Repairing Guides

how to repair a wii remote

by Kayden Gerhold Published 3 years ago Updated 2 years ago
image

  • Fixing Wii Remote Not Working. If your Wii remote won't turn on or doesn't respond, try holding the Wii Remote upside-down with the buttons facing downward.
  • Checking Hardware Configuration. To check the hardware configuration, first open your Wii Remote's battery door. ...
  • Resetting Wii Remote Controls. You can also try resetting your Wii's remote control. First, turn off and unplug your Wii gaming system.

Full Answer

How do I Fix my Wii Remote?

What to Do:

  • From the Wii U Menu, press the HOME Button.
  • Tap “Controller Settings.”
  • Tap “Settings” under “Wii Remote/Other Controllers.”
  • Tap “Change Order.”
  • Press the A Button on each Wii Remote starting with Player 1.
  • When you are finished, tap “Exit.”
  • Tap “Back.”
  • Tap “Back” to return to the HOME Menu.

How to reset your Wii Remote?

How to Reset the Wii Remote

  • Flip the Wii Remote over to open the battery cartridge.
  • Open the battery cartridge by pushing the tab at the bottom upward and then outward.
  • Remove the first battery by pressing downward and then outward on the positive end of the battery.The second battery can be removed in the same way.
  • Replace the battery cover.

More items...

How to troubleshoot Wii remotes that are not working?

  • Turn the Wii console on and wait until the "Health & Safety" screen appears (don't press A).
  • Open the SD Card slot cover on the front of the Wii console and press and hold the red SYNC button for 15 seconds. ...
  • Resync the Wii Remote by removing the battery cover and pressing the red 'SYNC' button. ...

More items...

How do you sync Wii Remote?

Method 2 Method 2 of 2: One-Time Mode Download Article

  1. Know the purpose of one-time mode synchronization. This is much different than syncing in the standard mode and is not permanent.
  2. Press the HOME button. Be sure you're using a Wii remote that is synchronized with the Wii console you're currently using.
  3. Select the Wii Remote Settings option from the Home Button menu. ...
  4. Select the Reconnect option. ...

More items...

image

How do I fix an unresponsive Wii Remote?

Open the SD Card slot cover on the front of the Wii console and press and hold the red SYNC button for 15 seconds. This will clear all synced Wii Remotes from the console. Resync the Wii Remote by removing the battery cover and pressing the red 'SYNC' button. Then press the SYNC button on the Wii console.

How do you reset a Wii Remote?

How to Reset the Wii RemoteTake out the batteries, wait for one minute, and then reinsert them (there is no need to use new batteries).Wait a few seconds before pressing any buttons to wake up the Wii Remote.Resync the Wii Remote.

How do you get the Wii Remote to work?

0:292:39How to Use the Nintendo Wii Controller - YouTubeYouTubeStart of suggested clipEnd of suggested clipHere in the center you have your home button your plus your minus button or your minus and your plusMoreHere in the center you have your home button your plus your minus button or your minus and your plus button and then your one and two but primarily most of the functions are handled by the trigger.

Why is my Wii Remote blinking but not turning on?

There can be many reasons as to why the Wii Remote's lights are only flashing but not connecting. The most common cause is that the Wii Remote is no longer synced to the main console. It could have previously been synced but is now not synced for many reasons.

What does 4 flashing lights on Wii Remote mean?

The Wii Remote has four Player LED lights that are used as various indicators: The LED that is illuminated indicates the Player number. Blinking LEDs indicate the Wii Remote is attempting to sync. When the Player LEDs are blinking they will indicate the battery level.

How long does a Wii Remote last?

A fresh set of alkaline batteries should last, depending on amount and type of use, up to 30 hours. This can vary greatly based on certain factors such as Wii Remote Speaker Volume, Rumble, battery quality and age, and the type of game being played.

How to clean Wii remote buttons?

To clean the buttons, you will need a NEW toothbrush, some warm water and a little soap. Remove the batteries from your remote before cleaning your buttons. Slightly dampen the toothbrush with warm soapy water and brush around the sticky buttons. Dry off with a paper towel.

How to calibrate a Wii remote?

To re-calibrate the remote, place it on a table button side down for 10 seconds. Make sure the Wii Remote is orientated parallel with your TV screen. After 10 seconds, point the Wii Remote back at the TV. If this doesn't work, go into the Wii settings at the home screen and make sure that the location of your sensor bar is correct, either below or above your TV.

Why won't my Wii remote turn on?

You have fresh batteries making good connections in the Wii Remote, but the remote still doesn't turn on. The connection between the power button and the motherboard may be dirty and causing the remote not to turn on.

What is the heart of a Wii remote?

The motherboard is the heart of the Wii Remote. The motherboard transmits signals throughout the Wii Remote, which includes the signal to turn on the remote when you press the power button. If gone through all the other steps, your problem could be a broken or burnout motherboard. Use our guide to install a new motherboard.

How long does it take for a Wii remote to work?

After 10 seconds, point the Wii Remote back at the TV. If this doesn't work, go into the Wii settings at the home screen and make sure that the location of your sensor bar is correct, either below or above your TV.

Why does my Wii Tennis remote not swoosh?

This indicates that there is a problem with the internal speakers of your Wii Remote. This is usually caused by dirt and dust getting into the remote. To replace speakers, see our nifty guide for installing a new speaker.

Why is my Wii cursor sporadic?

Make sure that there aren't any lamps placed too close to the sensor bar because the mixed heat signals will cause the sporadic cursor. Also, make sure there are not any infrared lamps in the same room as your Wii for this will also affect the sensor bar.

What is a Wii remote?

The Wii Remote is Nintendo's original motion-sensing controller for the Wii console released on November 19, 2006. The Wii Remote, nicknamed the "Wiimote", is a rectangular controller with a set of buttons on the top, one trigger style button on the bottom, and a screen on one end. It is usually white, however it is also sold in black, pink, blue, and red. The controller includes a set of buttons on the top, a trigger style button on the bottom, and a screen on the end. The model number for the Wii Remote is RVL-003, and is located both under the batteries and beneath the Nunchuk port.

Where is the model number on the Wii Remote?

The model number for the Wii Remote is RVL-003, and is located both under the batteries and beneath the Nunchuk port. The Wii Remote looks very similar to it's successor, the Wii Remote plus, except the original Wii Remote has no text underneath the Wii symbol on the controller.

What color is the Wii Remote Plus?

The Wii Remote is sold primarily in white while the Wii Remote Plus is usually black , but they are both sold in alternative colors. The Wii Remote should not be confused with the Wii Numchuck, the secondary joystick controller that plugs into the Wii Remote.

Step 1 Getting your control

To start dissembling this wii remote, turn it over and take the back off.

Step 2 Unscrewing the screws

Then take the screws out and pry off the back, you should have four screws, 2 from the top and 2 from the bottom.

Step 3 Opening the control

You need to pry off the back (do this carefully) , open it in half it should look like this (second picture). Take the motherboard off slowly and carefully, you should have 3 parts (third picture)

Step 4 Taking out the buttons

From this part of the control take these pieces off carefully. You should have these pieces (second picture). After you should have something that looks like this (third picture). You have successfully disassembled your wii remote.

Step 5 Reassembling the wii remote

This will show you how to reassembling the wii remote if you are having trouble.

How to reset Wii remote control?

First, turn off and unplug your Wii gaming system. Leave the unit unplugged for one minute and then plug the gaming system back in. Turn the Wii system on.

How to fix Wii remote not turning on?

If your Wii remote won't turn on or doesn't respond, try holding the Wii Remote upside-down with the buttons facing downward. Tap the remote firmly against the palm of your hand three times to remove any dust sitting between the buttons and the electronic circuit board inside the remote. Turn the remote upright and press one of the buttons. If the problem continues, you might proceed by checking the hardware configuration.

How to get back to playing Wii games?

To get back to playing your favorite games, you can take some steps to check your hardware configuration, clean the remote and reset the remote control's settings. For additional help or to order a replacement Wii Remote, you can contact Nintendo's customer service department at (800) 255-3700. Advertisement.

Where is the sync button on a Wii remote?

The "SYNC" button is behind the small door on the front of your Wii unit. Release the "SYNC" button. Remove the battery cover and batteries/battery pack from the back of your Wii Remote. Press and release the red button located under the battery compartment. The blue lights on the front of the remote will blink.

Where is the sensor bar on a Wii?

First, check that the Sensor Bar cable is inserted firmly into the back of your Wii gaming system. The Sensor Bar also needs to be centered above or below your television so the Wii Remote can transmit signals to the gaming system.

When did the Wii come out?

Image Credit: jacktheflipper/iStock Editorial/GettyImages. Released way back in 2006, the Nintendo Wii gaming system requires remote controls to navigate the system's menus, control the hardware and play your games. If you've had your Wii a long time, you might find that your Wii remote won't turn on or your Wii remote is not working as it used to.

How to reset Wii remote?

Take the remote button side down, and slap the button side of the remote against the palm of your hand. This doesn't take a lot of force. Reset the Wii Remote. Remove the batteries from the Wii Remote.

How far away from TV should I put Wii remote?

Ensure the Wii Remote is being used between 3 and 10 feet directly in front of the TV. If the Sensor Bar is being used on top of a cable box, satellite box, or other top-box, remove it and place it directly on the top or bottom of the TV. Check for physical damage.

What to do if you have an unlicensed battery?

If you are using an unlicensed accessory, replacing it with a licensed accessory may resolve the issue. Ensure you are using a fresh set of alkaline batteries. Unlicensed rechargeable battery packs, lithium ion, and nickel cadmium (nicad) are not recommended and should be avoided.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9