Repairing Guides

how to repair a toilet seat hinge

by Betsy Jakubowski Published 3 years ago Updated 2 years ago
image

How To Repair A Broken Toilet Seat Hinge

  • Remove The Seat. First, remove the seat assembly. To do this you’ll need a Phillips screwdriver and pliers. Lift the lid...
  • Purchase A Cheap Toilet Seat. Replacement hinges are expensive, often $30 or more per set. A replacement oak seat...
  • Secure The New Hinges To The Seat. Mount the hinges onto the stool and secure them firmly,...

Part of a video titled Fix loose toilet seat - replace hinge bolts - EASY DIY - YouTube
0:03
1:23
And take off the nut these pieces go through the top. And this piece will connect on the bottom. AndMoreAnd take off the nut these pieces go through the top. And this piece will connect on the bottom. And if you look it takes a screwdriver.

Full Answer

How do you replace a toilet seat hinge?

  • Lower the seat and locate the two screw covers at the back of the seat.
  • Put the flat-head screwdriver in the screw slot and hold it steady while you unscrew the nut from underneath the bowl.
  • Remove the nut and bolt and take the seat off the bowl.

How to replace your toilet seat hinges?

Replacing the Hinges

  • If there is a main pin connected to the hinges, you need to remove that as well. ...
  • Place it in the middle of the pin and strike the end with the hammer; the pin should come out without any tension.
  • Next, place the mouth of the pliers on the pin. ...

More items...

How to clean the hinges on a toilet seat?

  • Spray the outside of the toilet with a disinfectant bathroom cleaner and let the cleaner sit for a couple minutes, or as recommended by the manufacturer.
  • Starting with the tank or top, wipe down the back, front and sides of the toilet all the way to the floor.
  • Clean the toilet handle with a disinfecting wipe.

More items...

How to remove the screws on a toilet seat?

Removing Seat with No Screws

  • Gather the things you’ll need – hacksaw, protective wear, duct tape, rugs, and any knife.
  • Open the toilet lid and cover the remaining part of the toilet with duct tape. ...
  • Mark the areas you will be cutting through and sit the knife right underneath the toilet seat to guide you as you cut through.
  • Begin to cut gently moving one side to the other. ...

More items...

image

Are toilet seat hinges replaceable?

Over time, these hinges can break or wear out, requiring replacement. If your toilet seat hinges are broken or stripped out, you do NOT need to change the whole toilet seat, but instead only the hinges. With the right tools and spare parts, you can easily replace your toilet seat hinges.

How do I stop my toilet seat from moving sideways?

How to Fix a Loose Toilet: Locate and install seat stabilizers. Then install a set of toilet seat stabilizers, such as Safe-T-Bumpers. Loop the rubber band around the toilet seat and center the stabilizers so they touch the inside rim of the bowl. Drill a starter hole and secure the stabilizers with screws from the kit ...

How do you put a toilet seat back on a hinge?

0:571:37Hinge and Damper Replacement - Quiet-Close Toilet Seats - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the hinge assembly is secured to the toilet seat snap the bottom cover of the hinge assembly backMoreSo the hinge assembly is secured to the toilet seat snap the bottom cover of the hinge assembly back into place finally snap the toilet seat back into place close the cover caps and you're done.

How do you fix a toilet hinge?

0:351:24How to fix a loose toilet seat - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen I'll do the same step on the plastic bolt on the other hinge. Once the bolts are tight I'llMoreThen I'll do the same step on the plastic bolt on the other hinge. Once the bolts are tight I'll snap back on the hinge covers. And I'm done the toilet seat is secure.

Why does my toilet seat keep loosening?

A. Toilet seats often wobble because the holes in the toilet-bowl rim are larger than the diameter of the bolts, allowing movement that eventually makes the nuts loose. Tightening the nuts seldom works very well.

Why does my toilet move when I sit?

Toilets wobble when they aren't held securely to the floor, and if you let the wobble persist, they can leak and give you more serious problems. More often than not, the wobble is caused by loose toilet bolts, but the flange may also be responsible. It may be corroded, broken or set too high.

How do you fix a toilet seat fitting?

0:000:52How to fit a toilet seat - fitting guides from VictoriaPlum.com - YouTubeYouTubeStart of suggested clipEnd of suggested clipMost seats are fixed at the rear of the panel like this take out the old fixings. And clean the areaMoreMost seats are fixed at the rear of the panel like this take out the old fixings. And clean the area install the seal kit onto the new seat. And select the corresponding holes that will fit your pan.

Can a self closing toilet seat be fixed?

You can make adjustments to the bolts that hold the seat in place to fix a loose toilet seat. The only reason you would need to adjust soft-close hinges is if your soft-close seat is not closing at the right speed. Lift the toilet seat straight up off the hinges from the upright position.

Are all toilet seat hinges the same?

There are two main types of hinge fixings, top fixing and bottom fitting, and it is worth noting that not all hinges are suitable for all toilets. Bottom fixing toilet seat hinges feature a traditional style fixing which includes fitting two bolts down into your pan and then tightening them from underneath.

How do you fix a loose toilet seat without access?

2:073:10How to fix a toilet seat with hidden fixings - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can see there there's a little screw on the top. And we need to tighten up that screw. So we canMoreYou can see there there's a little screw on the top. And we need to tighten up that screw. So we can take a phillips head screwdriver. Tighten that one up nicely. Once we're done we can put our cap.

Introduction

This guide shows how to fix slow-close toilet hinges that have become loosened through extended use. The steps in this guide include removing the toilet seat, taking apart the hinge assembly, tightening the dampers, reassembling the toilet seat, and then putting it back onto the toilet bowl.

Step 6

Grip your needle-nose pliers in one hand and the hinge assembly in the other.

Step 7

Place the hinge assembly back into the toilet seat with the holes aligned.

Why replace toilet hinges?

Another great benefit of replacing faulty toilet hinges is that cleaning the toilet is simplified. You can move the seat easily and can clean the hidden areas without fear of the whole seat crumbling into pieces. If you care about your home’s hygiene, you will not want to deal with old hinges. Replacing them will do a lot more than just increase convenience when using the toilet.

How to remove a toilet seat?

The first step is to remove your toilet seat. Lift the toilet seats lid to see the two hinges that need replacing. Loosen the screws; it should be easy because you simply turn them in a counter-clockwise direction. Unscrew the hinges to loosen the lid and remove it. Step 2.

What are the parts of a toilet that wear out?

Some of the toilet parts that wear out after sometime include the seat hinges. They are vital and must be functional to prevent unnecessary movements when using the toilet. The hinges are found at the rear part of your toilet and ensure your lid can move up and down smoothly without getting stuck.

How to clean a hinge with vinegar?

Use a combination of vinegar and baking soda made into a paste. Rub the paste on the hinges using a soft piece of cloth. Scrub the area around the hinge or use a brush with soft bristles to avoid scratching the hinge and the porcelain. A toothbrush works fine and can be easily maneuvered.

What are rod and hinges made of?

Rod and hinges: They are also costly, but they are made for all toilets regardless of their sizes. They include a long metal arm and some hinges attached. When choosing the right toilet hinges to buy, always consider what will fit your toilet perfectly before choosing them due to their aesthetic appeal.

Why is the toilet seat tight?

The toilet seat must be tight to allow silence all throughout. A very loose toilet sounds like you are fighting someone as some of the pieces may fall.

Do toilet seat hinges look the same?

Toilet seat hinges may look like they are the same, but it’s not the truth. Hinges come in different sizes, and therefore you must know the best ones for your toilet. You can buy hinges of your seat brand which makes it easier to change them. If the seat is old fashioned and no longer available, you can make a particular order.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9