hold the knife with the button towards the floor, push the blade a bit deeper in the well to release tension, tap the knife to shake the button loose and see if it will open … its likely the return spring for the button is broken, or the sear (pin) that holds the blade closed broke off in the blade hole, by tapping the knife with button facing down sometimes you can shake the broken part loose to free the blade...….BillDeshivs is a memer here and can totally handle the repair.
Full Answer
How do you fix a broken Switchblade?
A simple push of the button causes the blade to come out and it goes back inside with another push. These knives are easy to use and also easy to repair when something goes wrong. Remove the outside of the switchblade to check the internal components.
How do switchblade knives work?
Switchblade knives are made of a blade and an exterior housing or case. When the knife isn’t in use, the blade stays hidden inside this case. A simple push of the button causes the blade to come out and it goes back inside with another push. These knives are easy to use and also easy to repair when something goes wrong.
Can my knife be repaired?
I can fix major play, blade peek, knives that fail to lock open and/or closed. ECT Most repairs require at least 3/4 disassembly of the knife. These repairs can also be made to some of the heavier built lever and button operated switchblades by makers such as Case and Kabar.
How to fix a wobbly switchblade knife?
Tighten up all the screws on the outside of the knife. One problem owners sometimes find is that their switchblade knife is wobbly or doesn’t feel very strong. The best way to fix this is to ensure that the screws are all firmly attached.
Why did switchblades become illegal?
The law came in response to their perceived use by juvenile delinquents and gangs and associated media coverage, as well as by the 1958 passage of the Switchblade Knife Act in the United States.
Why is my OTF knife not working?
0:211:18What to Do When Your OTF Knife Comes Off Track - YouTubeYouTubeStart of suggested clipEnd of suggested clipInside just not engaged correctly. And as you go to fire it it'll. Come off track and your blade wonMoreInside just not engaged correctly. And as you go to fire it it'll. Come off track and your blade won't be connected to the mechanism inside anymore.
How do you fix a crack in a knife?
0:045:18Repairing a Cracked Blade /Hairline Fracture on a Kitchen Knife by ...YouTubeStart of suggested clipEnd of suggested clipSo we got enough room to do this with I'm gonna use the stone wheel today just to get in there andMoreSo we got enough room to do this with I'm gonna use the stone wheel today just to get in there and do the rough work.
How does a switchblade mechanism work?
0:101:29What's inside a switchblade? - YouTubeYouTubeStart of suggested clipEnd of suggested clipCover. Inside what we find is a strange spring mechanism which latches on to the knife unlatchingMoreCover. Inside what we find is a strange spring mechanism which latches on to the knife unlatching the edges allows us to remove the spring latch and get a closer look now this beveled edge is what
Do OTF knives wear out?
Over time and use, the mechanism wears out. If your OTF knife is struggling to release or failing to retract easily, even after a thorough cleaning, it's a good sign that it is time to replace it.
Do OTF knives need to be oiled?
Oiling – Regularly oiling the blade is one of the best things you can do to lengthen your out the front knife's life. Some recommend using a thinner, dry lubricant because it's less likely to gum up than a thicker lube. We recommend Tuf-Glide or RemOil.
Can you fix a chipped knife blade?
When tiny bits of the cutting edge actually get chipped off, the only way to fix that is to sharpen the knife by grinding steel away with a coarse whetstone or diamond plate to form a new edge. If you have a large chip, you'll need to remove a lot of steel.
Can a broken knife blade be repaired?
If the blade chips, the only way to repair the blade is to reduce the height of the blade and create a new edge. We can create a new tip for your blade. When we recreate the point of the knife we will have to grind down metal from the existing blade to form a new tip.
Is it OK to use a chipped knife?
If you care about your knife's edge and smooth cutting, even small chips introduce drags in slicing and tears when doing fine cutting. A chipped knife can be a real bummer. Removing a chip from a knife is a more extreme version of sharpening.
Are switchblades illegal in the US?
There is no federal restriction on ownership, possession or carrying of a switchblade knife. There are some states that have enacted laws regarding switchblades (see State Laws Regarding Auto-Open Knives). The majority of states allow auto-open knives.
What is the difference between a switchblade and an automatic knife?
If there is nothing blocking the blade and it stays closed, the knife is an assisted opener (assuming it has a mechanism to help open the knife). Another way to look at it: If you are able to open the blade without exerting any effort on the actual blade, it's a switchblade.
What makes a switchblade a switchblade?
0:171:35What Is a Switchblade? | Knives - YouTubeYouTubeStart of suggested clipEnd of suggested clipSwitchblade is a knife when you depress the button and the blade pops out and a lot of states nowMoreSwitchblade is a knife when you depress the button and the blade pops out and a lot of states now switch blades over two inches are illegal. So if you are going to have or carry a switchblade you do
How does OTF knife work?
Contrary to folding knives which are operated manually, OTF knives are automatic and when activated the blade springs open through the front and locks into place. There is usually a button or slide switch that activates the internal mechanism to allow the blade to eject.
Do OTF knives have a safety?
0:004:28D.A Out The Front Knives do have safeties - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo how y'all doing Jeremy do double-action OTF have a safety feature. She hear that a lot here someMoreSo how y'all doing Jeremy do double-action OTF have a safety feature. She hear that a lot here some people say that they have a safety feature.
Where are Templar knives made?
TexasTheir OTF design is changing the game and knife owners everywhere are wanting a Templar in their pocket. Backed by a Lifetime Warranty, all of Templar Knife's products are designed and developed in the Company's home state of Texas.
How to stop a switchblade knife from rusting?
Apply a lubricant to the inside of the knife. Rust, dirt and debris are all factors that cause a switchblade knife to stop working properly. A thin coating of oil or lubricant will prevent the dust from sticking and stop rust from forming.
What is a switchblade knife?
Switchblade knives are made of a blade and an exterior housing or case. When the knife isn’t in use, the blade stays hidden inside this case. A simple push of the button causes the blade to come out and it goes back inside with another push. These knives are easy to use and also easy to repair when something goes wrong.
Why is my switchblade knife so wobbly?
The best way to fix this is to ensure that the screws are all firmly attached. If even one screw isn’t properly in place, the whole knife will feel wobbly.
Why isn't my switchblade working?
Oftentimes if a switchblade isn’t working properly, it’s because of an obstruction inside the knife. Pay particular attention to the area under the switch. If you see anything in the way, move it carefully. Apply a lubricant to the inside of the knife.
Where are the retraction buttons on a knife?
Check the retraction buttons located on the side of the knife, directly below the blade. When you push on these buttons, you can easily slide the blade back inside the housing. If there’s anything trapped beneath the buttons, it won’t close. Tighten up all the screws on the outside of the knife.
Can you cut yourself with a switchblade?
Warnings. Be careful when removing the housing of your switchblade. If the knife is sharp, you may cut yourself accidentally. Focus on the laws in your state if you're planning on asking someone else for help. Most states have outlawed the use of switchblade knives and both you and your helper can get in trouble.
Repair and Restoration of Spring Operated Knives
I offer repair and restoration services for vintage switchblade knives. I offer my services at a fair rate and can fabricate most parts needed that cannot be replaced with originals or repaired.
American Switchblades
I am one of the only repairmen in the country who is willing to even attempt major repairs on vintage American switchblades of the many George Schrade patents. These brands include Schrade Cut, Schrade Walden, Presto, Press Button Knife company, Schrado, Remington, wade and butcher, E. Weck, Case XX.
Restoration
Restoration known more commonly as "professional cleaning" is done to remove as much damage as possible from all metal parts and re applying finishes as close to factory as possible and usually without disassembling the knife. This covers blades ,backspring, bolsters and handles.
German Switchblades
I also offer many services for German switchblades. All too often old leverlocks have thier kicksprings break because they slip out of place in the knife. I replace these broken or missing springs with new ones that will never slip out again and should last a lifetime.
What I won't Do
I will not swap parts between knives to make a common knife into something very rare. Anything that requires complete disassembly gets my MM mark stamped discreetly inside the left liner so if anyone is curious about a knife they can glance in there and see if it has ever been apart in my shop.
Italian Switchblades
I can repair most any problem you masy be having with you Italian switchblade as well as american, German and other switchblade. I can replace damaged or missing springs, handles, buttons, and other small parts.
Re: Switchblade repair
"...Men may spurn our appeals, reject our message, oppose our arguments, despise our persons ___but they are helpless against our prayers. "
Re: Switchblade repair
Bill DeShivs here on AAPK is another good option. He’s a switchblade guru. http://www.billdeshivs.com/bd/
Re: Switchblade repair
"...Men may spurn our appeals, reject our message, oppose our arguments, despise our persons ___but they are helpless against our prayers. "
stiletto repair?
If you like Automatic knives, this is the forum to discuss and display them.
stiletto repair?
Hello all. My Dad gave me this knife. He said he had it a real long time. I've never been able to get it open. My only family heirloom knife, so it means a lot to me. The bail is kinda decorated. Not looking to sell it just get it working. The button pushes down but won't release the blade.
