Iphone Cable Repair
- GATHER YOUR TOOLS AND MATERIALS. You are going to need your cable and just two more things. A hot glue gun and a Spring from a Pen. ...
- GET YOUR SPRING ON! Put the spring on the cable. ...
- GLUE IT! Gluing it is an art. Not many people know this ...
- YOU ARE DONE! Now plug it in and see if it works. If it still is charging and you are done. ...
How to fix a broken iPhone charger cord?
The following are the steps for the method:
- Purchase some heat shrink tubes that have a ratio of 3:1. ...
- Buy a heat gun. ...
- Use scissors to cut your heat shrink tubing to the appropriate length. ...
- Using pliers to hold the heat shrink tubing in place, apply heat using your heat gun. ...
- Continue shrinking until you have a uniform, secure fit around both the charging head the cord.
What is the best iPhone charger cord?
Should You Buy a GaN Charger?
- Anker PowerPort PD 2. Though Anker’s PowerPort PD2 has been around for some time, it remains one of our favorite fast iPhone chargers.
- Apple 20W USB-C Power Adapter. Apple’s 20W USB-C Adapter is understated, relatively affordable, and guaranteed to work well with your iPhone.
- Belkin USB-C PD GaN Wall Charger - 60W. ...
How to charge a phone with a broken charger port?
- Turn off your device.
- If possible, remove the battery.
- Get a small stick to rearrange any misplaced tabs inside the USB port of your phone.
- If the charging pin is misaligned, lever it up slowly and gently.
- Reinsert the battery.
- Plug in the charger.
Can You charge an iPhone without the cord?
Today, there are several Ways to charge your iPhone most important of those is wireless charging. You can charge your iPhone without a charger and without plugging it into an electricity source. What you need to do is just purchase a Wireless charger.
See more
Can you use metal on an iPhone?
Never use anything metal, however, as this can short the connection and destroy your iPhone. You can also try gently wiggling the cable around inside the lightning port. This can help make the connection particularly on more damaged cables/damaged ports.
Can you use a toothbrush to clean an iPhone charger?
In some cases, you might not have a broken iPhone charger. Instead, there may be an obstruction or other issue preventing your device from charging. In this case, use a new toothbrush to gently clean your lightning port. Do not use a cotton swab or anything that may get lodged inside the port. Never use anything metal, however, as this can short the connection and destroy your iPhone.
Can you open an Apple power adapter?
Unless you are highly skilled, you really should not attempt to open the Apple power adapter. The USB end of your lightning cable is compatible with any USB charger so just used instead. You can even upgrade to a higher watt USB power adapter to help you charge faster. You don’t want to open the Apple power adapter because it is full of tiny parts glued together that can easily break. Overall, it’s not worth the headache when you probably have several other options around your house. In a pinch, you can always charge from your computer, television, or other devices you have around.
Can you plug an iPhone into a compatible phone?
4) If you have gone through these steps confirming the power isn’t with the plug, the iPhone, or cable then it has to be the power adapter. You can check this by using a different power adapter to charge your iPhone.
Can you fix a soldering iron?
GET A FREE QUOTE. You can use electrical tape to try to fix the connection. If you have a soldering iron, you can actually repair the wiring though this can be quite difficult if you’re not particularly handy. In this case, you might be best off purchasing a more rugged lightning cable from a third party vendor.
Can you fix an iPhone charger?
When it comes to fixing iPhone chargers, there’s not much you can do unless you know your way around a soldering iron. If you are suffering from problems, first isolate the issue to see whether its the wall plug, lightning to USB cable, or power adapter. More likely than not, the USB cable on the lightning port end will be the problem. If this is the case, your best option is to buy a new one. As great as Apple is, you can find both tougher and cheaper cables online through any major retailer.
Step 1: GATHER YOUR TOOLS AND MATERIALS
You are going to need your cable and just two more things. A hot glue gun and a Spring from a Pen.
Step 3: GLUE IT!
Gluing it is an art. Not many people know this... Using hot glue is hard when you don't want it to look like you globed it on and didn't care about it. Just use little at a time. Patience is key in this step to make it look nice. After I placed dabs inside of the spring like injecting it. I would Roll it with my fingers while it was soft.
How to Fix a Broken iPhone Charger
Replacing your iPhone’s charging cable with another officially-branded Lightning Cable is an expensive endeavor. By fixing the cable, you have the chance to save yourself a few dollars while extending the life of your product.
How to Fix a Broken Android Charger
While Android charging cables are more generic than Apple’s Lightning Cables, they operate similarly. As such, some of the fixes described above will work for an Android cable too. For example, the electrical tape and heat shrink tubing solutions are just as effective for Android cables.
Complete the Fix
Whether you fix your charger cable or not may depend on the extent of the work you need to put into the task. If you can fix the cable using electrical tape or heat sink tubing, you achieve an inexpensive and timely fix that may extend the cable’s life by several months.
How to fix iPhone charging from computer?
Since iPhones can be charged from computers, you could also try plugging the cable directly into your Mac in order to take the adaptor out of the equation . If it starts charging, then the problem is most likely with the power adaptor.
How to fix a Lightning connector on iPhone?
If you think the Lightning connecter (which is the portion that goes into the iPhone) is the problem, the only way to fix it is to open it. Grab a cutter and a soldering machine. Take the part of the cable that goes into the phone and slowly and carefully make a cut horizontally to separate the plastic.
How to insulate wires?
Add glue around the wires to insulate it. You might want to add glow to insulate the wires you just attached so they do not touch with each other.
How to reattach wires to a board?
Once all the terminals are exposed, grab a soldering machine and very carefully, one by one, attach each wire back to the board. This is the hardest but most crucial step. This is a very small piece of board and hence harder to work with.
What color wires are on a power supply?
Once the board is exposed, there will be two different sections of wires going into the board. One section should be black and red; this is for the power supply. The other section can be various colors, but is most often green and white. Most likely, one or more of these wires have a loose connection with the board.
Can a Lightning charger charge a device?
Check to make sure charger is working. Most likely, if the problem was with the Lightning connecter, it will be fixed now and it should be able to charge a device.
Can a charger cable be damaged?
The charging cables for iPhone , iPads, etc are used so much in today ’s world that they are very likely to be damaged by various means or even just suffer from wear and tear. Before you decide to go out and spend money on buying a new charger, try these few steps to see if there is a possibility you might be able to fix the problem.
