How to Fix Your Leaky Thermarest.
- Step 1: Find the Holes. There are a couple ways to do this. I used my bathtub, which is probably fastest. Fill it with about 3 inches of water and ...
- Step 2: Plug the Holes.
- Be the First to Share.
Can a thermarest mattress be repaired?
A Thermarest is just for sleeping. Teach your children never to stand or jump on an inflated sleeping pad. If you do end up with a leak, you can repair it easily by following these simple Thermarest repair instructions. Open the valve and let the mattress inflate. Blow in more air until it is very firm. Close the valve.
How do I repair a hole in my Therm-a-rest?
Mark the hole with a marker. If you cannot locate the hole with the soapy water, fill a bathtub with water, and submerge your pad. Look for small air bubbles escaping from the pad into the water indicating the location of the hole. Obtain a Therm-a-Rest repair kit including a packet of HotBond Adhesive, patch, and wood stick or similar.
Can you repair my Therm-a-rest tent?
We are able to mend small holes in the fabric of your insulation and repair or replace zipper sliders. The repair team can mend tears in the fabric or mesh of your Therm-a-Rest tent and repair bent or broken tent pole segments.
Is it possible to clean a thermarest pad?
I have never had this happen - and I've never even known anyone who's had this happen - but if it does, you can buy a replacement valve kit. A Thermarest pad can be easily cleaned by wiping it with a damp cloth. Allow it to air dry.
See more
How do you fix a self-inflating sleeping pad?
1:272:28How to repair a self inflating mat | Innovative Family CampingYouTubeStart of suggested clipEnd of suggested clipOnce you're ready to apply the patch. It's as simple as applying a sticker apply the pets to theMoreOnce you're ready to apply the patch. It's as simple as applying a sticker apply the pets to the fabric. And make sure that the pet is fully glued to the fabric.
How do you repair a Therm-a-Rest valve?
0:241:28Classic Valve Replacement Kit - YouTubeYouTubeStart of suggested clipEnd of suggested clipPull away from the pad while twisting and pulling the valve straight out before installing the newMorePull away from the pad while twisting and pulling the valve straight out before installing the new valve clean the valve seat thoroughly. Next you'll want to squeeze a thin bead of adhesive. Around.
How do you find a leak in a Therm-a-Rest pad?
If you can't find the leak by sponging soapy water onto the pad, then submerge the pad....Pinpoint the Leak LocationFill the tub with water and add a small amount of soap.Inflate the pad.Sponge the soapy water onto the surface and watch for tiny bubbles to appear.Wipe and dry the spot, then mark it.
How do I find holes in Therm-a-Rest?
Look for small bubbles forming on the pad indicating the location of the hole. Mark the hole with a marker. If you cannot locate the hole with the soapy water, fill a bathtub with water, and submerge your pad. Look for small air bubbles escaping from the pad into the water indicating the location of the hole.
How do you fix an air mattress valve?
How To Fix An Air Mattress Valve LeakCheck If the Plug Is Properly Inserted Into the Stem. ... Change the Plug If Necessary. ... Replace the Valve Completely. ... Dry the Water You Used to Find the Leak. ... Use Some Glue. ... Spread the Glue. ... Put the Patch On the Glue/Damaged Area. ... Check the Air Mattress.More items...•
How do you clean a thermarest valve?
1:232:45How to Care for Your Therm-a-Rest® Mattress - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply wipe it with a cloth and warm. Water for stains and hard to remove dirt. You may use aMoreSimply wipe it with a cloth and warm. Water for stains and hard to remove dirt. You may use a household all-purpose. Cleaner. If the valve is dirty wipe the valve clean using a damp sponge.
Why is my thermarest deflating?
If it's not flat, but not as full as you inflated it before bed, the problem can often be attributed to the loss of air pressure as your mattress cools. This is particularly true if you inflate your mattress by mouth.
Does Tenacious Tape work on sleeping pads?
Inflatable Air Mattresses, Blow-Up Beds, and Sleeping Pads Most air mattresses can be fixed with GEAR AID adhesives and Tenacious Tape Repair Patches. Even some large, inflatable air mattresses or blow-up beds used at home can be repaired this way.
How do you fix a foam float pad?
1:092:50POOLCENTER.com - Texas Rec foam pool float chair Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe area and just fill it in real easily. And if the direction say you wet your fingertips. And getMoreThe area and just fill it in real easily. And if the direction say you wet your fingertips. And get a little water on there to smooth it out smooth out the edges.
How do I find a leak in my self inflating mat?
0:000:49Sea to Summit Mat Repair - Find Hole Self Inflating Mat - YouTubeYouTubeStart of suggested clipEnd of suggested clipPush down onto the mattress to increase the internal pressure small bubbles will form on the surfaceMorePush down onto the mattress to increase the internal pressure small bubbles will form on the surface of the fabric where there is a leak. Use a permanent marker to mark the sites of any leak.
What do you do with old sleeping pads?
You might also have luck selling the pad on a platform like eBay or OfferUp, but be sure to be accurate and transparent in the posting to indicate the pad has a leak. If none of the above options work, you could donate the sleeping pad to Goodwill. The last resort would be to put the product in the trash.
How do you use thermarest pump sack?
0:441:43How to use a Therm-a-Rest Pump Sack - YouTubeYouTubeStart of suggested clipEnd of suggested clipOpen the pump sack and gently blow into the opening. Once it is filled with air seal. The top andMoreOpen the pump sack and gently blow into the opening. Once it is filled with air seal. The top and roll it towards the valve pushing. Down on the pump sack to inflate the pad repeat.
How to clean a mattress that has a leak?
If it’s not readily apparent where the leak is, you can either submerge the mattress fully in water (a tub at home, or a body of water nearby if you’re out in the wild) or you can use a wet soapy cloth to wipe the mattress. In both cases, you’re looking for bubbles to form, which will indicate where the air is escaping.
Why is my mattress not flat?
If it’s not flat, but not as full as you inflated it before bed, the problem can often be attributed to the loss of air pressure as your mattress cools. This is particularly true if you inflate your mattress by mouth. The air going in is warm and, as it cools to the ambient temperature, you can lose quite a bit of pressure, ...
How long does it take for a pinhole to leak out?
In the case of a pinhole puncture that takes all night to leak out, it may take a while for bubbles to form, in some cases ten or more minutes. Patience is the most effective tool in the toolbox at this point. One trick is to fold the mattress over on itself when submerging it or soaping it up.
Is an inflatable mattress leaking?
We get many calls about perceived leaks, particularly with air mattresses. And one thing that is usually not a leak at all is a mattress that seems to have lost pressure during the night.
Can you fix a punctured mattress overnight?
If you’re at home, our Permanent Home Repair Kit can help you patch the puncture. Depending on the model of mattress, it may require sitting overnight, but since you’re home that shouldn’t cause too many issues. Pro tip: Check your pad and the rest of your gear a few days before heading into the backcountry.
Can you send a mattress to us for repair?
If you have tried everything, or your mattress damage is significantly more than you want to take on, you may send your mattress to us for repair. If the problem is covered under our Limited Lifetime Warranty, we’ll repair or replace your mattress at our discretion. These issues are limited to defects in material or manufacturing and usually limited to valve or seam failure. If we find that there are punctures/tears in the mattress, we can repair those, but these are typically a wear-and-tear situation.
Introduction
Do you have a hole in your Therm-a-Rest backpacking sleeping pad? Follow this guide to locate and patch the hole in your pad using a Therm-a-Rest repair kit, and get back to camping in comfort.
Step 1 How to Repair a Hole in a Therm-a-Rest Sleeping Pad
Blow up the sleeping pad full of air using the intake valve in the top left corner.
Step 3
Spray soapy water on the section of the pad where you think the hole is located.
Step 4
Look for small bubbles forming on the pad indicating the location of the hole.
Step 5
Obtain a Therm-a-Rest repair kit including a packet of HotBond Adhesive, patch, and wood stick or similar.
Step 8
Firmly press the patch, shiny side down, onto the HotBond Adhesive on the mattress.
Step 9
This guide can be used to fix similar types of sleeping pads. This patch will help you prolong the life of your camping gear!
What can be repaired
Our repair technicians can find and repair punctures, replace valves and reseal the seams on your mattress.
Cleaning
Your gear must be cleaned before it is sent to our repair technicians. A dirty mattress may be returned to the sender before repairs can be made.
Cost
Please note, we will require your approval and payment prior to processing any repair services that incur a fee.
Warranty
Therm-a-Rest takes pride in offering the highest-quality camp products and we stand behind every piece of gear that we make. We offer a Limited Lifetime Warranty on all products, except electronic devices, which have a 2-year Limited Warranty.
Step One: Inflate to Maximum
First, you need to inflate the mattress as fully as possible. Overinflation is the goal here, so blow it up as much as you can then set it in a hot sunny place to expand for a few minutes only. (You don’t want to blow it up, just force air through the leak).
Step Two: Spray in Soapy Water
Next you need to coat the entire mattress in a fine mist of soapy water. I use ordinary dish soap in a spray bottle and liberally spray down the entire inflated mattress. You want to identify leaks by watching for bubbles which form and either grow or fail to dissipate as the other bubbles naturally settle out.
Step Three: Circle Leaks in Permanent Marker
This one is self-explanatory. Don’t worry, you can clean the marker off with acetone or fingernail polish remover later if the circles bother you. Personally I like them; they show the product has been used.
Step Four: Deflate and Apply Toluene Glue
The fourth and final step is to partially deflate the mattress, wipe the area of the leak dry, then apply a toluene based glue such as Aquaseal or Shoe Goo or (as pictured) E6000. There are several similar products on the market. Be aware that toluene is not good for you, so wash your hands when you’re done.
