Repairing Guides

how to repair a torn fur coat

by Kenneth Corkery Published 3 years ago Updated 2 years ago
image

Best Ways of Repairing Fur Coats

  • Doing it Yourself. When faced with a fur coat repair emergency, it’s best to hand them over to professional furriers. ...
  • Contact a Furrier. Unfortunately, your fur coat will experience more damage than you can handle yourself. ...
  • Consider Restyling. Another option that is recommended for fur coat repair is restyling it. ...

Full Answer

Can you repair a fur coat that has a tear?

Their loss is your gain if you're willing to put in the time and a few dollars into repairing the coat. If the tear or hole is uneven, or the fur is dirty in places, carefully cut out the fur until the hole is even and clean. Sewing fur is fairly forgiving, but if you don't have a clean hole to start with, the patch won't last as long.

How do you remove fur from a fur coat?

Insert needle and thread, pushing the needle through the pelts with the thimble. When you have enough of the needle to grab on the other side, take the pliers and pull it though. Before you completely pull the thread tight, blow and brush the fur out of the way of the thread so it does not get caught.

What to do when a coat has a tear or hole?

Their loss is your gain if you're willing to put in the time and a few dollars into repairing the coat. If the tear or hole is uneven, or the fur is dirty in places, carefully cut out the fur until the hole is even and clean.

How do you repair a broken fur pelts?

When stitching pelts, use your fingers to gently separate the fur surrounding the damaged area so that the fur doesn’t get caught up in the stitches. Whip stitch along the edges of the seam as evenly and as closely as you can, pulling the thread tightly so that the stitches will be hidden underneath the fur.

image

Can you fix a ripped fur coat?

You will not need to remove the entire coat's lining, just enough that you can get to the tear. It is important to sew on the inside of the coat, not the "furry" side. Pull the rip together and pin so that the fur won't slip. Sew as close to the rip as possible, with small stitches.

How much does it cost to repair a fur coat?

Storage & Services Price ListStorage, Cleaning, Glazing, and WaterproofingReplace Worn Fur in Body and ElbowStarting at $400.00Shorten Coat Hem by TurningStarting at $395.00Shorten Coat Hem by CuttingStarting at $495.00Shorten Coat with French HemStarting at $495.0082 more rows

Why is my fur coat ripping?

Since fur naturally decomposes. Over time you will have rip, a tear or some dried pelts. The majority of the time, this can be repaired. New fur can be added to replace any fur that has been deteriorating over many years of wear.

Can you restore a fur coat?

Over time, you may find restoring vintage fur coats becomes necessary due to normal wear and tear. However, it isn't the only thing you may wish to do with your real fur coats. Fur restyling can also be a viable option to help transform your furs into a style you will love to wear.

How long does a fur coat last?

As long as you purchase a good quality fur from a reputable furrier it should last more than long enough to justify the cost. Although the longevity of fur varies from one type to another, a good quality mink coat, with proper care (storage and cleaning every year) can last up to 20 years or more.

What can you do with old fur coats?

You can resell your coat for money, or donate it to some charity. Alternatively, you can repurpose it to make other accessories, such as pillows and cushion covers, a new fur coat or any other fur garment.

How do you glue fur?

0:496:18DIY How to make Faux Fur Pillows | Hot Glue Method | Part II - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I'm gonna go in with my hot glue gun and just glue around the sides. And press those togetherMoreSo I'm gonna go in with my hot glue gun and just glue around the sides. And press those together making sure to align it as best as. Possible.

How do you sew fur?

2:095:47Way to Sew Fur Pelts Together. Sewing of Natural Fur ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou need to pierce with needle the edges of the fur pelts towards yourself starting sewing from theMoreYou need to pierce with needle the edges of the fur pelts towards yourself starting sewing from the right edge. First hair should not fall into the seam.

Do fur coats rot?

You should inspect your fur coats for dry rot. This condition occurs when the natural oils in the hide dry out, which causes the skins to become thin. Common signs of dry rot include tears in the neckline, pockets, and shoulders. If your coat sheds its fur, this is another sign of dry rot.

Can a mink coat be repaired?

Only a professional furrier can repair a tear or rip in the fur. You should not take a fur coat to a regular tailor for fur coat repairs. If there is a rip or tear in the lining of a fur coat or fur cape, the entire lining might have to be replaced.

How do you update an old fur coat?

Restyle, Renew, Revive: How to Make an Old Fur Coat Modern &...Change the Length. The length of the coat is one of the easiest things for many furriers to change. ... Take Off the Sleeves. ... Consider Sheering. ... Dye the Fur. ... Create Fur Accessories. ... Transform the Entire Coat.

How do you refresh a vintage fur coat?

1:424:11How To Properly Clean Fur Coat - Quick and Easy DIY Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust rub it if it gets dirty if you're if your fur is really dirty and dingy and your sponge getsMoreJust rub it if it gets dirty if you're if your fur is really dirty and dingy and your sponge gets dirty you can just wash it with soap and water and that's totally fine. And then just go back to it.

How much does it cost to redesign a fur coat?

Prices range from $650 to $1,000, depending on fabric. Coats start at $1,200 with the customer's own fur.

How much does it cost to store fur coats?

Fur storage costs are usually based on the value of your garments. So storing a coat valued at $500 may cost as little as $32 (or $39, including a year-round insurance policy).

How much does it cost to alter a mink coat?

As it is complicated to do it by yourself, we of course suggest going to a reputable furrier or tailor who has enough experience with altering fur coats. These prices are not cheap, though, and some of them can go from $300.

What does it mean to glaze a fur coat?

Glazing is a process of bringing out the natural luster and sheen of a fur after it has been cleaned. It involves a steaming and ironing process that will vary with each type of fur. Glazing will restore the life, luster and beauty of your garment.

How to repair a rip in a fur coat?

If the rip or hole in your coat is uneven, you will need to create an even edge by carefully using a small pair of scissors to cut the edge of the tear. You will also want to trim any fur along the edge of the rip as this fur may interfere with your ability to create small, tight stitches.

How to make a fur rip on a coat?

Begin by threading your leather needle with a thick, cord-like thread. Be sure to tie several knots in the bottom of the thread in order to prevent it from simply slipping through the material. Starting on the inside of your coat, begin making small stitches along the edge of the rip. Pull each stitch tight and ensure there is no fur stuck inside of the stitch.

How to get stitches out of a rip?

After knotting the thread, use your scissors to cut the thread from the needle and apply a small amount of super glue over the last few stitches. This will ensure that the stitches do not come out during normal, daily wear.

Can you pull a leather needle through a coat?

If this happens, using a pair of needle nose pliers to pull the needle can give you the leverage you need to easily pass the needle through the thick material of your coat.

Can you toss a fur coat into the closet?

Thankfully, this does not mean that you need to toss your ripped coat into the back of your closet never to be seen again. In fact, repairing those small rips and holes in your fur coat can be quite simple once you know what your doing.

How to store fur coats?

With fur coats, storage is key. If you're not choosing professional storage, keep your fur in a closet, away from light and heat. Just as natural fabrics need to "breathe," your fur does too, so don't keep it in a garment bag or in plastic of any kind. Don't attach jewelry or pins to your fur, and don't constantly carry heavy shoulder bags, as these cause pulling and wear. When doing any type of fur repair, it's best not to use glue. Glue doesn't bond properly on pelts and can damage them further by drying them out.

How to repair a rip in a pelt?

To repair fragile pelts, use a thin needle and baste with close stitches, making sure that you don't stitch too close to the edge, as this can cause further tearing. If the rip is in a particularly thin area, you can stitch it carefully, and then reinforce the repair by gluing a leather patch underneath the pelt.

How to stitch a pelt?

When stitching pelts, use your fingers to gently separate the fur surrounding the damaged area so that the fur doesn’t get caught up in the stitches. Whip stitch along the edges of the seam as evenly and as closely as you can, pulling the thread tightly so that the stitches will be hidden underneath the fur. Knot the thread several times and cut it with the scissors, leaving a tail that you can weave in with the needle. Make sure that you don’t cut any of the fur when you’re cutting the thread.

How to attach hooks to a coat?

To attach hooks, it's best to get new ones from the craft store, and make sure you get fabric-covered hooks of an appropriate size for the coat. When stitching the hooks, be careful not to snag the fur in the stitches. Sew the hook into the pelt, but be careful not to pull the stitch all the way through to the lining of the coat. If fur gets tangled in your stitches, pull out the hairs with your needle.

What to use to pull a needle through a pelt?

It also helps to have needle-nosed pliers , thick cord or heavy thread, scissors, and a thimble. If the pelts are thick, you can push the needle through with the thimble and use the pliers to pull the needle through on the other side.

How to get fur out of a stitch?

If it does, use the needle to pick it out of the stitch, flicking the fur back and forth with the needle. Brushing the fur with the fingers will smooth it over and hide the stitches. Continue until you are finished and tie off the thread, again pushing on the fur and blowing it out of the way.

How to repair Persian lamb fur?

Very often there is fur worn off, resulting in the ivory-colored skin showing through. Simply get a bottle of leather/shoe dye in the correct color at your local shoe repair shop or shoe polish section of the supermarket. If there is no dauber in the bottle, use a cotton swab to dab the color on the ivory skin. Use it sparingly and let it dry completely before wearing. You will be surprised and pleased at how the damage blends in and it makes the piece completely wearable.

How to get a pelt to not get caught?

Insert needle and thread, pushing the needle through the pelts with the thimble. When you have enough of the needle to grab on the other side, take the pliers and pull it though. Before you completely pull the thread tight, blow and brush the fur out of the way of the thread so it does not get caught.

How to sew fur?

When sewing a fur, here is how to proceed: Use a special leather needle, available at any sewing store. You will need a needle-nose pliers, thimble, thread and scissors. To attach one piece of fur to another, pin it in place to hold it while you sew.

How to fix a Persian lamb?

This is the only time I will recommend gluing a fur, since in most cases, it will show and you will permanently damage the hair if the glue gets on the fur. To repair the loose Persian lamb curls, use tweezers to hold back the curl from the skin. Take a dot of white glue on a toothpick and put a tiny amount on the skin. With the tweezers, gently press the curl back onto the skin. Voila! You have done another invisible fix. Persian lamb is one of the easiest furs to patch as well. If you find yourself with an actual hole in the fur, you can cut a piece from an old damaged garment made of Persian Lamb. These are easy to find on online auction sites and are usually titled “craft cutters”. Cut a piece a little larger than the hole, place it in the opening and sew it to the perimeter of the hole. The curls will hide the stitches. If you are repairing the flatter type of Broadtail lamb, you should open the lining and sew it in from the back to hide the seams, and then close the lining back up. Persian lamb is the most forgiving fur when it comes to repairs!

How to repair a torn seam?

If you need to sew a seam or tear, use a thin needle, as the torn skin is delicate and a thick needle will damage it further. Using a double thread, gently put the needle into the skin, but not too close to the edge or it will likely tear out and you will not be able to repair it at all.

What happens if you put a heavier lining on a coat?

but if you get a heavier lining, it will take more of the weight off the coat and the lining will carry more of the stress. Plus it will also add to the. warmth of the coat.

Where is Marc Kaufman Furs?

Marc Kaufman Furs in New York City, NY ships your fur purchases to wherever you may be. We have over 2000 quality furs to choose from. Marc Kaufman Furs of NYC has the most extensive online fur selection in the World.

Can you repair fur?

The caring of fur has it’s moments. Remember fur is natural and within time there can be some repair issues. Since fur naturally decomposes. Over time you will have rip, a tear or some dried pelts. The majority of the time, this can be repaired. New fur can be added to replace any fur that has been deteriorating over many years of wear.

How to repair a fur pelt?

The right way to do the repair would be to lift the lining and secure the separation closed on the skin side with furrier tape. This is a thin fabric with adhesive on one side. Some also additionally stitch it from the inside for better support and some use a thicker backing at times if more support is needed.

What needle do you use to repair a bearskin coat?

I found it important to use a glover/leather hand needle. They have a kind of very sharp triangular end. Regular sewing needles tend to rip thinner furs. I once repaired a very large bearskin coat for a Western reenactor. It was a lot of physical work and I felt like I had a big dog (bear) on my lap the whole time.

How to tell if a pelt is in good condition?

You can test the pelts condition by doing the "scrunch" test in your hand .. if the fur scrunches and doesn't crunch and feel stiff the skins are probably in good condition, but if there is crunching and stiffness you probably won't want to try to mend this yourself, it can cause larger & worse tears to appear nearby where the original tear was.

Which furs are less flexible?

There are furs with thicker skins like lamb, shearling, and mouton. Those do feel less flexible because they are so thick.

Who said mend the pelts from the back?

And as Mod Bod Furs said, mend the pelts from the back.

Can you scrunch a fur coat?

Please, please, please to not ever try to scrunch a fur coat. Pelts are leather. Scrunching them, just like scrunching a leather handbag, could cause cracks and possibly more damage even when the leather is good.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9