Repairing Guides

how to repair an outdoor spigot

by Dr. Roselyn Kub Published 3 years ago Updated 2 years ago
image

How to Fix Your Faulty Spigot

  1. Turn off the Water Supply. Before you do anything, turn off your water supply. ...
  2. Let out any Excess or Accumulated Water or Pressure. You’ll likely have water or pressure left in the pipes after you have turned off the mains/water meter.
  3. Loosen the Packing Nut. ...
  4. Remove the Spigot’s Valve. ...
  5. Restore the Washer. ...
  6. Change the Packing Nut. ...
  7. Put the Valve Back. ...

More items...

Full Answer

How can I stop a leaky outside spigot?

To fix a faulty spigot with ease, here are some must-have tools and materials:

  • Flat and Philips screwdrivers
  • Wrench
  • Pipe cutter
  • Safety glasses
  • Seat washer
  • Brush with stiff bristles
  • Adjustable pliers
  • Packing washer
  • Spray lubricant

How to replace an outdoor spigot faucet water spout?

Things You Will Need

  • Wrench
  • Spray lubricant
  • Adjustable pliers
  • Phillips screwdriver
  • Flat-head screwdriver
  • Seat washer
  • Packing washer or packing string

What is the best outdoor spigot?

Best Outdoor Faucets & Hose Bibs. We’ve reviewed 6 of the best outdoor faucets and hose bibs on the market. March 15, 2021 by PlumberJohn. Instance 1. Best Rain Barrel Spigot. Currently On Sale. RAINPAL RBS005 Brass Water Container/Rain... View Product On Amazon.

How to change outside spigot?

Just a few include:

  • Hose bibb tee handle: about $8–$30
  • Better grip outdoor faucet handle: $20 on average
  • Round wheel handle: $6–$22
  • Turn hose bibb handle: about $15
  • Decorative handle: range from $15 to over $100

image

Do you need a plumber to replace outdoor spigot?

Replacing and installing an outdoor faucet is not just a quick handyperson job. It's a good idea to hire a licensed, bonded and insured plumber for the work, which should only take a few hours unless there are unseen problems.

How do you fix an outside water spigot?

0:342:35How to Fix a Leaky Outdoor Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake the old washer to a plumbing supply store to make sure you're replacing it with the right oneMoreTake the old washer to a plumbing supply store to make sure you're replacing it with the right one put the new washer back inside the packing nut and retighten.

How much does a plumber charge to replace an outdoor spigot?

Plumber Cost to Install a New Outdoor Water Spigot For most small jobs, plumbers charge a flat rate of $100 to $300 which includes both materials and labor. For larger projects that require new pipes, demolition or that might exceed an hour and a half, expect to pay $45 to $65 per hour.

How do I replace an outside spigot valve?

0:061:12Quick Fix: How To Replace an Outdoor Hose Spigot - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe threads clean off any corrosion or leftover pipe dope using a stiff bristled brush wrap theMoreThe threads clean off any corrosion or leftover pipe dope using a stiff bristled brush wrap the exposed threads with thread seal tape screw on the new spigot until it is seated on the threads.

What is the difference between a faucet and spigot?

Faucet is the most common term in the US, similar in use to "tap" in British English, e.g. "water faucet" (although the term "tap" is also used in the US). Spigot is used by professionals in the trade (such as plumbers), and typically refers to an outdoor fixture.

Do you need a plumber to replace a faucet?

By hiring a plumber to handle the installation for you, you'll end up saving money in the long-run. They stand by their work and if a leak happens as a result of the new faucet, they'll make the necessary repairs. Even better, they'll be able to protect the rest of your plumbing during the installation.

What are the parts of an outdoor faucet called?

The 9 Parts of an Outdoor FaucetSupply Pipe. Although the supply pipe isn't a direct component of the outdoor faucet itself, you can't get water without it. ... Wall Mount. ... Faucet Housing and Spigot. ... Valve Seat. ... Stem Washer. ... Spindle (Stem) ... Packing Washer. ... Packing (Bonnet) Nut.More items...•

Introduction

Use this guide to help you successfully remove the corrosion from your outdoor water spigot. Overtime, there will become residue buildup on the faucet portion of the spigot that refrains your garden hose to attach properly, causing spraying water and unwanted leaks.

Step 2

Once wet, apply 1 tbsp. of Bar Keepers Friend soft cleanser to the area (s) that has any built up residue.

Step 4

Brush the cleanser that is on the spigot with a wire metal brush until you notice that the residue is gone.

Step 6

Using plumbers tape, wrap around the spigot once ensuring that is it fully covered.

How to get water back into a spigot?

You are one. Turn on the water mains or your water meter to let water back into the pipes. Next, turn on the spigot and let it run for a couple of minutes. This releases any air pressure that built up while you were fixing the spigot.

What to do if water dripping from spigot?

If you notice water dripping from the spigot’s handle, change the packing nut. It’s also wise to replace the nut if you haven’t adequately serviced the tap in a while.

Why does my outdoor spigot leak?

Outdoor spigots typically start leaking when the packing or seat washers wear out. These washers are located around the spigot’s handle. You’ll need to remove the faulty washer and replace it with a new one. Here’s an easy 9-stey by step guide to fixing your faulty spigot:

How to remove a tap stem?

To remove the stem, you’ll need to hold the spigot and water pipe that supplies water and turn both counterclockwise. In some taps, all you need to do is pull the valve firmly.

How much water is wasted from leaking spigots?

According to the United States Environmental Protection Agency (EPA), water leaks lead to over 1 trillion gallons of water wasted annually nationwide . Consider how much leaking spigots contribute to this statistic, and you know you have a problem to deal with right away.

Is a small water leak a sound?

The sound of a small water leak is easy to ignore – except not only is that the sound of your money draining away into the ground, but you are also exposing your home foundations and any other concrete works close by to structural damage.

How long is a spigot?

The spigot that rests on the outside of your building is actually a pipe that's between eight and 16 inches long. On the end of the pipe is a “male” threaded connection. Using a pipe wrench, turn your spigot counterclockwise to unthread the connection to the water line (Image 2).

What type of plastic is used for spigots?

A Word on Water Supply Lines. The pipes running to your spigot are either copper, PVC plastic (white or yellow) or PEX plastic (blue and red). Copper pipes are rigid. They'll make unscrewing your spigot relatively easy because they won't move while you’re unscrewing a fixture.

What to do when disconnecting a pipe?

Shut Off Water. The first thing you need to do when disconnecting a pipe is to shut off the water to the house. Water is constantly flowing from the municipal pipe at the street to your house; stopping that flow of water will keep things dry while you work on your plumbing project.

Can you cut PEX line above a spigot?

If you’re replacing a spigot and your house water lines are PEX, you may want to simply cut the PEX line just above the spigot. Once the line is cut, add a “female” threaded shark-bit fitting and twist on your new spigot. At one point or another, you are going to have to replace an outside hose spigot.

What to do if spigot is leaking from handle?

The solution for this is tightening the loose nut or replacing the worn out washer.

What does it mean when a spigot leaks?

If you spigot is leaking all the time (through the spigot spout), it is a sign that the valve seat washer is worn out. This washer is usually located at the front of the spigot stem, connected to it using a Philips screw.

Quick Background

First, I live in Illinois, so anything in the outdoor space that is replaced needs to stand up to the cold winter months. And my valve is actually inside the wall in the conditioned space. This is so the valve and water are not open to the elements and don’t freeze, lead to damage and, ultimately, cause a water leak.

The Wrap Up

Now, I have a brand new outdoor spigot and it should be ready for years to come. Remember, don’t leave your hose connected to your spigot even with vacuum breaks. It’s best to take them off – especially through seasonal changes when you’re up in the northern states.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9