Repairing Guides

how to repair a usb plug

by Genesis O'Kon Published 3 years ago Updated 2 years ago
image

How to Repair USB Cables

  • Step One: Open Things Up If your plug has broken, cut it off with a pair of wire cutters. You’ll end up with an outer...
  • Step Two: Strip the Colored Wires Now, use a wire stripper to remove the colored outer covering from each wire. You only...
  • Step Six: Test After all your hard work, it’s time to plug your wire in and test it. If you followed...

Part of a video titled How to Repair a Severely Damaged USB Cable - YouTube
0:12
3:07
First cut the cord where the damage is located strip back the ends to expose the conductors on theMoreFirst cut the cord where the damage is located strip back the ends to expose the conductors on the shield. Side. Then strip about one inch off the long end of the cord to expose the braided cable.

Full Answer

How do you fix a loose USB port?

  • Remove the back cover, SIM card and microSD card
  • Remove the battery
  • Unscrew the midframe and disconnect various cables and screws

How to repair a bad power plug?

Tools

  • 2 Polarized and Non-Polarized Plugs. Polarized plugs have one prong blade bigger than the other. ...
  • 3 Vintage Plugs and Fabric Electrical Cords. Antiques or vintage appliances often have a fabric-covered power cord. ...
  • 8 Insert Cord Through Plastic Plug Cover. ...
  • 9 Wrap Wires Around Terminal Screws. ...

How to repair a moulded USB plug?

Moulded plugs are found fitted on most modern appliances and can't be removed. The only thing you can do on them is change the fuse, whereas plug tops you buy from the shop can be dismantled and rewired.

How to repair loose USB port?

Resetting the SMC for iMac, Mac Pro, and Mac Mini

  • Shut down the computer
  • Unplug the power adapter.
  • Press the power button and hold it for at least five seconds.
  • Release the power button.
  • Reconnect the power adapter and start the computer.
  • Check to see if your USB device works.

image

How do you fix a USB cable pin?

Place needle-nosed pliers over the bent pin. Squeeze the ends of the pliers to apply pressure to the pins. Bend the pin back into place. If the pin is bent to the left or right, bend the pin back into the vertical position first, before adjusting it to the left or right.

How do you fix a USB socket?

0:135:37How to Fix a Dead USB Port in Windows - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst things first check your USB port for physical damage insert your USB device into its port andMoreFirst things first check your USB port for physical damage insert your USB device into its port and wiggle the connector up and down. See if it's loose a loose USB port may require resolder.

How do you fix a broken USB charging port?

2:014:57HOW TO FIX MICRO USB PORT AT HOME !!!- NOT CHARGINGYouTubeStart of suggested clipEnd of suggested clipFirst I soldered the original D soldered micro USB charging port but it didn't work so I did placeMoreFirst I soldered the original D soldered micro USB charging port but it didn't work so I did place the charging port with new one solder read there microwaves.

Can a USB port be repaired?

In most cases, it won't be dead, and you'll be able to fix it. Remember, when your USB port is not working, you need to: Make a physical check. If necessary, make a physical repair to the port.

How do you rewire a USB plug?

0:123:07How to Repair a Severely Damaged USB Cable - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst cut the cord where the damage is located strip back the ends to expose the conductors on theMoreFirst cut the cord where the damage is located strip back the ends to expose the conductors on the shield. Side. Then strip about one inch off the long end of the cord to expose the braided cable.

Why has my USB socket stopped working?

The USB device may become unresponsive because of a race condition in the Selective Suspend feature. The Selective Suspend feature suspends the USB device to efficiently maintain battery power by enabling the computer to turn off the USB device. However, sometimes this feature may not correctly wake up the USB device.

How do you fix a loose mini USB port?

Cleaning the inside of the USB port using a toothpick is the easy way to fix a loose micro USB. By design, a Micro USB port charging and data port has a pretty strong fit, but over time they can get loose and become useless.

How do I fix my front USB ports?

0:335:25PC front panel USB ports repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipAt the bottom there are eight pins for the USBs themselves plus four mounting pins for the for theMoreAt the bottom there are eight pins for the USBs themselves plus four mounting pins for the for the USB. So we'll remove this from the motherboard.

How to fix a flash drive that won't open?

1. Plug your flash drive into your computer. The flash drive should fit into one of the rectangular ports on your PC's housing. If you're encountering errors on your flash drive or it won't display its contents, you may need to update its drivers or software using your computer's repair feature.

How to get files off a flash drive?

Windows - Open Start, click the File Explorer icon, and click your flash drive's icon. Mac - Open Finder and click your flash drive's icon. If the flash drive doesn't connect to your computer, you can try taking it to a tech department to see if they can still pull the files off of it.

How to eject a flash drive on Mac?

To eject it, click the eject icon next to the drive in the Finder, or click and drag it to the Eject icon in the Dock when on your desktop .

Why won't my flash drive work?

Finally, if the flash drive won't work because of physical damage, you should take it into a tech department or data recovery professional; if that's not possible, you may be able to fix it yourself by soldering the broken USB drive's circuitry to a working USB cable.

Where should a flash drive fit on a Mac?

The flash drive should fit into one of the rectangular ports on your Mac's housing. If you're encountering errors on your flash drive or it won't display its contents, you may need to update its drivers or software using your computer's repair feature.

What to do if you choose to seek the services of a professional data recovery company?

If you choose to seek the services of a professional data recovery company, be sure to describe your problems to the best of your abilities to ensure they have the tools and experience for the job.

How to check if a USB drive is working?

The first step is to insert your USB thumb drive into the computer's USB drive. Click on ' My Computer ' and choose the USB drive that appears. Right-click on the drive and go to ' Properties '. Then choose the ' Tools ' tab. Click on the ' Check Now ' button.

How to change the letter of a USB drive?

Click on 'Start' then ' control panel ' and then go to ' Security ' and choose ' Administrative Tools ' and click on ' Computer Management '. Right-click on your USB drive. You then choose the ' Change Drive Letter and Paths '. You can now assign any one of the available drive letters to the USB drive by simply clicking on it.

Why is my USB drive unreadable?

If it is a relatively new USB drive, it can be caused by low-quality NAND chips usually a feature in cheap drives. Not being able the access the controller software has caused the drive to be unreadable by the operating system.

How to open USB drive in Windows 7?

For Windows 7 Users as Following Steps: Start by inserting the USB drive into the port of your computer. Right-click on the USB drive in ' My Computer ' and then go to ' Properties '. Click the ' Tools ' tab.

Fixing a Bent or Broken USB Connector in Easy Steps

If you have a broken USB connector, you can fix it yourself. It’s easy and cheap. Here are the steps to follow: 1. Remove the plastic casing from the end of the cable. 2. Pull off the metal tab that holds the plastic casing together. 3. Unscrew the two screws holding the metal piece to the base of the connector. 4.

Use a Nose-Plier

A nose-plier is a tool used to grip and pull nails out of wood. A nose-plier consists of a handle, a jaw, and a nail-gripping surface. The handle is usually made of hardwood such as maple or oak, while the jaw is made of steel. Nail-gripping surfaces vary depending on what type of material the user wants to pull nails out of.

Time to Replace the Terminal

If you are using a Mac, you can easily replace the terminal by following these steps: 1 Open System Preferences > Keyboard > Shortcuts Tab

Soldering the Pins

Step 1: Remove the screws from the back of the keyboard Step 2: Take off the top case the plastic piece Step 3: Unscrew the ribbon cable connector Step 4: Pull the ribbon cable out of the connector Step 5: Solder the pins of the ribbon cable into the motherboard Step 6: Put the top case back on the keyboard Step 7: Screw the screws back onto the keyboard Step 8: Reassemble the keyboard Step 9: Connect the keyboard to the computer Step 10: Turn on the computer Step 11: Press the keys on the keyboard to test if everything works fine..

What to do if USB is bent?

If your USB stick is bent, you can try to carefully bend it back into shape. Use caution with this method.

How do USB sticks get damaged?

One of the most common paths to an unreadable card is when it’s been removed from a computer or laptop, without first safely ejecting the device. Do this once or twice, and you might be lucky.

Why is my USB drive unreadable?

Your USB drive might be unreadable, because of the assigned letter drive. To remedy this, insert the SD/USB device and change the drive letter by following these steps: Press the Windows key + X key combination. Click Disk Management.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9