As with any precision product, your ambassadeur reel will require regular maintenance. Gently rinse the reel with fresh water, wipe it dry and periodically lubricate according to the accompanying diagram (picture of oil and grease points). At least once a season your reel should be disassembled for a thorough cleaning and re-lubrication. Refer to the exploded parts view supplied with your reel. Reel maintenance kits can be purchased at your local tackle store and include everything you need to properly service your reel. If you do not wish to perform this work yourself any nearby Abu Garcia Service Center is fully qualified to do this for you.
Why choose Abu Garcia Ambassadeur fishing reels?
The Abu Garcia Ambassadeur fishing reels can cast a mile, as well as haul in monster catfish and they’ll stand up to decades of use and abuse and keep on performing. Keeping your fishing reels clean and well lubricated assures optimum performance.
Where can I get a fishing reel repaired?
Professional Fishing Reel Repair from Fishing Reel Repair Company. The leader in fishing reel repair and fishing reel service specializing in repair and tuning for Shimano, Daiwa, and Abu Garcia reels. We are the premier source for upgrading reels and super-tuning for optimum performance. We stock parts for quick turn around.
How do I return an old fishing rod?
Your contact information (daytime phone number along with your full name and physical address for UPS return delivery - we cannot return to a Post Office Box). There is a $9.95 shipping and processing fee per rod when replacing rods older than 30 days; however, this is determined on a case to case basis.
Will Abu Garcia replace a broken reel?
For the period indicated, Abu Garcia will, at its option, repair or replace and return the covered items found to be defective in material or workmanship at no charge except for shipping cost.
How do you take apart an Abu Garcia reel?
8:1125:31How to dissassemble reassemble a Abu Garcia Black Max reel - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I must start by removing the c-clip here. And I'm gonna utilize the flathead screwdriver to helpMoreSo I must start by removing the c-clip here. And I'm gonna utilize the flathead screwdriver to help assist me do that.
Where is the model number on an Abu Garcia reel?
Photograph of the model number (located above the handle/opposite side rod)
How do you disassemble Abu Garcia baitcaster?
9:3219:02How to Disassemble and Clean a Baitcaster for Beginners (Part 1)YouTubeStart of suggested clipEnd of suggested clipHold it with your thumb nail on one side and push gently with a Philips screwdriver. Again makingMoreHold it with your thumb nail on one side and push gently with a Philips screwdriver. Again making sure you don't shoot it halfway across the room like that. A little plastic piece here that comes.
How do you service a baitcaster reel?
Clean any visible dirt and debris from exterior of reel with cotton swabs or toothbrush and isopropyl rubbing alcohol. Dirt, debris, salt or sand leads to wear and tear. Clean the inside of pinion gear with a cotton swab for optimal freespool and casting performance.
How do you rebuild a baitcaster?
2:4621:15How to Disassemble, Clean, and Repair a Baitcaster Fishing ReelYouTubeStart of suggested clipEnd of suggested clipThere's a simple pin that you unthread or unscrew. And it kind of pops out there's a spring thatMoreThere's a simple pin that you unthread or unscrew. And it kind of pops out there's a spring that holds it in so that piece doesn't pop out. And then you simply turn the pot does the side plate.
How do you date an Abu reel?
This can be noted by opening the cover page of a Garcia Fishing Annual. The date is located at the bottom right hand corner of the first page and it will precede the year found on the magazines spine. A reel purchased sometime during the Summer of 1972 could have old stock parts from 1971 assembled to it.
How can I tell what series my reel is?
Start by taking a look at the side plates of the reel, as on most of the older conventionals that is where the model information is located. Some models have a cross bar with the model number, and in newer reels, a housing frame that is labeled.
Which Abu Garcia reels are made in Sweden?
Abu Garcia For Life In 2014, Abu Garcia will re-launch its iconic Swedish made round reels with newly updated editions of its original Record, C4, C3, Pro Rocket and Morrum Swedish-made round reels.
How do you disassemble a fishing reel?
1:478:40How to clean and maintain a fishing reel- Taking apart and ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst thing you're gonna do is loosen up your drag cap on the top of your spool. Okay so now onceMoreFirst thing you're gonna do is loosen up your drag cap on the top of your spool. Okay so now once the cap comes off I'll set this out of the way in my work area.
How do you oil a Abu Garcia reel?
2:0415:59How to Oil and Lube a Baitcasting Reel - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's real easy it's just this screw right here some of mine I have really tight so I'm gonna haveMoreIt's real easy it's just this screw right here some of mine I have really tight so I'm gonna have finger tight. So you just removed that side plate. And remove the spool.
How do you disassemble Abu Garcia Revo SX?
1:5944:25How To CLEAN A Baitcasting Reel - Abu Garcia Revo (In Depth)YouTubeStart of suggested clipEnd of suggested clipIt's very easy just take all the different screw screws off in their different spots. And then we'llMoreIt's very easy just take all the different screw screws off in their different spots. And then we'll get into the different components of the reel. Start by taking the side plate. Off.
How do you remove Abu Garcia handle?
3:248:15How to install a power handle on an Abu Garcia 6500C3 fishing reel.YouTubeStart of suggested clipEnd of suggested clipYou'll lose it. So right now you would take that off otherwise you can't get this handle off so onceMoreYou'll lose it. So right now you would take that off otherwise you can't get this handle off so once you take that clip. Off slide the old handle.
How do you oil a Abu Garcia spinning reel?
0:514:49How to Properly Oil Spinning Reel - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd open up your oil and insert one drop. Right into the knob right here because there's a bearingMoreAnd open up your oil and insert one drop. Right into the knob right here because there's a bearing right there just one drop is all you need.
How do you oil a Abu Garcia reel?
2:0415:59How to Oil and Lube a Baitcasting Reel - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's real easy it's just this screw right here some of mine I have really tight so I'm gonna haveMoreIt's real easy it's just this screw right here some of mine I have really tight so I'm gonna have finger tight. So you just removed that side plate. And remove the spool.
Howtoseyupaspincastingreel
use 10# test line or heavier. use 3\8 oz lure or heavier. set magnetic control to "5". tighten small silver knob under the reel handle down until the spool will not turn when you push the thumb bar.
Poor casting ability
Remove the left side plate and set the little plastic things ( I think they are yellow) so they are against the inside..they should kinda snap inwards and stay there... Found a video ( not well made but it shows how to access the brake system).. you will see the SIX little yellow plastic brake adjusters...
Abu garcia silver max reel manual
those are your magnetic cast control. it is a magnetic braking system. i suggest setting it at "5" and dont adjust unless you are casting into the wind, if that is the case turn it up to towards maximum and keep your casts low to the water and use heavy baits. its a great tool to help eliminate backlash.
Handle for orra s30
I need a handle to reel Abu Garcia Orra S30. You can tell you where to buy it?
5 Best Spinning Reels for Catfishing - Buyers Guide - Slo-fishing
and more https://www.google.com/search?q=Shimano+spinning+reels+are+best+for+catching+catfish ..
Hello! How can I change the reel crank OKUMA AVENTA BAITFEEDER 6000 from left to right? Thanks
there should be a little dust cap on the left side of the reel. unscrew that, pop the crank out, and switch the sides, ending with putting the dust cap back on the right side.
How to remove the sideplate on a Quantum BU670CX bait casting reel
Request an assembly drawing from Quantum and follow it in reverse to remove the sideplate.
What to use to clean Abu pawl cover?
To clean the parts you can use Simple Green or Oxy Clean. Be careful not to get any overspray on to your line, unless your cleaning agent is biodegradable.
Why put a fishing reel back together?
This comes in handy when putting the reel back together because it keeps your loose line from getting caught between the spool and the frame. If it’s time to change out your fishing line then go ahead and remove it. Here’s an awesome DIY fishing line stripper you can build for pennies.
How to remove a spool from a frame?
Start by removing the 3 thumbscrews on the right faceplate. Use a flat-tip screwdriver, if the screws are too tight. The right faceplate assembly will come off the frame and the spool will come off the spool axle.
How to clean a cogwheel?
Clean out the faceplate of any dirt and debris. Check the teeth on the cogwheel to ensure that the gear isn’t stripped. Apply the grease/lube along with both sets of teeth on the cogwheel. I put one drop of oil in the axle seat (hole in the faceplate) and one on the cogwheel spindle. You can set this faceplate aside because that’s all there is to that piece.
What is the best bait cast reel for catfish?
Abu Garcia Ambassadeur bait cast fishing reels are loved by catfish anglers all across the United States and are hands down the most popular fishing reels for catfish.
How to put oil on worm gear?
On the worm gear itself, put one drop of oil on the tip and one drop on the white collar just below the gear. Slide the worm gear into the worm gear cover. When sliding the assembly back into the frame, remember that the worm gear is tabbed, so it will flush into the frame when seated correctly. If the plastic sleeve fell out of the worm gear cover, make sure it’s oriented correctly. If you have problems seating the assembly, usually, it’s because the sleeve is backward.
What is a C clip on a reel?
Here, you will see a small C-clip. Be VERY careful with this clip. I’ve lost way too many, so I keep spares handy. This C-clip not only keeps your handle nut from getting loose but it keeps your handle gear shaft tight and down to align your gears inside the faceplate (just some FYI). If you lose this, it isn’t the end of the world, but you could notice some skipping issues with your reel. Not a fun time.
Professional Reel Repair
With over 40 years of combined experience, Anglers Paradise Reel Repair has the knowledge and skill needed to fix or maintain your reel right the first time. We service most major brands and even some obscure and vintage reels. Below is a list of some of the brands we commonly work on.
How to get service
At Anglers Paradise Reel Repair we make it easy to get your reel maintained or repaired. We have have two convenient options for you:
Introduction
This guide will show you step by step, how to clean the gears of a bait caster. This will allow you to cast at the distance you are needing.
Step 1 Step 1
Use a small Phillips or flathead screwdriver to remove the screw highlighted in red.
Step 2 Step 2
Remove 10MM nut, highlighted in orange, on handle with a 10MM nut driver.
Step 4 Step 4
Using a small Phillips or flathead screwdriver, remove the small screws that are highlighted in red.
Step 5 Step 5
After small screws are removed, twist each knob until they come off being careful not to loose these pieces.
Step 6 Step 6
Once cover is released from reel, apply the Abu Garcia lube to the gears highlighted in orange.
