
Steps to Repair a Vacuum Cleaner Power Cord
- Investigate the damaged area of the cord. First, you need to examine the power cord. ...
- Tape it only if there are surface damages to the cord. You can use electrical tape in case of any trivial damage. ...
- Fix the cord. ...
- Replace the electric plug. ...
- Additional Help. ...
- Test the Vacuum Cleaner. ...
- Unplug the vacuum cleaner from the wall socket.
- Cut the cord a few inches above a damaged plug or if the wires are frayed around the plug. Remove the old plug, and discard it.
- Attach a new plug. Unscrew the cover on the new plug and push the body onto the cord. ...
- Reattach the plug body to the housing.
How to repair a cord rewind in a vacuum cleaner?
The Switch
- Unplug the vacuum cleaner from the wall socket.
- Use a screwdriver to remove the screws on the switch plate that hold the switch in place. ...
- Pull the cord out of the handle through its access hole. ...
- Push the wire back through the access hole. ...
- Wire nut the bare wires together with the switch wires. ...
How to repair your vacuum cleaner?
- If the filter is dirty, take it outdoors and tap it against a hard surface to knock out dust and debris. ...
- Some filters can be rinsed under cool water after you've knocked loose most of the debris. ...
- Change the filter (s) every 3-6 months to keep your vacuum running efficiently.
How do you replace a vacuum cord?
- Unplug the machine.
- Move the brush roller to the bottom of the unit.
- Untie the screws that hold the motor housing in place.
- Screw counterclockwise to join the nuts which hold the wires of the cord and motor.
- Calculate the distance from the cord ending to the strain release.
How to unclog a canister vacuum cleaner?
The vacuum is clogged!
- Unplug the vacuum.
- Find out where the clog is. To see if it is in the hose, unclip the vacuum hose from the attachment and the vacuum itself. ...
- Fix the clog. To fix a clog in the head, flip it over and look inside. ...
- Test the vacuum. Put the vacuum back together properly and plug it in Test it to see if it works better. ...

Can you fix a broken vacuum cleaner power cord?
Depending on the vacuum model, this repair can take between 10 and 30 minutes to complete. Power cord replacement is a basic repair for all sorts of machines and tools, and removing the old cord is always the first step.
Can I use electrical tape on my vacuum cord?
Oftentimes, in an effort to fix a cord, customers will wrap the damaged area with electrical tape - attempting to hide the area of exposed wires where it is frayed in the middle. We can attribute this to running over the cord with the vacuum cleaner.
Can you replace a vacuum cleaner cord?
While each brand of vacuum has a slightly different power cord, all cords are wired into the motor in the same basic fashion. It often takes longer to remove the vacuum's motor housing than it does to replace the vacuum cord. As you replace the old cord, make sure the new cord is the same weight as the old.
How do you fix a broken power cord?
1:115:21Best Way to Repair Broken or Chewed Power Cords - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo let's get started so what these plastic tubes are check this out it's heat shrinking tubing rightMoreSo let's get started so what these plastic tubes are check this out it's heat shrinking tubing right for making electrical repairs this kit this is heat shrink tubing as well different diameters.
How much does it cost to replace a vacuum cord?
It's also important to pay attention to the vacuum cords. Tishko recommends checking them daily. Replacing a cord might cost $85 in labor and up to $130 for the new part. “If you have a $400 two-motor upright, you're looking at almost 50 percent of the product cost just to replace the cord,” he says.
Can you repair a chewed cord?
Cut, Separate & Strip the Wires Cut the chewed section and plug off the cord using a wire cutter. Separate the wires by pulling them apart about one to two inches down. Strip about one inch off the ends of the two wires using a wire stripper. Twist the ends of the wires so they are tight and no longer frayed.
How do you splice a power cord?
2:4710:14Power Cord Splice and Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipSelect one on is the smallest diameter. Possible that will still slide easily along the cord. Don'tMoreSelect one on is the smallest diameter. Possible that will still slide easily along the cord. Don't forget to take into consideration whether the heat shrink will fit over the splice section of wire.
How do you replace a power cord plug?
Steps on How to Replace and Wire a Plug:Step 1: Cut the Old Plug and Slice the Jacket. First, cut off the damaged plug. ... Step 2: Attach Wires to Terminal Screws. Open the replacement plug so you can reach the terminal screws inside. ... Step 3: Reassemble Plug Replacement. ... Step 4: Test the cord.
How can I fix my power cord without soldering?
1:465:02How to fix a broken wire without soldering - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlace the crimp connectors in the middle of the pliers as shown. So the sizes match. Press hard andMorePlace the crimp connectors in the middle of the pliers as shown. So the sizes match. Press hard and wait a few seconds. Then release the pliers.
Is it safe to splice a power cord?
Technically, you're not supposed to splice extension cords. Even if you solder the wires, wrap each wire with electrical tape and encase the whole splice in heat shrinkable tubing, it still won't have the abrasion resistance of a new cord. Plus, it's not permissible under the National Electrical Code.
How do you wrap a vacuum cord?
0:231:19How to wrap a vacuum cord properly - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd knots take that cord and wrap it right around the Machine over the handle. And put it in theMoreAnd knots take that cord and wrap it right around the Machine over the handle. And put it in the hook. Don't wrap the cord around both of these hooks. Around here that will also cause a kink.
Can you wrap a frayed cord in electrical tape?
Electrical tape isn't pretty, but it's generally cheap. You can take your time neatly wrapping the cable to reinforce it, but the best way to prevent any more damage is to wrap the split or fraying part of the cable several times with electrical tape, then work your way out from that spot.
Does electrical tape prevent sparks?
You're looking for the dielectric breakdown voltage of electrical tape. For this 3M brand it's 10kV. So, if you get to about 10,000 volts, it'll spark through. For the equivalent thickness of air (0.216mm) it would only take 648 volts to spark.
How do you cover exposed wires without electrical tape?
What Can I Use Instead of Electrical Tape? Several electrical tape alternatives are available, with common solutions including heat shrink tubing and wire connectors - also known as wire nuts. Wire connectors are essentially insulated caps with internal threading.
How to pull cord out of vacuum?
Measure the distance between the end of the cord and the strain release. Release the screws holding the cord’s strain relief and cord retainer to the vacuum’s body. These two function together to keep you from accidentally pulling the cord out of the motor as you operate the vacuum. Pull the old cord off the vacuum and pull the strain relief and cord retainer from the cord as well.
How to keep cord from pulling out of vacuum?
Release the screws holding the cord’s strain relief and cord retainer to the vacuum’s body. These two function together to keep you from accidentally pulling the cord out of the motor as you operate the vacuum. Pull the old cord off the vacuum and pull the strain relief and cord retainer from the cord as well.
How to replace a power cord with a strain relief?
Slide the cord retainer and strain relief onto the end of the new power cord. Place them in the same relative location as the old power cord. Measure to ensure you have the same amount of cord between the strain relief and the motor. Do not fasten them in place at this time.
How to connect a power cord to a motor?
Take note of the orientation of the wiring on the motor. A white wire from the power cord should connect with a white wire on the motor. A pair of colored wires should join on the other wire.
How to get wires out of vacuum motor?
Separate the wires. If the white wire has a terminal connection that fits into the motor, pinch the fastener together with a pair of needle nose pliers and pull the terminal connection straight out of the vacuum’s motor. Separate the prongs of the terminal with a knife to pull the wire free.
How to reattach a vacuum cleaner?
Put the handles back onto the vacuum. Reattach the motor housing. Slide the filter back into position and reattach it. Slide the belt back into position and reattach it to the brush. Put the housing back over the brush and secure its screws into place.
How to secure colored wires together?
Twist the ends of the colored wires from the motor and the cord together. Twist a wire nut you removed earlier clockwise over their ends to secure them together.
What Causes Damage to a Vacuum Cleaner Power Cord?
Some of the most common causes that can result in the damage and failure of a vacuum cleaner power cord are provided below:
How to Repair & Fix Vacuum Cleaner Power Cord: A Step by Step Guide
1. Inspecting the damaged area: investigate the damaged area of the power cord to access the damage. Thoroughly examine the damaged area to determine whether the defect is at the center, the switch, or the plug.
Conclusion
Generally, vacuum cleaner power cords are prone to damage due to the fact that they are not particularly durable. As a result, if damage occurs, it does not necessitate the purchase of an entirely new vacuum. Simply performing a repair will resolve the situation.
FAQS
Begin by removing the old cord and remembering to unplug the vacuum from a power source. Place the vacuum in such a way that the brush roller on the vacuum’s bottom is visible.
What to do after you have a power cord repaired?
After you have successfully repaired the power cord, plug in the device and check whether the vacuum cleaner is working properly. In case the problem persists, there must be a problem in some other part of the vacuum cleaner. Hence, a local professional is the lender of the last resort.
Why does my vacuum cord stretch?
Cord stretching may occur when people unknowingly extend the wires too long while vacuuming. It makes the wires in the cord break loose which disrupts the transfer of electrical current to the device.
Can you fix a vacuum cord?
Vacuum cleaner power cords are vulnerable to damage as they are generally not very durable. It’s not very difficult to fix it all by yourself. However, you can make your old vacuum cleaner back to life with these simple steps.
Can you use electrical tape on duct tape?
You can use electrical tape in case of any trivial damage. Avoid using masking, shipping, or duct tapes. Electrical tapes are shock-sensitive and insulate the inner thread-like wires to prevent sparks and shocks.
Can You Fix a Vacuum Cleaner Cord?
Yes, you can. If it’s not entirely worn out or the vacuum cleaner is pretty new yet, a little bit of fixing will help.
Wrapping Up
That’s It! We tried to give you an idea of common vacuum cleaner cord fix tips. Hopefully, you were able to bring it back to work.
How to ensure an accurate installation of a new vacuum cord?
To ensure an accurate installation of the new cord, it may be a good idea to draw a simple diagram of the wire arrangement. Also, power cord wires can be manufactured in a variety of styles. Take note of the wire styles used on your vacuum cord and double check that the new cord has the same connections.
How to remove strain relief from vacuum cord?
Unscrew the cord retainer and use a pair of needle nose pliers to remove the strain relief. The strain relief helps to put the final bend in the vacuum cord, so take note of its orientation before removing it. After removing the retaining pieces, pull the old cord out of the vacuum. Ask Question.
How to separate wires from one another?
Unscrew the wire cap that holds the wires together and separate them from one another.
Why do you need to access the motor to remove the cord?
Because the wires must be unattached from the motor in order for the cord to come out, accessing the vacuum's motor is the first step toward cord removal. Accessing a vacuum motor always involves some disassembly. How much disassembly will be determined by the vacuum design being repaired.
What is the black wire on a vacuum?
The black wire is an exposed wire style that twists onto an adjacent blue motor wire. The two wires are held together with a twist-on wire cap.
How to install white wire on motor?
Install the white wire from the new cord by pressing its terminal on the motor fitting. Starting the connection by hand and then following up with a pair of pliers is usually the easiest way to do this.
How long does it take to repair a vacuum?
Depending on the vacuum model, this repair can take between 10 and 30 minutes to complete.
How to rewind a cord on a vacuum cleaner?
Wipe the cord with a paper towel. Grip the cord a few inches away form the hole. Give the cord a tug to engage the winding mechanism. Feed the cord through your fingers as the vacuum cleaner cable rewind retra cts into the vacuum cleaner. Now your vacuum with cord rewind should work well.
How to get rid of a vacuum cleaner plug?
Remove the vacuum cleaner's plug from the wall outlet. Play the beam of a flashlight on the hole where the cord enters the vacuum cleaner. With your fingers, remove loose dirt or other contaminants sticking in the hole. Wind double-sided tape around the eraser end of a pencil. Place the pencil, eraser end first, into the sides of the hole.
How to get a vacuum cleaner out of a hole?
Grip the cord a few inches from the hole in the vacuum cleaner that it feeds into. Give a sharp tug on the cord. Release the cord to re-engage the winding mechanism. Feed the cord back into the vacuum cleaner until the plug stops at the hole. Remove the vacuum cleaner's plug from the wall outlet.
What is automatic rewind on a vacuum cleaner?
Hunker may earn compensation through affiliate links in this story. An automatic rewind mechanism is what allows the long cord of an electric vacuum cleaner to be stored inside the vacuum cleaner's case when not in use. The electric cord can get stuck and refuse to budge, making for a potential tripping hazard.
How to get rid of a pencil hole?
Place the pencil, eraser end first, into the sides of the hole. Twist the pencil clockwise as your circle the inside of the hole, around the cord, to adhere contaminants inside to the double-sided tape. Remove the pencil and discard it and the contaminants in the trash.
How to lubricate a can opener?
Place the included plastic straw on the nozzle of the can. Spray a two-second burst of lubrication onto the spool. Rotate the spool counterclockwise with your fingers to loosen the cord. Spray another two-second burst. Replace the panel and reattach the screws . Advertisement.
How to clean a sandpaper can?
Push any cord that is snagged against an inside corner of the compartment away from the side. Remove any dust balls or other contaminants with your fingers that are inside the panel. Shake the can of lubricating spray for five seconds. Place the included plastic straw on the nozzle of the can.
Where does a wire break?
Commonly one of the wires breaks inside the cord insulation where the cord is bent or flexed back an forth a lot where it is plugged into the wall, or attached to the device. The repair job is relatively simple, as you have discovered.
Can you work on energized circuits?
Be Careful and Be Safe - Never Work on Energized Circuits!
Can you trash a vacuum cleaner?
Rick, from the information you have provided, No – don’t trash the vacuum cleaner, the cord can be repaired!

What Causes Damage to A Vacuum Cleaner Power cord?
How to Repair & Fix Vacuum Cleaner Power Cord: A Step by Step Guide
- 1. Inspecting the damaged area:investigate the damaged area of the power cord to access the damage. Thoroughly examine the damaged area to determine whether the defect is at the center, the switch, or the plug. 2. Tape surface damages:if the power cord only has surface damage, tape these areas using electrical tape. The electrical tape is shock sen...
Conclusion
- Generally, vacuum cleaner power cords are prone to damage due to the fact that they are not particularly durable. As a result, if damage occurs, it does not necessitate the purchase of an entirely new vacuum. Simply performing a repair will resolve the situation. Among the most common causes of damage to a vacuum cleaner power cord include cord stretching, split cords…
FAQs
- How do I replace a vacuum cleaner power cord?
Begin by removing the old cord and remembering to unplug the vacuum from a power source. Place the vacuum in such a way that the brush roller on the vacuum’s bottom is visible. Remove the screws that hold the roller in place and pull the brush out after it has been disengaged from it… - How do I replace a vacuum cleaner electrical plug?
Electrical plugs are prone to damage as a result of deterioration and incorrect use. However, regardless of the reason for replacement, always choose the same type as the original, so that the wiring of the cord will work. It only takes a few minutes to replace the plug. Begin by disconnecti…