Repairing Guides

how to repair airpods to macbook

by Maynard Adams Published 2 years ago Updated 2 years ago
image

  1. Open a support ticket for your AirPods on Apple's website.
  2. Choose the Bring in for Repair option to find a local Apple Store or Authorized Service Provider to replace the affected AirPod. You can alternatively choose to Talk to Apple Support Now, and mail in your malfunctioning pieces for analysis and replacement. ...

Close the lid, wait 15 seconds, then open the lid. Press and hold the setup button on the charging case for up to 10 seconds. The status light should flash white, which means that your AirPods are ready to connect. Hold the charging case, with your AirPods inside and the lid open, next to your Mac.May 18, 2022

Full Answer

How to troubleshoot common problems with Apple AirPods?

Top 6 Common Apple Airpods Problems and Their Fixes

  • General Troubleshooting. Before finding out the specific issue with your AirPods, try resetting them by turning them on and off again.
  • You Can Find Your AirPods If They Are Missing. ...
  • AirPods Battery Life and Charging Problems. ...
  • Pairing and Connection Problems. ...
  • Automatic Ear Detection Failure. ...
  • Intermittent Call Drops. ...
  • Don’t Stop the Music. ...

How to make Apple AirPods *louder*?

How to make AirPods louder: Use Siri. 1. During playback, say “Hey Siri” followed by one of these commands: “Increase volume” will raise the volume by 12%. “Raise volume by 20%” will ...

How to check if AirPods are still under warranty?

How do I know if my Airpod has warranty?

  • Check to see if your device is protected by an AppleCare subscription or by Apple’s Limited Warranty before purchasing. Visit checkcoverage.apple.com to see whether your device is covered.
  • Enter the device’s serial number in the appropriate field.
  • Follow the on-screen prompts to complete the task.

Why are my AirPods not working?

One AirPod’s battery is dead, which is the simplest and most likely cause. Because AirPods consume batteries at different rates, even if they are charged at the same time, one of them may run out of power first. Check the battery life of your AirPods or your battery widget to see whether you need to charge them.

image

What are the service options for my AirPods?

Carry-in repair. Take your AirPods to an Apple Store or an Apple Authorized Service Provider. You’ll need your serial number, so be sure to bring...

How long will my AirPods service take?

You should receive your replacement AirPods or Charging Case within a week. Check the status of your service request

How much does it cost to repair or replace my AirPods?

If you need service for your AirPods or Charging Case, there's no charge if the issue is covered under the Apple One Year Limited Warranty, AppleCa...

AirPods and AppleCare+

AppleCare+ gives you expert technical support and hardware coverage from Apple, including accidental damage protection. Each incident of accidental...

1. Make Sure AirPods Are Sufficiently Charged

As mentioned above, the problem of AirPods not connecting to Mac might be simply due to AirPods being out of power. If this is the case, make sure AirPods are sufficiently charged, before connecting them to MacBook.

2. Restart MacBook

Sometimes, the problem is due to stuck programs and processes interfering with proper functioning of Audio devices on your MacBook. This can be easily fixed by Restarting the MacBook.

3. Make Sure Bluetooth is Turned ON

Click on Bluetooth Icon located in the top-menu bar (top-right corner) and switch on Bluetooth (if it is OFF).

4. Install Updates on Mac

Certain features on MacBook can get stuck or temporarily stop working, whenever there is an Update waiting to be installed on the computer.

6. Manually Connect AirPods to Mac

Click on Apple Logo in top menu-bar > System Preferences > Bluetooth > click on the Connect button, located next to your AirPods.

7. Select AirPods as Output Device

Another common reason for AirPods not connecting or not working on Mac is due to AirPods not being selected as the output device on your MacBook.

8. Remove AirPods & Reconnect

Click on Apple Logo in top-menu bar > System Preferences > Bluetooth > On the next screen, right-click on AirPods and select the Remove option.

How to replace an AirPod?

Choose the Bring in for Repair option to find a local Apple Store or Authorized Service Provider to replace the affected AirPod. You can alternatively choose to Talk to Apple Support Now, and mail in your malfunctioning pieces for analysis and replacement.

What to do if you accidentally misplaced your AirPods?

Thankfully, if you've accidentally misplaced one of your AirPods, iOS 10.3 and Apple's Find My iPhone app will let you hunt it down as long as you're within Bluetooth range.

Why do my AirPods stop charging?

You may lose sound quality or your buds may stop charging if your earbuds get too grimy ; to fix these issues, you can clean your AirPods in a few easy steps.

Why are AirPods 3 moving to China?

Digitimes: AirPods 3 production moved to China because of COVID surge. A new Digitimes report claims that the assembly of Apple's next generation of AirPods has been moved to China because of a surge in COVID-19 cases in Vietnam which is affecting suppliers. A MOBA for Everyone.

What happens if you lose your AirPods?

There's no getting around it: the AirPods are small. It's what happens when you chop the cord off a set of in-ear buds; they don't have much mass, and if you don't remember to store them in their pillbox case, you may find yourself frantically searching for an earbud or two.

How much does it cost to replace a bud?

If it's just the battery that's affected, you can replace a single bud (or the case) for $49 each.

Where to find serial number on AirPods?

For any of these options, you'll need any of the following three items: Your AirPods. Your AirPods Serial Number (found either on the underside of the AirPods lid casing or by connecting them to your iPhone and going to Settings > General > About > AirPods) Original proof of purchase. If one of your AirPods earbuds (or the case itself) ...

How to get AirPods to work on iPhone?

On your iPhone, iPad, or iPod touch, go to Settings > Bluetooth and tap the "i" icon next to your AirPods. (If you don't see your AirPods in Settings > Bluetooth, just go to the next step.) Tap Forget This Device, and tap again to confirm.

How to fix AirPods that won't charge?

You might need to reset your AirPods if they won't charge, or to fix a different issue. Put your AirPods in their charging case, and close the lid. Wait 30 seconds. Open the lid of your charging case. On your iPhone, iPad, or iPod touch, go to Settings > Bluetooth and tap the "i" icon next to your AirPods. (If you don't see your AirPods in Settings ...

How to fix AirPods not connecting to your Mac

There are a number of reasons your AirPods may be having trouble connecting to your Mac.

How to fix one AirPod not working on a Mac

Sometimes it happens that one earbud but not the other goes a little wonky. To reconnect this rogue earbud, you can try pairing your AirPods again. If the following process doesn’t work, you may need to reset your AirPods following the instructions in the previous section.

How to check AirPods battery status?

You can usually check this by opening your AirPods close to an iPhone or iPad device, where a pop-up battery alert will appear. On a Mac, you can usually see the available charge for AirPods in the Bluetooth menu on the menu bar.

Why are my AirPods not connecting?

A persistent AirPod connection issue could point to a problem with your Bluetooth configuration. One fix for this issue is to remove your AirPods from your Bluetooth pairing list, then reset your AirPods.

How to use AirPods as a microphone?

To use your AirPods as a microphone, switch to the Input tab, then select the AirPods option from the device list.

How to remove AirPods from Bluetooth?

In the Bluetooth settings menu, right-click your AirPods, then press the Remove option.

How to check for updates on Mac?

macOS will check for any available updates in the Software Update menu. If an update is available, your Mac will download and and ready it for installation.

How to charge AirPods?

With the case lid open, press and hold the button on the back of the case for approximately 15 seconds. The LED inside the case will flash amber once this is complete.

What happens if the issue is system related and the bug is fixed?

If the issue is system related and the bug is fixed, this should allow you to connect and use them.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9