how to repair airpod microphone

Full Answer

How do I Fix my AirPods microphone audio not working?

Next, press and hold the setup button on the back until you see an amber light followed by a white light. Then, re-pair the AirPods and test: Get help with your AirPods. If you find the microphone audio is still breaking up, your best bet is to get in touch with Apple using this link to look at your options: Contact Apple Support.

How to clean your AirPods?

Try cleaning them out. Spray a cotton swab with rubbing alcohol—don't get it too wet—and dab away on the microphone holes to the bottom of the AirPods to loosen any gunk. Then, pry out the particles with a toothpick or a pair of tweezers. When doing this, take extra care not to damage the mesh grill covering the microphones.

How do I reconnect My AirPods to my Device?

Reconnect your AirPods by placing them close to your device and opening the lid. Follow the steps on your device's screen. Test both AirPods. If necessary, check the microphone and speaker meshes on each AirPod.

What do I do if my left or right AirPod isn't working?

If your left or right AirPod isn't working. First, place both AirPods in your charging case and make sure that both AirPods are charging . Learn what to do if your AirPods or case won't charge. Then, if an AirPod still isn't working, follow these steps to reset your AirPods:

Why isn't my microphone working on my AirPods?

Check the Active Microphone Settings Go to Settings > Bluetooth and tap the Info icon next to your AirPods. Then, tap Microphone and enable the Automatically Switch AirPods option to let your AirPods determine the most suitable microphone to use on the fly.

How do I fix my Airpod Pro microphone?

"Forgetting" and re-pairing your AirPods can fix Bluetooth issues.Place your AirPods or AirPods Pro into their charging case and close the lid.Wait 30 seconds and then open the lid. ... Open the Settings app on your iPhone or iPad.Tap Bluetooth.Tap the "i" in a circle next to your AirPods.More items...

How do I test my AirPods microphone?

iPhoneFrom a Home screen, navigate: Utilities. Voice Memos. .Tap. record. .Speak into the microphone.Tap. play. to listen to the recording. You can also attempt a Facetime call or use Siri to test the audio.

Why is my AirPod mic so low?

To test if it's an issue with the physical hardware on one ear piece, with the AirPods connected to your device and out of their case, go to Settings > Bluetooth. Find your AirPods and tap the "i" next to it. Then go to "Microphone" and change to "Always Left" or "Always Right". Record a voice memo with each setting.

Where is the AirPods MIC located?

You might not know this, but AirPods have two microphones. One on the end of the stem and one inside the earpiece. The microphone on the end of the stem is used mainly for making calls or using Siri. It records your voice as it's pointed towards your mouth.

Why does my mic not work?

Go to the sound settings of your device and check if your call volume or media volume is very low or mute. If this is the case, then simply increase the call volume and media volume of your device. As mentioned earlier, dirt particles can accumulate and easily clog the microphone of your device.

Why do my AirPods Pro sound muffled when I talk?

The most common reason why AirPods sound muffled is dirty speaker grilles. Apple's wireless earbuds rest inside the ear canal, where earwax and other debris can accumulate over time. These factors can affect sound quality.

Do AirPods Pro have a microphone?

The AirPods Pro has two tiny microphones both on the inside and on the outside, and they work in the same way that all active noise cancelling headphones do.

How to clean airpod mic holes?

Try cleaning them out. Spray a cotton swab with rubbing alcohol—don 't get it too wet—and dab away on the microphone holes to the bottom of the AirPods to loosen any gunk. Then, pry out the particles with a toothpick or a pair ...

How to reset AirPods Max?

Then, press and hold the Status button on the charging case (or both the Noise Control button and the Digital Crown on the AirPods Max) until the status indicator turns amber. And that's it—you've reset them.

Why won't my AirPods pick up my voice?

Several reasons—such as dirt inside the microphone holes, incorrectly configured settings, and minor bugs or glitches —can stop them from working correctly. If your voice sounds unclear or your AirPods don't pick it up at all, the list of tips below should help you fix any microphone issues with Apple's wireless earbuds. 1.

What happens if you drop your AirPods?

If you have a habit of dropping your AirPods, you may have also ended up damaging the microphones.

How to power down iPhone 6?

Start by holding down the Volume Down and Side buttons together for a couple of seconds (or just hold the Side button on iPhones with a Home button). Then, drag the Power icon to the right to power down the device. Wait for 30 seconds before holding down the Side button again to boot it back up. 6.

Can you use two microphones on AirPods?

If you can only use the microphone on a single AirPod, it's possible this is down to your settings. Check the active microphone setting for your AirPods to determine if it's configured to use both mics.

Why My AirPods Microphone Is Not Working

When your AirPods are low on battery, they’re going to struggle to perform like they would when fully charged.

What to Do When Your AirPods Mic Stops Working

This should be the first thing you do, if you can, to fix the mic issue with your AirPods.

Conclusion

A non-working microphone on a set of AirPods makes for a very poor Zoom, Facetime, or phone experience. Fortunately, there are a number of ways you can get your AirPods mic back online!

Where are the microphones on AirPods?

You can find the microphones at the end of the AirPods' stems. If they appear dirty, you can quickly clean them out by following these instructions for how to clean your AirPods safely. Once you've cleaned the microphone holes, you can wipe away any remaining grime.

How to reset AirPods?

6. Reset & Reconnect Your AirPods 1 Put your AirPods in their charging case, close the lid, and leave them there for 30 seconds. 2 Open the charging case, but leave your AirPods inside. 3 On your iPhone, go to Settings and tap Bluetooth. 4 Tap the info icon next to AirPods. 5 Tap Forget This Device. 6 Confirm Forget Device. 7 Confirm Forget Device again. 8 Keeping the lid of your AirPods' charging case open, press and hold the setup button on the back of the charging case until the status light flashes amber, then white. 9 With the lid open, hold your charging case near your iPhone. 10 A "Not Your AirPods" notification should pop up on your screen. Tap Connect. 11 Follow the instructions on-screen. 12 When your AirPods are reconnected to your iPhone, tap Done.

How to reset AirPods before reconnecting?

One last thing to try before throwing the towel in is to reset your AirPods before reconnecting them to a device. Put your AirPods in their charging case, close the lid, and leave them there for 30 seconds. Open the charging case, but leave your AirPods inside. On your iPhone, go to Settings and tap Bluetooth.

Why is my mic not working on my AirPods?

Sometimes the best solutions are the simplest: your AirPods mic not working may just be a consequence of the AirPods not being charged. Before you do anything else, open up your AirPods case while holding it close to your iPhone and check the charge. If the battery level is low, it may interrupt the microphone's functioning.

Can you use the mic on one AirPod?

If you are having trouble with the microphone on only one AirPod (for instance, the microphone on your left AirPod works fine, but you can't use the mic on your right AirPod), the problem may be found in the AirPods' settings.