How to Repair Accordion Shutters
- Getting Started: Disengaging & Cleaning Accordion Shutters. Get started by properly cleaning the shutters. ...
- Remove Internal Debris. Check the locking system of the accordion shutters. ...
- Lubricate Jammed Parts. Use a dry cloth to clean the slat pegs and wheels. ...
- Replace Loosened Fasteners. ...
- Surface Repairs. ...
Full Answer
Are your accordion shutters off the track?
That last big storm may have left a few dents in your hurricane shutters. Or maybe your Accordion shutters are off the track. Whatever the case, damaged or broken hurricane treatments aren’t providing your family or business with the protection you paid for and need this storm season.
How long does it take to install accordion shutters?
The average preparation time is 15 to 30 minutes for the entire house. Not all Accordion Shutters Systems are made the same. The Maximum Impact® Accordion Shutters are stronger than other Accordion shutters.
What are Maximum Impact® accordion shutters made of?
The Maximum Impact® Accordion Shutters are stronger than other Accordion shutters. They are fabricated of high strength, thicker extruded aluminum alloy. The enamel finish is baked on at 450 degrees to assure a lasting finish.
How do you repair an accordion?
Button clunks on the way up *Replace bass valve facing The most commonly needed repair is changing reed leathers. A standard 120/41 LMMH accordion has about 380 leathers in it, and given enough time they will all eventually need replacing.
How do you service accordion shutters?
How to Maintain Your Accordion Hurricane ShuttersKeep the tracks clean. It's important to keep the tracks of the shutters clean by washing them regularly. ... Lubricate the tracks at least twice a year. ... Wash with soap and warm water. ... Operate your shutters at least once a month.
How do you fix a roll down hurricane shutter?
0:428:20Roll Up Hurricane Storm Shutter Repair (Rolladen) - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first thing I'm going to do is remove. The cover along the top all the way down and there are aMoreThe first thing I'm going to do is remove. The cover along the top all the way down and there are a bunch of rusty screws. That are very corroded due to many years of high humidity and salt spray.
What is the best lubricant for accordion shutters?
silicone based lubricantThe best lubricant for accordion shutters is a silicone based lubricant. Avoid any oily, petroleum based spray as this will make it worse as it collects and builds up dirt over time. Using a dry silicone based lubricant spray can help reduce this buildup.
How do you open accordion hurricane shutters?
0:031:13Push Lock Demonstration for Hurricane Accordion ShuttersYouTubeStart of suggested clipEnd of suggested clipAlright guys so this right here is our HV push lock this is the most common lock that we use on allMoreAlright guys so this right here is our HV push lock this is the most common lock that we use on all of our shutter systems it's pretty straightforward as you can see you push and it locks.
How do you fix a broken roller shutter?
A solution to this issue is to spray the components of your roller shutter with a lubricant, such as WD-40. The WD-40 will loosen up the mechanisms, allowing them to move smoothly. Open up the box at the top of your slats and you should be able to investigate further.
How do you replace roller shutter cable?
2:293:54Replacing the cord of a roller shutter - YouTubeYouTubeStart of suggested clipEnd of suggested clipUnscrew the roller holder which is at the lower end of the belt and remove the old. Belt. ThenMoreUnscrew the roller holder which is at the lower end of the belt and remove the old. Belt. Then rewind the small role in the opposite direction to the winding of the shutter.
How do you clean the inside of hurricane shutters?
Slide your hurricane shutters across the window and wash the metal panels with warm water, soap, and a soft bristle brush. Do not use harsh or abrasive cleaners, hard bristles, or abrasive pads. These can scratch and damage your shutters.
Do accordion shutters need to be locked?
You can operate your accordion shutters without locking them. The reason manufacturers include locks is so that homeowners who evacuate during a hurricane can ensure home security.
How do you lubricate accordion storm shutters?
0:393:44How to Maintain Accordion Hurricane Shutters - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I'm going to run through a quick maintenance process that will save you time and money and yourMoreSo I'm going to run through a quick maintenance process that will save you time and money and your shutters will stay new for years to come let's go to come in the open position the first thing youHow to Maintain Accordion Hurricane Shutters - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watch
How much are accordion storm shutters?
Accordion Shutters Cost: approximately $20 – $25/sqft They are permanently installed, and they can be locked from inside or outside your home. They move along a permanently installed track system making them easy to open and close.Hurricane Shutters Cost: 2022 Pricing Guidehttps://eurexshutters.com › hurricane-shutters-costhttps://eurexshutters.com › hurricane-shutters-cost
Can you close hurricane shutters from the inside?
Storm Panels are simple and effective hurricane shutters. They are most often secured outside but can be designed for inside closure for sliding glass doors and windows in some situations.Introduction to Storm Shutters | Storm & Security Products | Hurricane ...https://www.stormshutters.com › introduction-to-storm-sh...https://www.stormshutters.com › introduction-to-storm-sh...
How do you manually open the roller shutters from the outside?
0:592:57Using an external manual override - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the bar and the hex bar insert the hex bar and locate it into the gearbox. Once you have done soMoreAnd the bar and the hex bar insert the hex bar and locate it into the gearbox. Once you have done so to open the door with the external you must turn it anti-clockwise.
How much do roll down hurricane shutters cost?
Roll-up or roll-down hurricane shutters cost Roll-down hurricane shutters cost $25 to $120 per square foot or $175 to $840 per window on average. Manual roll-up shutters cost $20 to $50 per square foot. Electric roll-down hurricane shutters cost $50 to $175 per square foot. *Includes installation.
Providing Accordion Hurricane Shutter Repair Whether We Installed Them or Not
Some hurricane shutter companies will repair only the shutters they installed. At Storm Guard Solutions we will repair any system, whether we installed it or not. As a result, we have experience with many different makes and models. Additionally, if another company has told you to replace your shutters instead of repairing them, give us a call.
What can You do to Ensure your Accordion Shutters Continue to Work Properly?
It is important to have your shutters checked annually to ensure they are in working order, even if they did not get used. With this in mind, make sure you check and maintain your accordion shutters by completing the following:
Have the Best Accordion Shutter Repair Company on Your Side
Storm Guard Solutions has been serving Collier and Lee counties for over two generations and understands what it takes to get the job done right the first time. Additionally, when you choose us to repair your accordion shutters, you can rest assured knowing that are receiving the best service and workmanship for your investment.
How to clean rusty shutters?
If your hurricane shutters haven’t been opened in a while, it’s possible mildew or other grime collected around your joints or hardware and is the source of your problem. Using a rag with mild soap and water, clean your shutters and hardware thoroughly. Even rust can sometimes be eliminated with a rust removing solution, however, aged hardware should absolutely be replaced with storm tested and hurricane compliant fixtures, as these keep your window treatments structurally secured.
How to contact hurricane shutters?
Explore our hurricane shutter services page or give us a call at (239) 288-0232 to get the courteous and timely help you need today.
Why do Florida homeowners use motorized window treatments?
Oftentimes Florida homeowners choose motorized window treatments to make opening and closing their storm protection easier than ever . Roll down shutters, for example, can be heavy and tedious to lift and are great treatments to motorized.
What to do if a hurricane rolls through?
If a hurricane just rolled through and you know some damage has been done, inspect them once the storm has safely passed. Most storm shutters have been specifically engineered to withstand most hurricane categories, and have been tested under rigorously simulations, like hurling bricks at them at insane speeds!
What happens if hurricane shutters are damaged?
When your hurricane shutters are damaged, you put your family or business at risk not repairing or replacing them. In SWFL, storms can roll through rather unexpectedly and quickly, and it’s imperative that you take action, fast.
Do motorized shutters need maintenance?
If you have motorized shutters the importance of maintenance increases, as motors can corrode, parts can become loose and more. Read more about caring for your shutter’s motor here.
Can hurricane shutters be repaired?
Not all shutter repairs are DIY projects. Sometimes you need to trust a set of professional hands to ensure your hurricane shutters are properly fixed or replaced.
How to separate the bass from the accordion?
To separate the bellows from the bass side of these accordions, first remove the bass cover, then release the two thumb clips and remove the bass machine and bass button board as an assembly, and finally, remove the five screws that fasten the bass cabinet to the bellows.
Where are the bellows pins on an accordion?
Once that is done, locate and count the bellows pins on the treble side of the bellows. There will usually be three or four on the back and three or four on the front, but there may also be one on the top and one on the bottom. Avoid marring the pins or the plastic finish on the accordion when you pull the pins.
What to do if you push too hard on a shoulder strap?
Make sure you have the best fit for all pins before forcing any pin into any hole. Finally, reinstall any bellows strap screws you may have removed, and put on the shoulder straps and back pad.
What are accordions made of?
Some accordions are now made with plastic reed valves (ventilli) rather than the more traditional leather. Is this an improvement in accordion quality and performance, or just a cheaper way to build an accordion?
How many bellows pins are there on a bass reed?
For better access to the bass reed blocks, remove the bellows from the bass section as well, but not before noting how it goes back together. If there are four bellows pins on the front of the bass section and three on the back, then it will be obvious which way the bellows goes back on.
When should leathers close?
Leathers should close under their own power whenever they are not forced open by air coming through the reed vent behind them. When the bellows is expanding (bass section moving outward), the reed tongues on the inside of the reed block are in use, as air is drawn into the accordion through any open note valves.
What is a bass button?
Bass terminology: The button is on the end of a piston which has pegs or tabs that engage levers on bellcranks (also called cams or pipes). When pushed by the peg on the side of a piston, a lever rotates the bellcrank to which it is mounted. The rotating bellcrank has another lever on it (the actual cam) which engages the lifting arm on the valve, o pening the valve as the bellcrank rotates. Remedies marked with * require totally removing (and in most cases this means disassembling) the bass machine for access.
What type of shutters are used for hurricanes?
ACCORDION SHUTTERS offer you the ultimate value in hurricane protection. When you consider cost and ease of use, it is no wonder accordion shutters are the most popular type of hurricane shutters. This type of shutter stacks besides the opening when not in use and unfolds accordion style to cover and protect during a storm.
What is maximum impact shutter?
The Maximum Impact® Accordion Shutters are the choice for property owners who want the highest degree of protection available. Operated from inside or outside, they are perfect for window and door openings on high rise buildings or large spans areas where the strongest possible protection is desired.
What is assembly hardware made of?
Assembly hardware is made of stainless steel and other corrosive resistant materials for an extended lifetime. In addition, nylon wheels, stainless steel wheel carriages, and heavy hinged knuckles add extra strength and durability. Not satisfied in just meeting the building codes, we went beyond them.
