What do you do when your gas lantern goes out?
Check the bug screen: Bug screens exist to block insects from getting into your gas lantern. If the screen becomes obstructed, there won't be enough oxygen in your gas lamp and the flame will be smothered. Check your bug screen for obstructions and use air to clean it. If it won't come clean, replace the bug screen.
How does a gas yard light work?
Gas lanterns operate using either natural gas or propane which are safe, clean burning fuels. The fuel for the lanterns is controled by a switch which only emits enough fuel at one time to light the flame. These switches can be turned off in the event the flame goes out or you wish to turn off the lantern.
How do you adjust a gas lantern?
Adjust the flame by inserting a flat head tool or screwdriver through the valve access hole in the collar of the lamp. Turn the valve slowly to adjust the height and shape of the flame. Please note: Turning the valve too fast or too far can cause the flame to extinguish.
Do you leave gas lanterns on all the time?
In addition to installation costs, gas lanterns cost an average of $10 per month each to operate, but can cost three times as much to operate, depending on gas prices in the area. The flame is always on unless you extinguish it. If you have a manual igniter, you will have to relight the flame with a match.
When did they stop using gas lights in houses?
The cutoff dates are this Nov. 5 for industrial lights and Jan. 1, 1982, for residential lights.
How do you clean outdoor gas light?
0:421:48How to Prevent Gas Lamp Blowouts | American Gas Lamp WorksYouTubeStart of suggested clipEnd of suggested clipAnd 75 percent to clean your gas lamp. First turn the valve off by turning it into the horizontal.MoreAnd 75 percent to clean your gas lamp. First turn the valve off by turning it into the horizontal. Position. Then once the stem has cooled use a piece of dental floss. And run it slowly through the
How do you replace a mantle on a gas lamp?
0:482:23Changing a mantle on a gas lantern (Camping Lighting Part 3) - YouTubeYouTubeStart of suggested clipEnd of suggested clipBefore you change the mantle make sure the gas is off at the bottle and the extension pole remove.MoreBefore you change the mantle make sure the gas is off at the bottle and the extension pole remove. The old mantle by cutting it off if it's a string tie or unclipping it if it's a metal tie.
Can you turn gas lanterns on and off?
Unlike electric lanterns that can be easily turned on and off with a switch, gas lanterns are always on, regardless of the time of day or whether or not the owner is home.
Are outdoor gas lights safe?
First of all, let's make this clear: gas lanterns are just as safe as conventional lighting. They are as safe to use as a gas stove. In fact, Disneyland still uses gas lanterns in Main Street USA, so if it's safe enough for the Mouse, it's safe enough for your house.
How much gas does an outdoor gas light use?
9 gallons of propane per light per month, on average when burning 24/7.
Do gas lanterns attract bugs?
Doesn't attract insects—nothing can ruin an outdoor event like a swarm of mosquitoes. Gas powered lights give off an amber glow that isn't attractive to insects. Security—gas lighting will continue to operate during an electrical power outage, increasing the safety and security of the home.
How did gas street lights work?
In 1792, William Murdoch, a Scottish inventor, equipped his home with pipes that delivered coal gas to lamps, giving birth to “gas lighting. The coal gas combined with oxygen in the air to produce carbon dioxide, water vapour, heat and light.
How much gas does a gas lamp use?
Typical Figures for Gas Lamps At a typical price of 60 cents per therm, a typical outdoor gas lamp using 3,500 BTUs per hour would consume about 300 therms in a year, working out to an annual cost of $180, assuming continuous operation. By limiting your lamp use, you could operate it for much less.
How do kerosene lanterns work?
A hand-pump pressurizes air, which forces liquid fuel from a reservoir into a gas chamber. Vapor from the chamber burns, heating a mantle to incandescence and also providing heat. Kerosene lamps are widely used for lighting in rural areas of Africa and Asia, where electricity is not distributed or is too costly.
Do gas lamps attract bugs?
Doesn't attract insects—nothing can ruin an outdoor event like a swarm of mosquitoes. Gas powered lights give off an amber glow that isn't attractive to insects. Security—gas lighting will continue to operate during an electrical power outage, increasing the safety and security of the home.
Who should repair gas lights?
It is important to remember that all major repairs to gas lights, such as gas line replacement, installation of a gas light regulator and repair of both electronic and manual ignition modules should be performed by a licensed plumber or electrician.
How to clean a gas light mantle?
To clean the burner tip, ensure the gas is turned off and remove the gas light mantle. Use a pipe cleaner to clean the gas light burner tip and use a new gas light mantle every time.
What happens if you remove the bug screen on a gas light?
If the bug screens become obstructed, the gas light will not get enough oxygen and the flame will become smothered. Remove the bug screens if they are obstructed and clean the using air (your breath should be powerful enough for cleaning) If you cannot remove the obstructions, replace the gas light’s bug screen.
How big should a gas light regulator be?
Gas Lines – For gas lights to work properly, the gas line should be no less than 3/8 inch in diameter.
What happens if you don't have a gas light regulator?
Gas Light Regulator – If your gas light does not have a gas light regulator installed in the gas line, it could cause too much fuel to flow through to the gas light, making the air.fuel mixture too rich. Have a professional plumber install the gas light regulator. If the gas light regulator is already installed, have it inspected by a professional using standardized testing equipment.
What fuel does a gas light run off of?
Gas lights run off of two main fuel sources, natural gas and propane. When properly installed by a licensed plumber, your gas lights should not give you very much trouble. It is possible for parts of the gas light to become obstructed from time to time.
How long do gas lanterns last?
When properly installed, gas lights should last for years without giving you very much trouble. Just like your trusty car, however, every gas light will need some minor maintenance from time to time.
What to do if you have trouble with gas lamps?
If you have tried troubleshooting and are still having issues with your gas lamp, call a local plumber, professional gas lighting specialist, or HVAC provider. If you purchased American Gas Lamp Works lights, reach out to us directly for warranty information.
What to do if gas lamp won't come clean?
If it won’t come clean, replace the bug screen. If you’ve tried these tricks and your gas lamp is still not burning properly, it’s time to call a professional. Here’s what they should check: Look for gas line issues: Gas lights will only work properly if the gas line supplying the fuel is at least 3/8 inch in diameter.
How to clean a mantle burner?
If using a gas mantle burner, gently slide a felt pipe cleaner through each mantle burner tip, and the air shutter ring holes in the burner base at the bottom of the tube to clear out any soot or debris. If using an open flame burner, run a piece of dental floss through the cooled slot in the tip of the brass stem and rub it with a soft cloth to loosen any soot or debris that may have settled or be stuck in this pathway.
How long is the American Gas Lamp Works warranty?
With our American Gas Lamp Works Limited Warranty, the aluminum housing and posts of your lamp have lifetime coverage. The natural gas burner assembly and electric socket assembly are covered for five years, GasGlow® LED for two years, the powder-coated finish is covered for one year against peeling and cracking, and the copper/brass housing is covered for 90 days. Glass and mantles are not covered under the warranty.
What is an open flame gas lamp?
There are two basic types of gas lamps and lights: gas mantle lamps, which use a specialized wick to create light when supplied with gas and ignited, and open flame gas lamps that work without a wick and burn gas directly. Fuel and flame are two things both types of gas lamps need to run properly, ...
How to clean a gas burner tip?
Clean the burner tip regularly by running a piece of floss through the cooled slot in the brass stem. If any debris has settled or is stuck in this pathway, the gas may not be flowing properly, which can cause more frequent blowouts.
How to turn off gas lamp?
To turn the gas off, simply close the valve with a quarter-turn of your tool, turning the valve into the 3 o’clock position. To disconnect your gas lamp from your main gas line, work with your gas professional to turn off the main supply so that the valve in the lamp can be disconnected from the mainline inside the post, pillar, or wall.
How to fix a light fixture that is not working?
If you've replaced your light bulbs with known working bulbs and your fixture still does not work, it's possible that the wiring has come loose in the fixture. Turn off the power at the junction box to the light fixture.
What to do if your light switch doesn't work?
Once you've checked the bulbs and the wiring on the light and the fixture still doesn't work, it's most likely a faulty light switch. Turn the power back off and remove the switch-plate cover. Remove the retaining screws for the switch and pull it out of the wall. There will be a black wire and a red or white wire.
How to fix a light switch that won't turn on?
Check your light switch for loose wires or replace it. Once you've checked the bulbs and the wiring on the light and the fixture still doesn't work, it's most likely a faulty light switch. Turn the power back off and remove the switch-plate cover.
How to tell if a fixture is off?
You'll be able to tell if the power is off to that fixture by using an outlet tester on the same wall that the fixture is attached to. On the interior side of the wall, plug the ends of the outlet tester into an electrical outlet to see if any power is registering; if not, you should be fine.
Where are outdoor lights located?
Outdoor lights are often found on front and back porches, back patios, garage entrances or on the gable end above the garage entrance. If you cannot afford replacement, paint or new globes can often give these fixtures a face-lift without replacing them. Advertisement.
Can you replace a broken globe on an exterior light fixture?
If your exterior light fixture has a broken globe, it can easily be replaced. Remove what's left of the old globe and measure the threaded portion or top of the globe. This is the size that you need the threaded portion of the new globe to be. One size does not fit all. Advertisement.
Can you replace globes on outdoor lights?
Outdoor lights are often found on front and back porches, back patios, garage entrances or on the gable end above the garage entrance. If you cannot afford replacement, paint or new globes can often give these fixtures a face-lift without re placing them .
What is an exterior gas lamp?
Exterior gas lamps offer a unique way to create light and ambiance on your patio or front walkway. Gas lamps use either a natural gas supply line or an LP tank to fuel the lamp. Lighting an exterior gas lamp first requires inspecting the lamp to ensure that the mantle is intact. If you must replace the mantle, avoid touching the fabric mesh ...
How to remove glass from a lamp?
Open or remove one of the lamp's glass panels. Most glass panels simply lift up with your finger and you pull them away from the lamp. Some lamps use hinges on the glass panel that you simply open like a door.
Where is the gas valve on a lamp?
Depending upon your lamp, the gas valve might be a device at the base of the lamppost, a screw on the bottom of the lamp light or an on/off lever near the top of the lamp light.
Do gas lights have an igniter?
Some gas lights use automatic igniters. These require specific instructions from the manufacturer. Most often there is a light switch that powers the igniter.
Can you touch a mantle with a flame?
If you're lighting a new mantle, do not touch the mantle with the flame. The fabric on the outside of the mantle will ignite without direct contact with the flame. If you're lighting an old usable mantle, hold the match close enough to ignite the mantle without touching it with the match.
How to remove anchor bolts?
Removing the nuts this way helps prevent the post from falling to one side as it is released. If the nuts are too tight, you may need to apply a penetrating fluid such as WD-40 and allow it to soak in between the bolt threads.
Do you need to cover a lamp post with black tape?
Turn the power on to the lamp post and make sure that it works properly. If the lamp is on a photoelectric sensor, you may need to cover the sensor with black electrical tape.
Can you cut wires from a lamp post?
Since you will be discarding the old lamp post, you can simply cut the wires as close to the wires nuts where they connect to the lamp as possible. If the extra wire is at a premium, it may be better to remove the wire nuts instead, conserving all of the excess wire there is.
Why add gas lights to the outside of a house?
Gas lamp installation creates a unique ambiance that transforms your landscaping and allows you to enjoy outdoor living. By enlisting the help of a qualified Houston plumber, we’ll ensure that your new gas light fixtures work and are reliable. Here are four factors to consider when planning to add gas lamps to your existing outdoor décor:
What to do if you smell gas in Houston?
If you smell gas, move away from the area and call a qualified Houston residential plumber
How much clearance is required between gas lanterns?
Most city and state codes require at least six inches of clearance between gas lamps and any other combustible substance. Additionally, a clearance of 12 inches is required between the top of the gas lantern and other items. These restrictions are intended to reduce the risk of fire and other accidents associated with gas lamps.
Can gas lamps burn?
Use care in touching the glass or metal parts of the lamp during operation. Gas lamps can generate a fair amount of heat that can sometimes cause burns.
Do gas lanterns work?
As gas specialists, we help make sure your gas lanterns work beautifully and safely. Gas lights are great because they last a long time and they’re also an energy efficient and inexpensive source of lighting for your home. However, just like anything else, they may need repairs from time to time.
Can you use an electronic ignition module on a gas light?
Newer models, however, may include electronic ignition modules that allow you to light these lamps at the touch of a button. Gas lamps that feature electronic ignition may require added wiring during gas light installation.
Can you use gas lights in Houston?
Depending on the desired lighting effect, you can choose from pole-mounted or wall-mounted gas lights. In some cases, a mix of these two gaslight options can deliver the most attractive results for your front yard, garden, or patio area. Consulting with your local Houston plumbing company can provide you with professional guidance on the most appropriate solutions for your outdoor lighting needs.