez UV Cure Epoxy Ding Resin to smooth out your board for a clean finish.

Can an inflatable paddle board be repaired?

At least temporarily or in case of need, you can also repair your inflatable paddle board yourself. Most boards come with repair kits. With this repair kit and my instructions, your board can be repaired relatively easily by yourself. My guide here I not a solution for the fastest possible repair. Take your time and follow all steps properly.

Can you fix a hole in a paddle board core?

Even instances in which you can see the foam core (for epoxy paddleboards). If the hole is too big and the following solutions won’t cut it, go to a professional. Let them advise you on what to do. Also, before you go through the trouble, check whether it is a cosmetic issue. That may not require fixing—maybe just a coat of paint.

How do you fix an air leak on a paddle board?

Use the pencil to mark the location of the leak and let the air out of the paddle board. Lay out the cover so that the area around the leak is as flat and wrinkle-free as possible on the substrate. Clean the plane around the marked leak with acetone and a clean rag.

image

How do you repair an inflatable stand up paddle board?

2:093:55How To Repair An Inflatable Paddle Board Puncture - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe need to let the glue dry for five to ten minutes before we combine them and apply the pressureMoreWe need to let the glue dry for five to ten minutes before we combine them and apply the pressure for them to join if you're wearing gloves. You can actually carefully touch the glue.

Can a paddle board be fixed?

To repair the ding yourself, we highly recommend using Solarez for SUP as your paddle board repair kit. It's basically a tube of resin that you squeeze into a hole in your board that will solidify when exposed to UV. Its a super easy and quick fix.

How do you fix a paddleboard?

1:363:37How To: Patch an Inflatable SUP Board - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith the patch laid down roll out the patch using pearl roller or roller rasp in at least fourMoreWith the patch laid down roll out the patch using pearl roller or roller rasp in at least four different directions. This will match the glue together and help remove any air bubbles.

Can you use Gorilla Glue on a paddle board?

Gorilla glue foams up when it's mixed with water, and so it is great for glueing together busted boards (it what I used on Boyums board and my 19' Speedboard) but it sands like soft plastic.

How do you fix a big crack in a paddle board?

1:3913:27How to Repair Crack or Ding in SUP and Surfboard - YouTubeYouTubeStart of suggested clipEnd of suggested clipAround this crack and get all of it out what you're looking to do is grind away all of the broken.MoreAround this crack and get all of it out what you're looking to do is grind away all of the broken. And loose fiberglass you want to grind. The be as big as it takes to get two good solid fiberglass.

How do you repair a leaking paddleboard?

0:582:21How To Fix a Leaky Stand Up Paddleboard Valve - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt when it's inflated but it's not going to get as tight as it could if you tighten it while it'sMoreIt when it's inflated but it's not going to get as tight as it could if you tighten it while it's uninflated. So basically what you need to do is take one hand and hold underneath.

What glue do you use to fix a paddle board?

For boards made of PVC or urethane-coated material, Clifton Urethane Adhesive is a great glue for applying a patch.

What is in a SUP repair kit?

The SUP repair kit includes SUP deck pad repair patches, a wrench and SUP repair glue. The 2-piece strong and durable PVC patches provided in the inflatable paddleboard repair kit are perfect for inflatable SUP seam repair. The wrench is ideal for replacing or repairing the air valve.

How do I find a leak in my paddleboard?

As with a bicycle inner tube, the easiest way to find the leak is to use soapy water. The best thing here is to spray this water on the paddle and write down with a pen where small bubbles form. The larger the bubbles, the greater the leakage. In general, leaks are located along the board rails or at the valve.

What glue is good for vinyl?

Polyurethane glue is ideal for gluing thinner flexible vinyl together as well as gluing vinyl to other surfaces like wood or plastic.

How do you glue a SUP paddle?

0:188:21Quickblade FAQ's: How to Cut and Glue Your Paddle - YouTubeYouTubeStart of suggested clipEnd of suggested clipI tear off a piece about 5 inches long and you're going to see you're going to tape it to the end ofMoreI tear off a piece about 5 inches long and you're going to see you're going to tape it to the end of the paddle right now temporarily. And you'll see what we use that for.

Can you use super glue on a surfboard?

1:2412:32How To Fix Your SurfBoard In Seconds! - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsually when it's a little ding. I just use superglue. Because it's quick easy. And it's prettyMoreUsually when it's a little ding. I just use superglue. Because it's quick easy. And it's pretty strong I mean super glue is pretty strong.

How do you fix a foam paddle board?

2:366:43How To Repair a Softop-CP Surfboard - YouTubeYouTubeStart of suggested clipEnd of suggested clipClear. We're gonna use your same piece of cardboard. Dab it in your area of repairs try to smooth itMoreClear. We're gonna use your same piece of cardboard. Dab it in your area of repairs try to smooth it out as much as possible I'll save a lot of sanding afterwards you can also put a piece of

Is it safe to paddle board in the rain?

Stand Up Paddle boarding in rain is possible. In fact, this watersport can be practiced all year around. SUP boarders may experience colder and rougher conditions in rainy weather. Therefore, appropriate preparations are necessary.

Will a paddle board work without a fin?

Stand up paddleboard fins are an essential part of your paddleboard rig. Without fins your board would start to turn radically with every stroke, making the whole paddling experience pointless. Fins allows you to move forward in a relatively straight line, or “track”.

Does salt water damage paddleboard?

Salt can corrode the material and weaken the seams over time. Rinsing with fresh water will prolong the life of your board.

How to repair a crack in a paddle board?

How to: Let the paddle board dry completely. Sand and clean the crack and the area around it then wipe it dry. Apply epoxy over the crack and around it using a brush. Allow it to dry for a few minutes. Use a different brush to apply a second layer of epoxy over the crack.

How long does it take to repair an epoxy paddleboard?

The process may be a little complicated if the hole or crack is huge on your epoxy paddleboard. But with the right kit, you can fix it in a few hours —as long as you follow the instructions carefully. Inflatable paddleboards are even easier to repair. And the required materials are readily available too.

Do SUP boards come with a repair kit?

There is a reason why some SUP boards come with a repair kit. As a paddle board owner, you have to be prepared to deal with minor damages. You will encounter them sooner or later, regardless of how careful you are. When it first happens, you can take the SUP board to a shop. But at some point, you have to learn how to do it yourself.

Can you fix a crack in an epoxy paddleboard?

You can fix most cracks and dings at home. Even instances in which you can see the foam core (for epoxy paddleboards). If the hole is too big and the following solutions won’t cut it, go to a professional. Let them advise you on what to do. Also, before you go through the trouble, check whether it is a cosmetic issue.

How to fix a leaking inflatable SUP?

First you can pump the board and wipe the outside with a sponge and soap, attempting to find where the bubbles are forming as you move across the surface.

What type of board do I need to repair?

Types of Board Material. The two common types of boards you’re likely to attempt a repair on are inflatable and hard boards. Inflatable boards are filled with air and are susceptible to getting punctures that require a patch to fix. Hard boards are similar in material to traditional surf boards and are comprised of a fiberglass-reinforced plastic ...

How long does it take for glue to dry on a board?

Wait for the glue to dry for five to seven minutes and then apply the patch to the board. Use the edge of a blunt object with a smooth surface to press out the air bubbles from underneath the patch. Let it dry for about a day before re-inflating the board.

What to do if you have gouges in your board?

If you have large gouges or missing pieces in your board, it’s better to seek the help of a professional or just cut your losses and buy a new board. But if you have only minor repairs to do on your board, there are a number of products available that will make repairing your board a simple task.

Can hard board get dings?

With extended use your hard board will eventually get dings and other damage. The more severe damage can penetrate the outer shell of the board and expose the inner foam. Failure to repair the board when this happens can result in water getting inside and potentially ruining an otherwise salvageable board.

How much does a SUP repair kit cost?

If yours didn’t or you bought a used SUP, you can get a repair kit in stores or online for less than $30. Most inflatable SUP repair kits come with PVC patches and adhesive. To fix valve leaks, look for a SUP repair kit that contains a valve wrench.

How to repair a split in a fiberglass deck?

Follow these 10 steps for a general split repair. Mix one part hardener to two parts resin to create your epoxy. 2. Fill in the split with your epoxy. 3. Layer epoxy-soaked fiberglass cloths over the damaged area. 4. Smooth out the fiberglass cloth to remove any air bubbles. 5.

Can you damage a SUP board?

Becoming an active stand-up paddle boarding enthusiast or if you work SUP into your exercise routine it can be fun and adventurous. Unfortunately, having too much fun on the water will inevitably result in damage to your board. With ample time and the appropriate supplies, you can fix minor dings, punctures, and scratches yourself ...

Change the valve on an inflatable stand up paddle

The inflatable paddle boards are robust and designed to last over time. Despite this, it is possible that your valve may need to be changed or simply tightened. Don’t worry, you will find here the techniques and advice to solve this.

Maintenance of a SUP

It is very important to use and maintain your paddle properly. Indeed, to be able to enjoy your board for a long time, a few rules must be respected.

How to fix a ding on a board?

1. Make sure the board is dry. Before starting to fix the ding you want to make sure the board is completely dry. To do this, you want to keep your board out of the water and store it in a cool, dry place, ideally with low humidity. Store the board until it completely dries.

What to do after a board session?

The first thing you want to do after each session is to check your board to make sure you have no dings or dents in the board. If the dings or dents puncture the core of the board and are not fixed, water will slowly leak into the board and damage it. The good news is that most dings are easy to repair.

What kind of SUP boards can be repaired?

There are basically three kinds of boards when it comes to repair: epoxy, polyester, and inflatable.

What is solar epoxy repair?

"Solarez" Epoxy Repair Putty is formulated for repairing styrofoam-core (EPS) boards. Perfect for fixing and sealing cracks and dings. It completely cures in as little as 3 minutes when exposed to direct sunlight. This product reduces the human error factor present in the conventional mixing of resins and hardeners, and speeds up the repair process.

Can you use epoxy to fix hard board?

HARD Board. There are some quick fixes using pre-mixed epoxy or repair tape. There is also the conventional method, requiring manual mixing of resin and hardener. Be sure the area you are working on is clean and dry before you start.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9