- Clean your jacket. Clean the jacket using cold water and a sponge to wipe down the outside of the jacket. ...
- Soften the wax. Take a tin of Barbour Wax Thornproof dressing. ...
- Wax your jacket. ...
- Dry your jacket. ...
- Re-wax your jacket once a year.
Full Answer
Can a Barbour jacket be repaired?
Upon entry, you immediately notice the racks and racks of well-worn old Barbour jackets that have been sent in for repair. In some cases it’s just a minor fix or re-waxing, in other cases are life or death and major surgery is required.
How to fix a tear in a leather jacket?
Take a pair of scissors and cut a strip of tape to size, leaving a margin of about 6mm/¼ inch around the tear. Don’t forget to round off the corners of the tape. This will ensure a strong hold and prevent it from lifting. Next, poke any stray down back into your jacket.
How do you fix a burn hole in a puffy jacket?
Need to fix a burn hole in your puffy? We have a simple fix to rips, tears, and holes in down or nylon jackets, ski pants and snow gloves. From GORE-TEX® rainwear to The North Face® parka, easily patch your favorite waterproof garments without dampening its look or style. All you need is some clear or black nylon repair tape or gear patches.
How do I repair a rip or tear in my gear?
Clean the repair area with isopropyl alcohol to remove any dirt or body oils that may prevent a good bond. Trim any loose threads or feathers. Peel off the backing on a Tenacious Tape Mini Patch or Gear Patch and apply it over the rip, tear, or hole. Patch should overlap tear by 0.5" (12 mm) in all directions.
Can you re-wax a wax jacket?
In the majority of cases we can successfully repair and re-wax a wax garment, however some items are simply beyond repair because they are too damaged or are outside of our allocated time to provide and complete a repair. If this applies to your wax garment our customer service team will contact you and return your garment. Re-Waxing may initially change the appearance of your jacket giving it a darker colour and sheen finish. With wear, the appearance of your garment will change.
Can you wax a Barbour jacket?
We recommend that you re-wax your jacket annually depending on wear and use a small re-wax for accessories which include waxed cotton hoods, belts and dog coats.
Can you return waxed clothing?
If you wish to return a waxed garment for servicing, please print and complete our garment return form below, highlighting which repairs are required and send your jacket to us with your payment clearly marked for the attention of 'Repair Department'.
What river is Barbour in?
It is three large buildings, a couple of minutes from the yawning mouth of the Tyne river, whose deep port was hugely popular in the nineteenth century – Barbour made its name kitting out workers, sailors and stevedores around that port.
How many lines are there in the waxed jacket factory?
The factory building has five production lines, where seamstresses perform all the steps it takes to make a classic waxed jacket, one after another. The first one assembles the parts of the patch pockets; she then clips the pockets onto a revolving chain, which carries them down to the next worker; she, in turn, stitches those pockets to the jacket fronts.
What is the biggest problem for Jean?
One of the biggest issues for Jean, the director of customer services, is finding and storing cloth, linings, buttons and hardware that is no longer made, in order to repair the old garments. As recently as the 1970s, the linings weren’t even uniform to the type of product, so different jackets had different lining patterns.
What happens when wax is ripped?
When there is a rip in the wax cloth, a new panel or strip is usually added, so that it runs down to a seam. A small patch, just covering the rip itself, tends to be more fragile.
Is Barbour permanent style?
Barbour is not quite the level of craft or quality that we normally feature on Permanent Style. However, rather like US brand Filson that we covered recently, they deserve mention for the beautiful way they age and their commitment to service and repair.
Is it cheaper to repair a motorcycle jacket?
Repairing the jackets is not cheap. Often, it costs more than the original – which in itself is an interesting reflection of the difference in manufacturing techniques, of a production line vs one-offs. But we all appreciate the beauty of an old, much-loved garment, and waxed cotton ages as well as any. My vintage Barbour motorcycle jacketis a good example, but actually the heavier, green, country jackets are even better.
Can you mismatch a collar and body size?
You can however mismatch the collar and body sizes which, again, may be helpful for some.
How to fix a down jacket that is leaking?
If the down fill of your jacket is escaping, try to poke it back inside the jacket. Rip off a strip of tape large enough to cover the tear and stick it carefully over the damaged area. Smooth out the tape to ensure a good hold.
What to use to patch a hole in a jacket?
Duct Tape. For field repairs, where you just need to patch a hole quickly, the classic solution is simply to stick some tape over the rip or tear. Duct tape or gaffer tape generally works well, as it sticks to most fabrics, and is an item that most climbers and hikers carry in case of emergency. If the down fill of your jacket is escaping, try ...
What is a down jacket?
Whether you’re climbing, hiking or backpacking, a down jacket is almost always a useful item to have stashed in your backpack. Modern jackets are tougher than they look, largely due to the use of ripstop fabrics. However, down garments are still susceptible to wear and tear. After all, when it comes to kit the great outdoors has more than its fair share of hazards. That might be a hole caused by a flying spark from a campfire, a ripped sleeve caught on a stray branch or a snag in the shoulder from the rogue pick of an ice axe. Fortunately, with the right know-how it’s easy to repair a down jacket.
What companies repair down jackets?
An alternative option is to contact a specialist independent company. Scottish Mountain Gear, Lancashire Sports Repairs or Mountaineering Designs are good examples. These three companies have a wealth of experience in repairing down products to an extremely high standard. As well as fixing holes, rips and tears, they can even replace or top up lost down. This will ensure your jacket continues to keep you as warm as it should.
Who makes nylon patch?
These are made by a number of companies including McNett Gear Aid, Kleiber, Down Jacket Repair, Prym and Dritz. They are available in a variety of colours. Most are self-adhesive, eliminating the need to glue or heat-seal the patch.
Can you patch a down jacket with duct tape?
A down jacket patched with duct tape will also add to your ‘gnarly climber’ or ‘rugged outdoorsman/woman’ credentials. Note that duct tape is difficult to remove once applied. If you’re considering having the jacket professionally repaired when you get back to civilisation (see final section), use sparingly.
Can a brand match fabric?
Though using an official repair service is sometimes costly, brands are usually able to match fabric colours and types. This means repairs are unlikely to be very noticeable or result in a loss of garment performance.
How to patch a tear in a tentacle?
Peel off the backing on a Tenacious Tape Mini Patch or Gear Patch and apply it over the rip, tear, or hole. Patch should overlap tear by 0.5" (12 mm) in all directions.
How long does it take for Tenacious tape to adhere to a sleeve?
If you do a repair before cleaning the gear, wait at least 24 hours for the Tenacious Tape patch to adhere properly before washing it.
Do you wash down before patching?
Before making a patch repair, clean down and nylon gear first. Using our Revivex formulas, hardworking ski jackets, pants, and rainwear stay fresh and will continue to protect us from the elements. Read our blog to learn how to wash GORE-TEX fabrics or find out how to wash down jackets so they keep performing at their best.
Where is the Barbour repair shop?
The Barbour repair shop is tucked away in a comparatively small room at the back of the main factory in South Shields, England. It’s a relatively calm space when you consider the frenetic energy that fills the factory floor not too far away. Upon entry, you immediately notice the racks and racks of well-worn old Barbour jackets that have been sent in for repair. In some cases it’s just a minor fix or re-waxing, in other cases are life or death and major surgery is required. The casual observer would say: “Why go to all the trouble just to save some old ratty coat?’ While those of us who know better would instruct the men and women of the Barbour repair shop to “please do all you can to save her”.
Is Barbour factory repair a minor repair?
Upon entry, you immediately notice the racks and racks of well-worn old Barbour jackets that have been sent in for repair. In some cases it’s just a minor fix or re-waxing, in other cases are life or death and major surgery is required.
Is a Barbour coat better than a new one?
Much like the Red Wing re-crafting process, an old worn Barbour coat is better than new. While it’s nice to add to your collection and get new things, old and worn is always better in this situation. Fix don’t replace is my motto. Very simply, these finely made heirloom products –an old coat, pair of boots, leather briefcase or cherished suit– are dear old friends that are worth more repaired than replaced. One look around at the tattered Bedales, Beauforts, Internationals and other assorted Barbours in the repair shop says it all. Please help my old friend.
