Unplug your Andis clippers from the wall outlet and lay them on a flat surface with the blades facing up. Remove the two screws holding the blades to the clippers with a Phillips screwdriver, turning the screws counterclockwise. Take the old blades from the Andis clippers and install the replacement blades onto the clippers.
Full Answer
How to change the blades on Andis Clippers?
- Face the teeth of the clippers away from you.
- With both thumbs push forward and upward on the blade. ...
- If necessary, take the hinge out by using a flathead screwdriver to pry out the tongue.
- Clean all parts while the blade is disassembled.
- Face the teeth away from you and slide the new blade straight down! ...
- Steady the plastic grips and click into place.
How to clean and maintain your Clippers?
Things to Remember
- Clean your clippers frequently or at least once a week or after third or fourth use to prevent blade infections
- There are no substitutes for clipper oil. ...
- A few drops of clipper oil is enough. ...
- Opt for using the brush provided by the manufacture or the brand. ...
- Reassemble the clippers properly and align the blades well to prevent malfunction
How to clean and sterilize electric hair clippers?
- Rinse the combs manually with soapy water.
- Hold them under running tap water to wash off the soap.
- Wipe off the excess water with a cloth.
- Allow the combs to air-dry overnight.
- Store them in a clean box.
How do you clean and disinfect a hair clipper?
How to Clean Hair Clipper
- Unscrew the Blades. Find and unscrew the screws connecting the blades to the remaining clippers. ...
- Clean Dirt Using Blade Brush/Toothbrush. Grab the blade brush that comes with the clipper and scrape off all the bits. ...
- Disinfect/ Sterilize the Clippers. ...
- Clean the Comb Attachments. ...
- Lubricate the Blades with Oil. ...
- Turn on the Device and Wipe off Residue. ...
Why did my Andis clippers stopped working?
Make sure the power switch is completely rotated to the on position and that the switch is not too loose. Make sure that the power cord is securely plugged into an electrical outlet (with appropriate voltage), if the clippers fail to operate.
How do I service my Andis clippers?
0:274:21Andis Hair Clipper Basic Maintenance Tips - YouTubeYouTubeStart of suggested clipEnd of suggested clipRemove the lower and upper blade grab your replacement blade and place the upper blade onto theMoreRemove the lower and upper blade grab your replacement blade and place the upper blade onto the drive and follow with the lower blade. With your thumb pressing on the lower blade. Set in your screws.
How do you fix clippers not working?
Why Won't My Blades Cut?Remove the blade from the clipper.Use a small cleaning brush to get any loose hair that may have accumulated between the blade and clipper. You may also use a pipe cleaner or index card to clean between the teeth of the blade. Next, you should oil your blade regularly.
Does Andis have lifetime warranty?
All Andis products have a 1-year warranty from date of purchase. Products can be sent to Andis for repair or replacement (our choice—we base this on models) if proof of purchase is provided. Unfortunately, you will have to cover shipping on this one.
How often should I oil my Andis clippers?
Oil in the motor compartment will eventually damage the motor. Blades should be oiled after cleaning with Hygienic spray. Clipper should be oiled with each use. Trimmers should be oiled once a day or after several usages.
How do you take apart an Andis Master clipper?
3:488:23Andis Masters Hair Clippers: Tuning, Service And Repair For A Kick Ass ...YouTubeStart of suggested clipEnd of suggested clipHere now that we've loosened the tension screw and lift it up and we want it to make a loud rattlingMoreHere now that we've loosened the tension screw and lift it up and we want it to make a loud rattling noise. Like so now when you put it to make this loud rattling noise we now need to turn.
Can hair clippers be repaired?
The cutting blades can become clogged and the cutting edges can be damaged. Fortunately, you can make many repairs yourself.
Why did my clippers stopped cutting?
If you can stop the cutting blade with very little pressure, then your power is too weak, and you will need to clean out your tool and/or adjust the power (upcoming article). If all the teeth are present and your power is good, then you will need to clean your blades.
Why are my clipper blades not moving?
1:054:05Clipper Blades Not Moving But Andis Masters Hair Clipper ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's not going to swing off of the common blade therefore it's not going to move because it's at itsMoreIt's not going to swing off of the common blade therefore it's not going to move because it's at its far Ridge. Point. So I'm going to just turn this on now so you can see that happening so as you saw
How do I send back my Wahl Clippers?
Step 1: Call 1-800-PRO-WAHL (1-800-776-9245) or visit our Support Form and one of our customer service representatives can gladly assist you in. Step 2: Place the Wahl product to be repaired in a box (see image below.
Where are Andis Clippers made?
Racine, WisconsinAndis Clipper Company builds manufacturing and office facility in Racine, Wisconsin.
Who owns Andis Company?
Matthew K. Andis was named president of Andis Company on June 1, 2010 at the age of 38. He is the fourth generation to hold the position and shares the responsibility of guiding the company with his sister, Laura Andis-Bishop, who was named Co-President in 2017.
How do I send back my Wahl Clippers?
Step 1: Call 1-800-PRO-WAHL (1-800-776-9245) or visit our Support Form and one of our customer service representatives can gladly assist you in. Step 2: Place the Wahl product to be repaired in a box (see image below.
How do I contact Wahl?
(800) 767-9245Wahl Clipper / Customer service