how to repair an anti siphon garden faucet

by Emmie Kuphal Published 3 years ago Updated 2 years ago

How to Repair a Frost-Proof Anti-Siphon Faucet

Turn off the water to the faucet. If you don't have a shut-off valve on the line that supplies it, turn off the main water supply for the ...
Unscrew the handle with a screwdriver and pull it off. ...
Grip the valve stem with pliers and pull it straight out. ...
Unscrew the nut on the end of the stem and remove the washer if it is worn. ...

Full Answer

How to repair a dripping outdoor faucet?

Turn off the water to the exterior faucet by locating the valve inside the house and closing it (or the main water valve). Buy a repair kit that matches your faucet brand and use the packing from the kit. If your faucet still leaks, the stem may be leaking and you should replace the faucet.

How to fix a leaky faucet?

Part 1 Part 1 of 2: Dismantling the Faucet

Gather the proper tools. You will need a monkey wrench, bath socket wrench or vice grip pliers, a Philips screwdriver, a flat-head screwdriver, a jar gripper, plumber's grease, a ...
Turn off the water intake to your house. You will need access to the pipes for the next hour or so. ...
Open the hot and cold valves on the bathtub faucet. ...

More items...

How do you repair a leaking faucet?

The first step is to remove the faucet spout. ...
Use a utility knife to score the sealant where the spout and bathtub wall meet for easier removal.
Remove the length of pipe, called a pipe nipple, with a wrench.
Wrap the threads of both ends of the nipple with plumber’s tape or Teflon tape.
Install the nipple into the 90-degree elbow pipe within the wall. ...

More items...

How do you fix a leaking anti siphon valve?

Turn off the water to the faucet and open it before servicing or removing a built-in anti-siphon valve.
Unscrew the plastic cap covering an anti-siphon valve permanently installed inside a frost-free spigot or other outdoor faucet.
Remove the screws holding the valve to the faucet body with a Phillips screwdriver.

How do you fix an anti-siphon outside faucet?

0:502:48How to Fix Anti Siphon Valve on Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo that you don't crack it. Once you remove that any safety valve just put it to the side andMoreSo that you don't crack it. Once you remove that any safety valve just put it to the side and hopefully with any luck the a TESOL anti-siphon valve itself is loose and you just unscrew it.

Why does my anti-siphon valve leak?

When an anti-siphon valve leaks, it could be because dirt has gotten into the valve and is preventing the poppet from seating completely when the water is turned on. The problem could also be a worn poppet or rubber gasket.

How do you bypass anti-siphon valve?

Use screwdriver to push aside flap over filler pipe The flap allows you to insert a hose in but will jam when you try to remove the siphon hose. To bypass this, all you need is a long, skinny object like a screwdriver. Use the screwdriver to push the flap aside and hold it open.

How does an anti-siphon faucet work?

When a hose is attached to the threaded end, the fitting provides anti-siphon protection by allowing air instead of contaminated water to suck back into the pipes when a negative pressure event occurs in the water supply system.

How much does it cost to replace an anti-siphon valve?

To replace your outdoor faucet, expect to pay $10 to $60 for the part itself and an additional $150 to $200 per hour for labor....Loose-Key Hose Bibb.Faucet TypeCostTraditional spigot, hose bibb, sillcock, or outdoor faucet$5 – $170Frost-free faucet$35 – $200+Anti-siphon faucet$45 – $300+3 more rows•Jan 20, 2022

How do you fix a leaky outdoor water valve?

0:452:35How to Fix a Leaky Outdoor Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake the old washer to a plumbing supply store to make sure you're replacing it with the right oneMoreTake the old washer to a plumbing supply store to make sure you're replacing it with the right one put the new washer back inside the packing nut and retighten.

Do you need anti-siphon valve?

An anti-siphon valve is an essential irrigation part that should not be left off your supply list. If you want to keep your drinking water safe while providing yourself with peace of mind then an anti-siphon valve is just what you need.

What is an anti-siphon hose bib?

Product Description. The orbit hose bib anti-siphon valve prevents outside water from siphoning through an outside faucet and contaminating the drinking water used in your home. This valve is easy to install and fits all standard outdoor hose faucets. Its durable construction provides years of reliable use.

Can you use a garden hose to siphon gas?

0:462:22How to siphon gas the right way without getting a ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipThat's already attached to the place roof taking gas out of you're going to take the hose you'reMoreThat's already attached to the place roof taking gas out of you're going to take the hose you're going to pinch it really tight and of course the key is having your bucket.

Can you repair a frost free faucet?

If the faucet leaks from around the handle just when the water is turned on, the stem packing may be leaking. In some cases, you can fix this by simply tightening the retaining nut that's under the handle. Remove the screw in the center of the handle and pull the handle off. Try tightening the nut slightly (Photo 1).

What is the cap on top of my outdoor faucet?

The vacuum cap is circular and about an inch in diameter, and it either slips or screws onto the top of the faucet. The device underneath it is known as a vacuum breaker or an anti-siphon valve.

Is anti-siphon the same as backflow preventer?

Difference Between an Anti-Siphon Valve and a Backflow Preventer. A backflow preventer represents a term covering mechanisms that ensure water does not reenter a public water supply system once sent via an irrigation system. Anti-siphon valves represent one-way valves that allow water to flow in only one direction.

How do you get gas out of a car without a siphon?

2:444:46How To Get Gas Out Of A Car Without A Siphon - Let The Fuel Pump Do ...YouTubeStart of suggested clipEnd of suggested clipAnd we're going to turn it to the on position but not start the car and when I turn it to the onMoreAnd we're going to turn it to the on position but not start the car and when I turn it to the on position you'll hear the fuel pump Prime for about a second or two so we'll go to on.

Where is the anti siphon valve on the fuel tank?

The device used for this purpose is referred to as an anti siphon valve. Such a valve is positioned in the tank's discharge pipe, downstream from the block valve that is located just outside the tank shell.

How does a Marine anti siphon valve work?

It incorporates a valve that lets air into the hose to break the siphon effect when water stops flowing, and that keeps flowing water from spilling out of the hose. (Anti-siphon valve assemblies are sometimes referred to as "vented loops" because the valve is typically in a pipe assembly in a loop of hose.)

How do I drain the wrong fuel in my car?

What to do after putting the wrong fuel in your carLeave your engine switched off and avoid putting your key in the ignition.Let staff at the petrol station know what's happened.Put the car in neutral.Push the car to a safe place.Call breakdown cover or RAC Fuel Patrol to drain and flush your fuel system.More items...•

Why do outdoor faucets need an anti-siphon valve?

Outdoor faucets are required to have an anti-siphon valve to prevent contaminated water from the garden hose being sucked into the drinking water. Repairing an anti-siphon, frost-free faucet is not much more difficult that repairing a conventional compression faucet. Advertisement.

How long should a faucet stem be?

Grip the valve stem with pliers and pull it straight out. Depending on the length of the faucet, it could be 6 to 10 inches long.

How to remove a nut from a faucet?

Hold the body of the faucet steady with a pair of slip-lock pliers and turn the nut behind the handle counterclockwise with a wrench. If it won't turn, spray lubricant on it, wait five minutes and try again. When the nut turns, unscrew and remove it.

What happens if you solder a frost free faucet?

When you solder a frost-free faucet to the supply line, remove the valve mechanism first or the heat will damage it. If your faucet isn't working correctly, it may have been improperly installed.

Do you need a frost free faucet?

Things You'll Need. Frost-free faucets prevent freezing so you don't have to insulate pipes. Freezing pipes are a problem in winter. When water turns to ice, it expands with enough force to rupture joints, and when it thaws, it can cause a flood. An outdoor spigot is especially vulnerable to freezing, unless you have a frost-free one.

Can a spigot freeze?

When water turns to ice, it expands with enough force to rupture joints, and when it thaws, it can cause a flood. An outdoor spigot is especially vulnerable to freezing, unless you have a frost-free one. It has a long stem and is connected inside the house, where its warmer.

What is an anti-siphon faucet?

Anti-siphon faucets prevent unsanitary water from being sucked into the potable water supply used for drinking, bathing, and cooking indoors. Federal housing codes require anti-siphoning devices, so most homes come equipped. Plumbing codes require that a functioning anti-siphon faucet or device must cover all hose bib connections. A hose bib is a small faucet or spigot outside, usually where people connect a garden hose.

Why do people use anti-siphon faucets?

An anti-siphon faucet or valve is installed to prevent the backflow of dirty water into the clean water source. People use anti-siphon taps for outdoor plumbing, utility sinks, and mainly where a hose is attached to supply water outside of a home.

Why are anti-siphon valves called vacuum breakers?

Both meet necessary plumbing codes and function the same. Fittingly, anti-siphon faucets are referred to as “vacuum breakers” because they stop non-potable water ...

How to unscrew a spigot?

With an adjustable wrench, turn the body of the fixture or spigot clockwise. You are trying to unscrew it completely.

How long should I run an anti-siphon valve?

Run the anti-siphon valve for 20 seconds to ensure it is working correctly.

Is American Discount Plumbing a licensed plumbing company?

With over 25 years of experience, American Discount Plumbing has offered expert plumbing service and repair in Phoenix Arizona and surrounding cities at affordable rates for both residential and commercial properties. We are a licensed, bonded, and insured plumbing company with thirty-five years of experience in plumbing. From a simple leak to a complete plumbing renovation, we strive to be reliable, honest, professional and all of our work is guaranteed. Call 602-883-2787 today!

Where is the anti-siphon located on an outdoor faucet?

The anti-siphon device can be a vacuum breaker or an air gap; this fitting is usually located in front of the handle portion of the faucet.

What is anti siphoning?

Anti-siphoning capabilities are required by code on certain plumbing devices, such as exterior faucets (sill-cocks) or utility sink faucets. Anti-siphon devices protect against the possibility of a low water-pressure event in the supply line sucking contaminated water back into the potable water supply.

What is the purpose of a hose fitting?

Where is the valve on a faucet?

On these faucets, the valve itself is located at the back end of the long faucet stem, inside the house itself. This means that the valve is never subjected to freezing temperatures and cannot freeze and rupture, as old-style outdoor faucets are prone to do.

Can you leave a hose on a laundry sink?

For indoor faucets, such as those on laundry utility sinks, it is technically illegal to leave a hose attached to the faucet so that it lies in the bottom of the sink. However, this is very often done anyway, and for these situations, you can buy a vacuum breaker attachment that screws onto the end of the faucet spout.

Can a garden hose be sucked into a spigot?

This can be especially problematic in outdoor faucet spigots (sill-cocks), where a garden hose may lie on the ground or in water puddles. Should a sudden drop in pressure somewhere in the water supply pipes occur, dirty water can be sucked back into the pipes through the garden hose, thus contaminating your home's fresh water.

Do you need an anti-siphon device for a faucet?

Some anti-siphon devices are available for situations in which a hose may be left dangling from a faucet—such as outdoor garden spigots or a faucet in laundry washrooms. Most other applications have no such need since the faucet spout is a located a safe distance from any drain water.

How Bad Is A Leaking Anti-Siphon Valve?

A leaky anti-siphon bad won’t prevent you from being able to turn on the water nor will it lead to a contaminated water system in most cases. However, that doesn’t make it alright.

Where to install anti-siphon valve?

ASVs need to be installed above ground at a higher point than all other valves and spigots in a sprinkler system.

How do I remove a sprinkler valve?

A small screwdriver (not a Philips head) will usually work out well here. Pull off the anti-siphon valve once the screws are loose. If your valve is on a sprinkler system, you may need to saw off the PVC pipe portion that contains the old valve. Should this be the case, it’s best to consult a handyman or a sprinkler repairman instead.

Why won't my anti-siphon valve work?

This is because ASVs are prone to wear and tear, which can often cause leaks . You can also have a leak because of trapped dirt and grime.

What is the valve on a sprinkler system?

When you’re working on your landscaping, the water that you’re using will be flowing from a small spigot known as an anti-siphon valve. These can be found on sprinklers as well as on the sides of your home. The anti-siphon action helps prevent water from leaking out and keeps outdoor water from contaminating your home’s water supply. But, what happens when this thing starts to leak?

How to remove a valve bonnet?

Grab a pair of adjustable pliers and remove the valve bonnet. Unscrew it, don’t try to pull it out unless it’s already loose.

How much does an anti-siphon valve cost?

A typical anti-siphon valve will cost anywhere between $100 to $300 for a full kit. Despite the high price tag, you should not assume that it’s the highest-priced valve you can get. Some types of faucets can cost over $1000. If you want to get the valve professionally replaced, you will have to pay for labor too.

Why do you need an anti-siphon valve on outdoor faucets?

By Chris Deziel. Many local health departments require anti-siphon valves on outdoor faucets to keep contaminated water out of the drinking water supply. These valves, which are designed to admit air when the supply pressure drops, come installed on some faucets, especially frost-free ones, and are located behind a plastic nut on the top ...

How to remove a built in anti-siphon valve?

1. Turn off the water to the faucet and open it before servicing or removing a built-in anti-siphon valve. Before removing a screw-on valve, turn off the faucet, release water from the hose and detach the hose from the valve.

What to do if your faucet won't turn?

If it won't turn, look for a broken-off screw in the upper rim of the valve. If you see one, you can't remove the valve without damaging the threads on the faucet spout, although you can disassemble it to service the parts inside.

How to tell if anti-siphon valve needs servicing?

You can tell that your anti-siphon valve needs servicing or replacement when water sprays from it. The spray occurs because the worn or broken rubber seal allows water to exit through the air holes.

Do spigots have a breakable screw?

They are also available as screw-on additions for spigots with threaded spouts. The screw-on varieties sometimes have a breakable screw that holds the valve permanently to the spigot, and to service the valve, you have to disassemble it.

Can you unscrew a plastic cap on a frost free faucet?

Unscrew the plastic cap covering an anti-siphon valve permanently installed inside a frost-free spigot or other outdoor faucet. This can be done by hand in most cases.

How to disassemble an outdoor water faucet?

Disassemble the outdoor water faucet by turning off the retaining nut. Pull the handle and stem assembly out from the outdoor water faucet and replace the rubber washer. An outdoor faucet that makes a loud vibrating noise when it’s turned on or off probably has a worn out faucet washer.

Why is my outdoor faucet loud?

An unusually noisy outdoor faucet may be due to something as simple as a worn-out washer. To find out, disassemble the faucet from the outside, then check the condition of the washer.

Fixing A Leak in The Anti-Siphon Valve of An Outdoor Faucet: Step by Step Guide

How to Fix A Leak in The Anti-Siphon Valve of An Outdoor Faucet: Supplies

What The Anti-Siphon Valve Does and How It Works

Causes of Problems (Leaks) with The Anti-Siphon Valve

Removing The Anti-Siphon Valve

Here we are at the outdoor spigot. The first thing to do is pop off the cap at the top of the faucet assembly with a flathead screwdriver. This cap was really loose and came right off; you might have to work yours side to side a bit. This one was easy to take off because there is some plastic missing on the piece underneath it. Now I’ll just take s...