how to repair a usb port

by Lonzo Koelpin Published 3 years ago Updated 2 years ago

[Solution] Windows USB Port not Working

Type: troubleshoot in the search bar and click Troubleshooting.
Go to "Hardware and Sound" > "Hardware and Devices" > Click on Advanced and check Apply repairs automatically.
Click Next and let the program check and fix existing problems in your drive > Click Apply this fix and click Next.

Full Answer

How do you fix a bad USB port?

USB Ports Not Working in Windows 10

Power Off Computer and Start Again. Sometimes the problem of USB Ports not working in Windows 10 can be fixed by the simple act of shutting down your computer ...
Reinstall Faulty Device Drivers. The problem of USB Ports not working in Windows 10 could be due to the drivers for USB Ports getting corrupted.
Disable Fast Startup. The Fast Startup option as available in Windows 10 can sometimes lead to Windows skipping USB Ports during the start up process.

More items...

Why is my USB port not working?

Why is My USB Port Not Working?

The USB driver is missing or outdated.
Hardware device is not connected properly to the USB port.
Recently installed system updates
Problems with the physical connection

How to troubleshoot an USB port?

Download the Windows USB Troubleshooter from Microsoft.
Double-click the WinUSB.diagcab to launch the experience.
Click the Next button.
The utility will detect and prompt you to select the device you want to fix. ...
Click the Next button. ...
Click the Close button.

How to diagnose and fix dead USB port?

Click Start and enter control panel
Select the corresponding result
Go to Hardware and Sound > Power Options
Here, find the selected plan and click Change plan settings > Change advanced power settings
Find USB Settings and expand to find USB selecting suspend setting
Change the drop-down menu to Disabled
Click Apply and OK to confirm

More items...

Can you fix a broken USB port?

In most cases, it won't be dead, and you'll be able to fix it. Remember, when your USB port is not working, you need to: Make a physical check. If necessary, make a physical repair to the port.

How can I fix my USB slot?

How to Fix USB Port IssuesRestart your computer. ... Look for debris in the USB port. ... Check for loose or broken internal connections. ... Try a different USB port. ... Swap to a different USB cable. ... Plug your device into a different computer. ... Try plugging in a different USB device. ... Check the device manager (Windows).More items...•

What causes a USB port to stop working?

The USB device is broken. Physical damage to the port. Missing drivers. Computer has difficulty detecting USB devices.

How do I know if my USB port is damaged?

Plug a variety of devices into the USB port you think is damaged. If none of them work, the port is probably broken. Connect the same devices to the USB ports on a different computer. If they work, this is another indication your ports may be damaged.

Can USB ports wear out?

Any cable over time will lose effectiveness and get worn out. The standard USB has a general minimum lifetime of 1,500 cycles of inserting and removing. Micro-USB and USB-C have a rated minimum lifetime of 10,000 cycles. It's also possible that a USB port can get worn out over time as well.

How do I test a USB port?

How to Test a USB PortInsert the loopback plug software and install it on your computer with the USB port you need to test. ... Insert the USB loopback plug into the USB port. ... Look at the lights on the loopback plug. ... As an alternative method of testing your USB port, plug in a plug-and-play mouse or other input device.More items...

How to fix a USB port?

As you can see, you have several options for repairing an unresponsive USB port. In most cases, it won't be dead, and you'll be able to fix it. Remember, when your USB port is not working, you need to: 1 Make a physical check 2 If necessary, make a physical repair to the port 3 Reboot Windows 4 Check the Device Manager, uninstall the USB Host Controller 5 Disable USB Selective Suspend power saving option

What to do if USB port is not working?

Remember, when your USB port is not working, you need to: Make a physical check. If necessary, make a physical repair to the port. Reboot Windows. Check the Device Manager, uninstall the USB Host Controller. Disable USB Selective Suspend power saving option. USB ports aren't the only potential weak spots on your computer.

How to fix laptop overheating?

It is particularly damaging to laptops, where overheating can reduce performance in seconds. To fix this, clean out the USB port with a can of compressed air. A vacuum cleaner might also prove handy here. Finally, grab a USB cable (or flash drive, whatever) and gently wiggle it around .

What is USB selective suspend?

USB Selective Suspend is a power saving setting that cuts power to the USB device, thereby reducing battery use. The feature usually works well, but at times makes it look as if there is a problem with your USB ports. Fix this by opening the Windows Control Panel and adjusting the settings.

What is a USB port?

USB ports are soldered to a board within your computer. This may be the motherboard but is typically a secondary printed circuit board (PCB). With regular use, ports can become movable, at times completely unattached. Often, this is down to the shape of the connected USB devices.

Why does my laptop overheat?

There's a chance that dirt, dust, and general detritus might have become embedded in the port. This can happen with laptop and desktop computers alike. Dust will reduce airflow, causing your system to overheat. It is particularly damaging to laptops, where overheating can reduce performance in seconds.

Is USB port a weak spot?

USB ports aren't the only potential weak spots on your computer. Looking after your hardware will reduce potential failures, and you can save a lot of money if you know how to test your PC for failing hardware. Share. Share.

How to get USB ports working again?

There are two things you can do with the device manager in Windows to get USB ports working again. Scan for hardware changes by right-clicking the name of your computer, and then clicking on scan for hardware changes. When the scan to complete and then check your USB device to see if it works. Another option is to disable and re-enable ...

Why isn't my USB port working?

If the device doesn't work in any of the ports, there's likely a problem with its hardware. If your device starts working when plugged into different ports, then the first port probably has a physical problem that needs to be fixed.

How to uninstall USB controller?

In the device manager, click the arrow next to the little USB cable so that it points down instead of to the right. Right-click on the first USB controller in the list and select Uninstall device. Repeat for each USB controller you find. Turn your computer off and then back on again.

How to uninstall USB port on laptop?

Close the Properties tab and right-click the name of the USB port. Click "Uninstall." Restart the laptop and plug a device into the USB port. Wait for a new window to pop up and follow the on-screen instructions to re-install the USB port software.

How to use USB port on another computer?

If the device works in another computer, click "Start" and select "Computer." Plug a device into the port and wait to see if the USB port shows up in the list of drives. Click on "Map Network Drive" if the drive does not appear. Choose a drive letter from the drop-down menu and double-click the location of the USB device. Click "OK" and try to use the port again.

How to use USB 2.0 on Windows XP?

Open your Web browser if your laptop is running the Windows XP. Navigate to the Microsoft website and download and install the Windows XP USB 2.0 driver (see Resources). Restart the computer and try to use the USB port again.

Step 2: Get Into !

To fix anything it is very obvious first we have to get inside which required a lot of force and even a screw Driver which I highly don't recommend. use any other polite way :P

Step 3: Check If Broken or Poor Solder Joint

After getting into the power bank, first thing I noticed was ports were not actually broken but fallen apart because of poor/bad solder joint.

Step 4: Disassembly

First disconnect the batteries so if anything goes wrong you will not blow up the circuit ! after which remove the PCB and remove the old Solder left on the Pads

Step 5: Solder !

Place the ports into their respective places and start the soldering process !

Step 6: Assembly

Ones soldering process is done reconnect the batteries and screw back the PCB in to its place. After which check if it works !

Repairing Guides