How To Repair Electric Recliners
- It's All in the Electrics. If your recliner isn't responding or it seems to have no power, you should first check the outlet it is plugged into.
- Check All the Parts. The next step you can do is making sure to check all the parts of your recliner's electrical system.
- Get to Work. Now that you've done the first steps in electric recliner repair, you can start working on fixing the problem.
- Open or Close. Your recliner may have stopped working either while it is in the open position or in the middle of it being closed.
- Go for the Reset Button. If your chair seems to have overloaded from too frequent use, the motor tends to shut down - this is a safety feature ...
How to fix a recliner that leans back too far?
The steps include:
- Place the recliner in a position where you can easily access the hidden wooden panel. ...
- Remove any upholstery or coverings that are hiding the frame in order to get a better view.
- If necessary, apply oil to any springs and joints that happen to be rusty, or perhaps creaky. ...
How to fix a broken recliner lever?
Step-by-Step Guide For Fixing Lever-style recliner pull handle
- You’ll need one tool, a driver of some kind. Most lever recliner handles these days use a Torx-head screw. ...
- Stand at the back of your recliner and gently push it until it is upside down. ...
- Examine the bottom of the lever handle for the screw holding it in place.
- Remove it with your Torx-head driver.
How to repair power recliner?
To repair, you can simply:
- Flip over your recliner, locate the screws that are attached to the frame, and loosen all of them.
- Protect your cushion’s bottom with an old cloth, and then apply WD40 on all of the joints.
- Try out the handle for any stiffness and then reapply the lubricant as necessary.
- Return the recliner to its proper seated position and then test the footrest.
How to repair Lazy Boy recliner mechanism?
• Detach the spring from the recliner and place it on the floor, right side facing up. • Using the wrench, remove the bolts that hold the footrest to the spring and use the wrench to tighten the new recliner spring to the footrest. • Attach the new spring to the frame of the recliner. Make sure to tighten all the bolts properly.
What to do if electric recliner stops working?
As obvious as it may seem, you can't get power without a good connection, so make sure the battery pack is connected correctly. Also, make sure that the power cord is plugged into the other side of the battery pack. Now that you've checked the back, you can begin checking the base of the power reclining unit.
Can electric recliners be fixed?
In many cases, we can repair the mechanism. If we can't fix the mechanism or cable, motor or switch, we can install its replacement. Some reclining mechanisms, made domestically, are guaranteed for the life of the furniture.
Where is the reset button on electric recliner?
1:136:10Touch Button Power Recliner Troubleshooting - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor only leave the unit plugged into the power source place the chair on its side unplug the dinMoreFor only leave the unit plugged into the power source place the chair on its side unplug the din plug. This will reset the touch buttons.
Can you manually move an electric recliner?
It is possible to move an electric recliner manually. You can use professional services or do it yourself if you have the appropriate resources.
How do you fix an electrical recliner that won't recline?
0:184:10How to fix reclining chair or sofa - YouTubeYouTubeStart of suggested clipEnd of suggested clipStep 1 make sure that the power outlet is working properly you can test it by using a lamp or anyMoreStep 1 make sure that the power outlet is working properly you can test it by using a lamp or any other electrical. Device step 2 try to switch sides for the power cords.
Can you manually recline a power recliner?
The difference between a power and manual recliner is simple: one is motorized and one is not. A power recliner allows you to recline with the simple push of a button and needs to be plugged into a wall outlet.
How long do power recliners last?
between 10 and 20 yearsHow long will the recliner motor last? On average, power recliners with simple mechanics can last between 10 and 20 years, depending on handling and frequency of use.
How do you bypass a power recliner?
0:592:32Bypass a Recliner Motor Switch - Get Your Recliner Moving AgainYouTubeStart of suggested clipEnd of suggested clipWe just need to jumper. Between the DC voltage and one side of the motor. And then bring the otherMoreWe just need to jumper. Between the DC voltage and one side of the motor. And then bring the other side of the motor to ground and it should turn.
How do you test a power recliner motor?
0:299:56Troubleshooting Electric Recliners - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst unplug the chair plug. In a lamp or something that you know that works properly. And make sureMoreFirst unplug the chair plug. In a lamp or something that you know that works properly. And make sure you have power at the outlet. Okay next we're going to check all our cords and connections.
Will power recliners work without power?
2) Power Source This may sound obvious, however power recliners need an electric power source in order to operate. At La-Z-Boy, our power recliners can be plugged into a nearby wall socket or powered with a rechargeable battery hidden underneath the chair.
How do you replace a electric recliner switch?
0:1413:08Power Recliner Switch Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut for this one to take it off you want to go ahead and twist the cover plate off it just locks inMoreBut for this one to take it off you want to go ahead and twist the cover plate off it just locks in like that once that's off there's going to be two screws.
How do I take apart my electric recliner sofa?
2:274:14How to Take Apart a Dual Recliner Sofa for an Easier Move - YouTubeYouTubeStart of suggested clipEnd of suggested clipReally not too hard to do it all. And a back saver. Okay so there we have it separate into threeMoreReally not too hard to do it all. And a back saver. Okay so there we have it separate into three pieces. You can take these rails off too if you want all the way off.
How long do power recliners last?
between 10 and 20 yearsHow long will the recliner motor last? On average, power recliners with simple mechanics can last between 10 and 20 years, depending on handling and frequency of use.
What do you do if your electric lift chair gets stuck in the up position?
Check the up and down buttons or toggle switch on the hand control to make sure they do not stick. If the buttons or switch are sticking in either position, the hand control may need to be replaced.
How do you replace a power recliner motor?
0:101:47Replace Motor on a Power High Leg Recliner - YouTubeYouTubeStart of suggested clipEnd of suggested clipReplacing your power motor disconnect your power source. Place your chair on its side unplug theMoreReplacing your power motor disconnect your power source. Place your chair on its side unplug the power cord unplug your din plug from the side of the motor remove the clevis Andrew.
Do power recliners work without power?
2) Power Source This may sound obvious, however power recliners need an electric power source in order to operate. At La-Z-Boy, our power recliners can be plugged into a nearby wall socket or powered with a rechargeable battery hidden underneath the chair.
How to fix a recliner that is not working?
Your recliner may have stopped working either while it is in the open position or in the middle of it being closed. Different steps are to be taken in fixing the recliner in these situations: 1 Usually, an in-line plug may be the problem when a recliner which is in the open position stops working. The in-line plug may have just come loose so all you'd have to do in this case is check the wiring to see if all the connections are tight and secure. When the recliner is always used, the movement sometimes causes electrical wires to be pulled apart so if that happens, reconnect the wires and secure them with electrical tape so they won't come loose in the future. 2 A recliner which stops in the middle of being closed, fixing it can be more complicated. This may mean that the wiring has gone into the mechanism and it has been cut. When this happens, you'd have to find the wire which has been cut from beneath the chair.Carefully splice the wires together then wrap the open wiring with electrical tape. You may then secure the wires to the frame, far from the mechanism so it doesn't happen again.
How to reset a recliner?
Some recliners have a hole in the Hand Control, between the open and close buttons. Pop in the end of paperclip into the hole to reset it or simply unplug your chair and wait about 2 minutes or more before plugging it in again.
Why does my recliner plug come loose?
The in-line plug may have just come loose so all you'd have to do in this case is check the wiring to see if all the connections are tight and secure . When the recliner is always used, the movement sometimes causes electrical wires to be pulled apart so if that happens, reconnect the wires and secure them with electrical tape so they won't come loose in the future.
What does it mean when a recliner stops?
This may mean that the wiring has gone into the mechanism and it has been cut. When this happens, you'd have to find the wire which has been cut from beneath the chair.Carefully splice the wires together then wrap the open wiring with electrical tape. You may then secure the wires to the frame, far from the mechanism so it doesn't happen again.
What to do if your recliner isn't responding?
If your recliner isn't responding or it seems to have no power, you should first check the outlet it is plugged into. To make sure of this, you can plug in an appliance you know is working properly or a light to check whether the outlet you are using is actually working.
Can an electric recliner be damaged?
Electric recliners have delicate transformers which can be damaged by power surges too.
Do electric recliners come with parts?
Some chairs come with different features so they may come with only a few parts while the best electric recliners may have all of them. List down the parts your chair has so it would be easier to identify which one is not working correctly.
Common issues with power recliners
The first step of repairing an electric recliner is to identify what causes the malfunction. You may assume the issues are complicated, but some can be fixed within a few minutes. Let’s look at the most frequently mentioned problems with power recliners.
How to troubleshoot and fix an electric recliner chair
We mentioned a few causes of a broken electric recliner, now let’s start to troubleshoot them.
Sum up
In this post, we showed you why the electric recliner is not working and how to repair it. Some issues could be fixed in a few seconds but some could be a hard thing to do.
What is the easiest part of a recliner to repair?
Recliner Frame – The frame is the easiest part of any recliner to repair, simply because this usually only consists of metal, wood, and screws. Check the screws from time to time to make sure that they are not coming loose. Reclining Mechanism – The reclining mechanism is the lever that allows you to move the footrest into a reclining position.
What happens if a reclining chair is loose?
If that is the case, all you have to do is tighten up the bolts that hold it in place. From there, you can usually end your repairs, as long as the cable/lever remains in the correct position.
What is the hook on the footrest on a chair?
There will be a small hook that is supposed to latch onto the footrest and prevent you from accidentally reclining in your chair. This latch can work itself loose, so be sure to tighten it up as much as possible so that it works correctly.
What is the footrest on a recliner?
Footrest – The footrest is both part of the frame and the reclining mechanism. This piece of the recliner gets used all of the time, so it is a good idea to make sure it is in working order every once in a while. Padding – The padding in your recliner is what makes it such a comfortable chair.
What is a reclining mechanism?
Reclining Mechanism – The reclining mechanism is the lever that allows you to move the footrest into a reclining position. If this breaks down, you will not be able to recline your chair, which is, obviously, less than ideal. Springs – The springs in your recliner help to provide some of the cushioning that make your recliner so comfortable.
Why is my recliner footrest jammed?
If the footrest on your recliner becomes jammed, the first thing you need to do is turn the recliner over and examine it. The most likely cause for this is that something is misaligned. Look for any loose bolts on the frame of the recliner, as these can cause it to pull to one side, which, in turn, could make the footrest become jammed.
What is a recliner chair?
A recliner is the centerpiece of most households. These chairs are a great place to kick back, relax, and recover after a hard day’s work. Unfortunately, since these chairs are so popular in a home, they get used a lot. This heavy use can make them break down over time.
Why Won’t My Electric Recliner Go Down?
I am rethinking the whole electric recliner. The motor has some kind of short that makes it impossible to recline with it. I changed the position of the legs so they no longer hit the switch, but it is still impossible to recline the chair. I will give you an update. It seems to be getting worse. How often do we try to get an electric recliner down from the “up” position by trying to push the buttons in the “down” position but when we do, nothing happens?
How Much Does It Cost to Repair a Recliner?
The average cost of repairing is around $175. However, that doesn’t mean that’s how much you’ll have to pay:
How Do You Fix a Stuck Recliner in an Open Position?
First, we measure the seat’s width and height. Then, we used a 1/4″ solid angle jig to adjust the seat for a proper recline angle. We also needed to adjust the lever that adjusts the seat height.
Can a Recliner Be Repaired?
The answer is YES!! According to the enclosed instructions I’ve attached, it’s done-able. If you’ve had your chair for a while, the plastic will be soft and flexible. Depending on the age and location of the rip, and what fabric it is, the chances are pretty good that the repair is actually doable, but obviously, it’ll take some time and effort. I put it on a friend’s chair once and it didn’t take too long. Also, it depends on how much the damage is and how much it’s warped. Maybe you should have it checked out by your chair shop first. I read somewhere that the original padding that was in the base was soft fabric or padded fabric, so the recliner would still be able to use this padding even after repair.
