- Practice the Pattern of the Swirl Ceiling. Match the texture before you begin working on your swirl ceiling. ...
- Remove the Damaged Section of the Swirl Ceiling. Remove the damaged portion of the ceiling. You don't need to pull out any power tools yet. ...
- Attach a New Section of Drywall. Measure the area that is now free of drywall. Cut a new piece of drywall to those exact specifications.
- Tape the Drywall Seams. Using spackling and seam tape, tape the seams that connect the new piece of drywall to the existing ceiling.
- Add Several Coats of Mud. Apply two coats of mud to the affected area. The first coat should cover the tape and make a good foundation.
- Blend the Texture. The specific swirl pattern will determine whether you will work in a small or large circular pattern.
- Texture the the New Drywall on Your Swirl Ceiling. Now apply the mixed texture to the new drywall. Follow the pattern you practiced in Step 1.
How can I get rid of a swirl pattern ceiling?
How to Repair a Swirl Plaster Ceiling
- Sand Down Damaged Areas. You want to sand any problem areas down to a flat surface. ...
- Prepare the Joint Compound. The joint compound is going to be used to redo the swirls on the ceiling. ...
- Add the Swirls. ...
- Finishing Touches. ...
- Clean Up. ...
- Eliminate the Swirls. ...
How to smooth out a textured ceiling?
Textured Ceilings: Cons
- The Look is a Bit Dated. Although textured ceilings are currently used in many homes, some people might view its appearance as outdated or unappealing.
- Repair Is More Difficult. If a portion of your ceiling becomes damaged, replacement isn’t as easy as painting over it. ...
- Older Ceilings Could Have Asbestos. ...
How to get rid of swirl ceiling?
- William on Mar 25, 2018 It is either plaster or drywall compound. Covering it is the only solution. ...
- Christel on Mar 25, 2018 Have you tried sanding? Helpful Reply
- Rose Broadway on Mar 25, 2018 Removal can be messy. ...
- Leann Rush on Mar 25, 2018 No, we thought about it but if we were going to go that route we would just put new drywall up and make that ...
How to retexture a textured ceiling?
Texture additives can be mixed into most oil-based and latex paints. Touch up spray is available for repairing acoustic or popcorn ceilings. Powdered texture compounds are best for heavy-duty texturing jobs. Smooth eggshell or satin paint can be applied on top of the textured wall or ceiling to highlight the depth of the effects.
Can a textured ceiling be repaired?
Mist water over the surrounding ceiling texture in an area about 24 in. out from the patch to soften it so you can scrape it off to prep for the taping work (Photo 3). Then tape, mud and skim-coat the entire patch. Sand it smooth and you're ready to spray.
How do you repair a hole in a swirl ceiling?
1:112:44How to patch repair hole in an aertex ceiling swirl - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe just fill that area all up it doesn't have to be neat at this stage. But it just has to cover itMoreWe just fill that area all up it doesn't have to be neat at this stage. But it just has to cover it now if you can look that there's a we're doing it above this swirl.
How do you repair a water damaged textured ceiling?
1:3210:18How to repair texture on a water damaged drywall ceiling step by stepYouTubeStart of suggested clipEnd of suggested clipDown any little edges along the perimeter that way it's going to be a nice blend to the originalMoreDown any little edges along the perimeter that way it's going to be a nice blend to the original texture. Take a knife to apply the mud.
Can you paint a swirl ceiling?
Applying paint to textured ceilings is a pretty straightforward process. Whether using a roller or spray gun, you can paint your textured ceiling without the hassle or expense of a professional painter.
Are swirl ceilings outdated?
A. Swirl ceilings are still installed today because they are less expensive to do than a smooth finish.
Can you repair Artex ceiling?
Yes you can patch Artex and both of the previous guys were correct, its best to get a plasterer as its not a diy job, cheers and all the best Chris N.
How do you smooth a textured ceiling?
Add some joint compound to the hawk. Scoop a small amount of the joint compound off the hawk using the taping knife, and then apply it in thin, smooth coats over the textured ceiling. This technique requires multiple coats, so don't feel the need to fill in all the low spots on the first pass.
How do you fix a speckled ceiling?
0:472:40How To Repair Popcorn Ceiling Texture - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing a sweeping back-and-forth motion feathering the texture into the surrounding. Area shake theMoreUsing a sweeping back-and-forth motion feathering the texture into the surrounding. Area shake the can periodically during use for large repair.
How do you fix knockdown ceiling texture?
6:489:59Amazing trick to match knockdown texture on a ceiling repair! - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou basically want to dab. And pull and that brings the the mud down to where it's gonna lay outMoreYou basically want to dab. And pull and that brings the the mud down to where it's gonna lay out like the knockdown texture. So you just rapidly dab and pull add more mud.
Can you paint sand swirl ceiling?
Or more importantly, should you? In both instances, the short answer is yes. It doesn't have to be particularly taxing to paint over a textured surface, while doing so can result in a far more chic and elegant finish.
How do you cover Artex ceiling paint?
1:202:43Artex Smoothit - YouTubeYouTubeStart of suggested clipEnd of suggested clipApply an even coat with firm sweeping strokes always work the first coat into the texture in severalMoreApply an even coat with firm sweeping strokes always work the first coat into the texture in several directions to fill in any little gaps.
What are swirl ceilings?
A swirl texture, as it's name implies, leaves a swirled pattern of half circles across the ceiling. Generally the pattern moves across the ceiling as a collection of circles laying on one another until the circles end into the wall on the other end of the room.
How do you repair a small hole in a textured ceiling?
Step 1: Using Drywall Compound, Put a Layer in and around the Hole. ... Step 2: Using Tape, Bind the Bristles of an Old Paintbrush into a Round or Oval Shape. ... Step 3: Load up the Bristles with More Compound.Step 4: Apply the Compound from the Bristles in a Quick Up-Down Manner around the Whole Newly-Patched Area.More items...•
How do you repair swirl plaster walls?
0:306:39How to Repair a Plaster Wall with a Swirl Sand Finish - YouTubeYouTubeStart of suggested clipEnd of suggested clipDifferent than joint compound is joint compound has a bonding agent built in whereas plaster doesn'tMoreDifferent than joint compound is joint compound has a bonding agent built in whereas plaster doesn't if you don't use a bond er. Then it has a tendency to chip. So we want it to adhere perfectly.
How do you repair a textured ceiling?
6:579:59Amazing trick to match knockdown texture on a ceiling repair! - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou basically want to dab. And pull and that brings the the mud down to where it's gonna lay outMoreYou basically want to dab. And pull and that brings the the mud down to where it's gonna lay out like the knockdown texture. So you just rapidly dab and pull add more mud.
Can you put filler on ceiling?
For an easy, hassle free repair, simply mix U-Can Smooth Ceiling Patch and Filler with water according to instructions in the tub and work into the area to be filled and repaired.
The first step is repairing the hole
Repairing a damaged textured ceiling starts with replacing the damaged drywall underneath the texture. Here's the right way to prep the area for a new coat of ceiling texture.
How to Fix a Hole in the Ceiling: Replacing the drywall
Probe with a nail to find the framing on either side of the breakout. Mark the cut between the framing, then make those two cuts until you hit the framing. Then cut alongside the framing at the sides.
Required Tools for this Project
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.
Required Materials for this Project
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here’s a list.
Why do ceilings crack?
Many ceilings develop cracks over time from changes in humidity expanding or contracting ceiling joints. These cracks aren't usually signs of structural damage, but they should be repaired so they don't grow. Ceilings with textures are more difficult to repair than flat ceilings.
Can you fix a texture ceiling?
Ceilings with textures are more difficult to repair than flat ceilings. You may not be able to match your existing swirl pattern exactly, but you can come close enough so that no one is likely to notice the fix. In any case, it will be less obvious that an unrepaired crack.
How to achieve sand swirl texture on ceiling after repair
So I am repairing a ceiling that had paint peeling due to water leaks (leak issue has since been repaired). This job was completed by a contractor years ago but he did not match the ceiling texture. You can see the repair he made in the area surrounding the damage (see photo).
Comments (2)
I've never used hot mud, but I'd apply the texture in the final skim coat (I'm very neat when I work w/ mud :) Practice creating the pattern on a separate piece first, so you know how to achieve the match. A brush or comb (something with teeth) is most commonly used to make that swirl pattern.
How do I fix a drip in my ceiling?
Step 1. Protect the floor in the room by spreading plastic tarps over it before beginning the repair process. If any items remain in the room, such as furniture, cover them with tarps as well. Don safety glasses and old clothes, since working on the ceiling often causes drips. Video of the Day.
How wide is a paint brush for a ceiling?
6- or 7-inch wide paint brush. Many ceilings constructed of drywall simply have a coat of paint, but others have a more decorative appearance. Using a joint compound or special paint, you can create numerous patterns on the ceiling, such as a swirl.
How to get paint out of a paint can?
Insert the tip of a 6- or 7-inch-wide paint brush into the paint until it is approximately two to three inches deep. Pull the brush out of the paint, and drag the sides of the brush along the top of the paint can to remove the excess paint.
Can you use joint compound to paint ceiling?
Open a can or tub of sand paint in the same color as the existing ceiling. If desired, you can also use a joint compound thinned with water until it is the consistency of thick paint.
Can you reapply swirl texture on ceiling?
If a ceiling with swirl pattern needs to be repaired, you must reapply the texture. Matching the existing swirl texture will take some practice, but it is not expensive, and most home owners can master the task. Advertisement.
What is a swirl texture?
A swirl texture, as it's name implies, leaves a swirled pattern of half circles across the ceiling. Generally the pattern moves across the ceiling as a collection of circles laying on one another until the circles end into the wall on the other end of the room.
What is the best way to spray mud on drywall?
Generally a tradesman will roll the mud on to the ceiling with a paint roller using a heavy nap roller cover. For larger jobs a heavy duty airless paint sprayer is used to spray the mud onto the surface of the drywall.
Does swirl texture cover imperfections?
A light sanding is needed to remove any large imperfections. Swirl texture will not cover many imperfections so all pockmarks, humped seams, and tool marks need to be removed before applying swirl texture.
Is swirl mud thinner than drywall mud?
The drywall mud needed for swirl texture must be thinned considerably. The consistency of this mud is thinner than any other mud used in the drywall taping and finishing process.
