
How to Fix a Zipper (without Replacing It)
- What You'll Need. You will only need a pair of pliers. ...
- Remove Stopper. Remove the little iron stopper of the top of the zipper, which will be on the same side of the jacket where the zipper puller is.
- Remove Zipper Pull. Remove zipper pull. You can probably see that it is all distorted.
- Adjust the Zipper Pull. With the pliers close the two sides of the zipper pull, try to make it look like the original shape again.
- Put Back the Zipper Pull. Put back the zipper pull. It may take a little bit of time ...
- Put Back the Tooth. Put back the iron tooth with the pliers.
- Done! Faster than changing it! 1 Person Made This Project! AnjO1 made it! Did you make this project? Share it with us!
How to put a zipper back on jacket?
supplies
- Jacket with a broken zipper
- Separating zipper that is the same length and color of the broken zipper
- Sewing tools
- Sewing machine
How to replace a zipper in a jacket or coat?
Replacing a Zipper Slider
- An end nipper tool to remove the old zipper stop
- Needle-nose pliers to crimp the new zipper stop into place
- Zipper slider: Most jackets have a single-slider zipper; if yours has a double slider, then you’ll need two replacement sliders. ...
- Zipper stop: You should only need one, though they're typically sold in packages that include two or more stops.
How to replace a zipper in a hooded jacket?
The following are items where your zipper might only need a little TLC:
- The zipper keeps getting stuck – this might need a little lubrication, so do not tug and force. ...
- The zipper slider works, but once zipped up, the zipper comes apart. ...
- The slider comes off. ...
- The actual pull tab breaks off but the slider is still intact. ...
Can a tailor replace a zipper on a jacket?
The short answer is yes. The correct answer is each case is different. In all cases the zipper can be replaced but you have to keep in mind that that the original zipper that your jacket came with was a specialized zipper, purposemade for best functional results.

Can you fix a broken zipper on a jacket?
1:081:31How to Fix Every Zipper Issue - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can remove a broken slider by snipping it off with a pair of wire cutters a new slider can beMoreYou can remove a broken slider by snipping it off with a pair of wire cutters a new slider can be slid back on the teeth.
Is there a trick to fixing a zipper?
To fix a stuck zipper, start with a graphite pencil. Rub the tip of the pencil along the closed zipper teeth, trying to work the zipper down. Use bar soap or wax. Try using a lubricating substance like a bar of soap, some chapstick, or lip balm to make the teeth easier to slide through.
How do you fix a zipper slider on a jacket?
2:283:37How to Fix a Broken Zipper Slider ... Many ways! - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst i'm grabbing my cutting pliers and i'm squeezing the stopper at the top of the zipper. So iMoreFirst i'm grabbing my cutting pliers and i'm squeezing the stopper at the top of the zipper. So i can slide it off next i'm removing the old slider.
How do you fix a zipper that is off track?
8:429:52How to Fix a Zipper On One Side of the Track (Chain) - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust again to go over the steps. You're going to open up the slider mouth a little bit using someMoreJust again to go over the steps. You're going to open up the slider mouth a little bit using some pliers basically you're gonna just use this opening and pry the slider open once the cider is open you
How do you put a zipper back on a jacket with a fork?
3:186:11Fork Trick to Put Zipper Heads On Zipper Yardage - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I can jiggle it on and I'm done but if you really want to use a fork. All you do is is you put aMoreSo I can jiggle it on and I'm done but if you really want to use a fork. All you do is is you put a tine on either side of the bridge. Like that make it so nice to found all the way.
How do you fix a separated zipper on one side?
1:174:00How to Fix a Zipper That's Come Off One Side of the Track - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you want to gently on the back butt end of the zipper. Here clamp this down lightly with pliers.MoreAnd you want to gently on the back butt end of the zipper. Here clamp this down lightly with pliers. Because it needs that pressure in order to zip the two sides of the track.
How do you put a zipper slider back on track?
2:455:45How to Fix a Zipper and Put a Slider on to Zipper Chain - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce it engages on the teeth. You've been able to put the slider back onto the zipper tape. Now.MoreOnce it engages on the teeth. You've been able to put the slider back onto the zipper tape. Now. That's the one way of fixing it which is usually the easy way when both sides are joined. Together.
Where should the zipper prongs be on a jacket?
The single prong should be on the outside of the coil, while the double prongs are closest to the rest of the jacket . Once pressed through the zipper tape and between the coil, fold each prong down and press firmly with the pliers. 5. Wear it out! If you want, add a pull tab and your zipper is good as new!
How many zippers do we repair a year?
Zippers are on just about everything and over time they wear out. At Rugged Thread, we repair about 200 zippers a year on jackets, tents, sleeping bags, pants, motorcycle gear and even things like Jeep Soft Top covers and camper trailers. Often, you just need a new slider, which is an easy DIY fix, rather than a full zipper replacement.
How to remove top stop from jacket?
Remove top stop. Unzip the jacket fully, and remove the top stop only on the side of the zipper that has the slider on it. If you have a plastic top stop, use the flush cutters to clip off, otherwise, use the needle nose pliers to gently remove a metal top stop. Leave the teeth and surrounding fabric intact.
How to find the correct slider?
Finding the Correct Slider. In order to identify the correct slider, you first need to know what kind of zipper you’re working with. The three main types are Nylon Coil, Vislon (also known as Molded Tooth) and Metal zippers. On the back of each slider, there should be a couple letters and numbers.
How to stop a slider from popping off the top?
If you have a top stop like the one pictured, you have a couple options: a) Using a lighter, slightly melt the back side of the plastic and press with the butt of the lighter to form a lip. This will prevent the slider from popping off the top.
Can you replace sliders on jackets?
Replacing the slider on a jacket is easy to do as long as you have the correct materials and tools. The trick is identifying what slider you need because there are a variety of different sizes, styles and brands, not all of which are compatible.
Repair Your Zipper
Sometimes, a zipper seems broken when it is merely in need of a simple repair. You may just need a pair of pliers to pinch the tabs back onto the track. This is typically the case if your zipper is separating. Use your pliers to pinch down on both sides of the pull until the tab runs smoothly on the track without separating.
Replace Your Zipper
If you have a broken zipper on an older coat, the pull might be stuck due to missing or broken zipper teeth or something caught in it. You used to need zipper repair parts, which involved finding the right size zipper pull tab replacement and sewing in a whole new zipper.
Can you close a zipper that is too worn out?
If your zipper pull is not too worn out you can try to close it directly on the zipper, without removing it. (if it is made out of plastic, if it is too bent or if it breaks doing this, you need to find another one of the same size, they are available online, or you can take it from another old zipper). Ask Question.
Do you need pliers for zipper pulls?
You will only need a pair of pliers.#N#But if the zipper pull is really destroyed or is made of plastic you will need a NEW ONE OF THE SAME SIZE. YOU CAN FIND IT IN ANOTHER OLD JACKET. Or you can buy one online for really cheap.
Can I replace a zipper without replacing it?
This is a easy way to fix a zipper without replacing it. This method is really fast too. It works when the zipper pull doesn't close the zipper together anymore. I don't really like to replace zippers, because they always come out a little bit wavy when I do it myself. You can save a jacket, a tent, a sleeping bag, and many other items.
How to repair zipper slider?
There are three gaps in the zipper slider which you can adjust for fixing this problem. Side gaps on either side of the slider have to be narrowed with the plier. Then the up and down position has to be narrowed.
What to do if zipper pull tab is broken?
A Pull is not absolutely necessary to close the zipper but it makes it easy to close. If the pull is broken you can replace the whole slider with the pull, ofcourse .
What is the stitch on the bottom of a zipper called?
If your zipper do not have the metal stoppers, or you do not want to reattach it, you may have to use the hand sewing needle and thread to make stopping stitches at the bottom of the zippers – basically a bar tacking stitch across the zipper teeth. The sliders are called sliders for a reason.
How does a zipper work?
The zipper has two sides with teeth and both have to be in perfect alignment for it to work properly. When you pull up the pull tab of a zipper, the slider is moved over the teeth, and the teeth on either side of the zipper interlock and creates the continuous chain.
What to do if zipper comes down too soon?
If the zipper still comes down all too soon, Use the easy quick fix of tying the pull tab to the pant button with a small ring or a plastic band. Easy quick fix idea.
How to shorten a zipper?
If you want to shorten the zipper to a length you want the process is simple – Cut the zipper to the length you want from the bottom. This will cut off the stoppers as well. Now you need to remove the metal stoppers from the cut off piece with the plier and attach it where you want it.
How to put teeth on zipper?
You can keep masking tape on the side edges (not touching the teeth at all) as pulling tabs. First get one edge up the slider. After this do the other side of the slider.