Directions for repairing your Apple cable:
- Cut two pieces of the heat shrink tube. The first should be only slightly longer than the spring of the ballpoint pen,...
- Slide the shorter piece of the tube over the connector and position it just over the fractured point in the cable.
- Heat the shrink tube carefully from all sides. Use a tea light or a lighter for this. Slowly...
How to repair iPhone charger cable easily at home?
Is Your iPhone Charger Broken?
- Is your wall socket or surge protector functioning? Try using a different plug instead or plug something else into the socket. ...
- Is a problem with your iPhone or iPad? If you have another iOS device handy (or anything that uses lightning interface) connect that with same cable and adapter. ...
- Is the cable functional? ...
How to fix iPhone not charging?
What are the Possible Reasons Why the iPhone is Not Charging?
- Damaged power adapter/Lightning Cable
- Uncertified charger
- Dirt that may have clogged up the charging port
- Bad charging habit
What to do if you need iPhone charge port repair?
- Remove the back cover, SIM card and microSD card
- Remove the battery
- Unscrew the midframe and disconnect various cables and screws
How to fix broken iPhone charging cable?
Iphone Cable Repair: If you ever had your cable and it started to frey around the tip of the charger from over use this will help you fix this problem.
Can a charger cord be repaired?
Examine the cable for any signs of cracks or splits, particularly around the connection point between the cable and its charging port. Once found, you can wrap electrical tape around the split to bind it back together. Sometimes, this is enough to fix the connection, leading to the cable working again.
How do I fix my iPhone charger cord not charging?
Follow these steps:Remove any debris from the charging port on the bottom of your device.Restart your iPhone or iPod touch.Try a different USB cable or charger.Make sure that you have the latest version of iOS.Contact Apple Support to set up service.
Why do iPhone cords stop working?
These could be due to strain and corrosion — in other words, normal wear and tear. Sometimes it's because you are using a cheap knock-off cable of low quality. You will encounter an error that the cable is not certified on the iPhone if this is what is causing the charging issue.
Why do Chargers stop working?
You Have a Faulty Cable, Adapter, or Power Outlet A damaged charging cable is one of the most common causes of charging issues. There are many ways cables become damaged, leaving wires exposed or broken. In addition, cuts and bends could be the reasons your cable is not working as expected.
How to separate plastic from charger?
With a flat headed screwdriver start separating both plastic faces from the charger. You need to use a little force to do this.
How to remove the foil from a charger?
Insert the screwdriver into the top part of the charger and carefully separate the foil from the plastic enclosure. Be careful as to not rip off the foil from the inner part of the charger.
How to remove plastic cable?
Peel the plastic off the cable with a knife or a wire stripper.
How to loosen up adhesive on power connector?
Use the screwdriver to loosen up the adhesive on both sides of the power connector.
How to stop cable from pulling out of plastic enclosure?
Take 3 small zip ties and tie them around the cable to stop it from being pulled out of the plastic enclosure.
How to tell if a charger is glued?
Look at the line that goes though the charger. This is all glued with some super adhesive that prevents you from just taking it apart.
What to cover up white and black wires with?
Cover up with electrical tape the rest the white and black/outer cable you just soldered.
Can you use metal on an iPhone?
Never use anything metal, however, as this can short the connection and destroy your iPhone. You can also try gently wiggling the cable around inside the lightning port. This can help make the connection particularly on more damaged cables/damaged ports.
Can you use a toothbrush to clean an iPhone charger?
In some cases, you might not have a broken iPhone charger. Instead, there may be an obstruction or other issue preventing your device from charging. In this case, use a new toothbrush to gently clean your lightning port. Do not use a cotton swab or anything that may get lodged inside the port. Never use anything metal, however, as this can short the connection and destroy your iPhone.
Can you open an Apple power adapter?
Unless you are highly skilled, you really should not attempt to open the Apple power adapter. The USB end of your lightning cable is compatible with any USB charger so just used instead. You can even upgrade to a higher watt USB power adapter to help you charge faster. You don’t want to open the Apple power adapter because it is full of tiny parts glued together that can easily break. Overall, it’s not worth the headache when you probably have several other options around your house. In a pinch, you can always charge from your computer, television, or other devices you have around.
Can you plug an iPhone into a compatible phone?
4) If you have gone through these steps confirming the power isn’t with the plug, the iPhone, or cable then it has to be the power adapter. You can check this by using a different power adapter to charge your iPhone.
Can you fix a soldering iron?
GET A FREE QUOTE. You can use electrical tape to try to fix the connection. If you have a soldering iron, you can actually repair the wiring though this can be quite difficult if you’re not particularly handy. In this case, you might be best off purchasing a more rugged lightning cable from a third party vendor.
Can you fix an iPhone charger?
When it comes to fixing iPhone chargers, there’s not much you can do unless you know your way around a soldering iron. If you are suffering from problems, first isolate the issue to see whether its the wall plug, lightning to USB cable, or power adapter. More likely than not, the USB cable on the lightning port end will be the problem. If this is the case, your best option is to buy a new one. As great as Apple is, you can find both tougher and cheaper cables online through any major retailer.
Why is my Apple charging cable fraying?
Apple charging cables, such as the Lightning to USB Cable, are easily prone to fraying. Most commonly, this fraying occurs from device usage while charging. Cables may be subject to extreme angles while charging which causes the outer coating to loosen, tear, and ultimately expose its wiring.
Is exposed cable wiring dangerous?
Exposed cable wiring is hazardous to both the device and its user, and may cause electrical shorting or even shocking. Repairing a frayed cable with heat shrink is an easy and inexpensive alternative that allows the user to safely charge their device.
How to shrink a cable?
Heat the shrink tube carefully from all sides. Use a tea light or a lighter for this. Slowly and evenly heat the tube from all sides, so it will shrink wrap itself around the cable. Twist the spring carefully around the first layer of shrink tube.
Why do you need a spring on a cable?
The spring prevents excessive bending or kinking of the repaired spot. Your cable is repaired and further damage is much less likely! If your cable is new and not yet damaged from wear, you may want to use a variation of this trick. Just use a spring and twist it around the top of the cable.
Can Apple provide a charging cord for iPad?
I find it hard to understand why Apple which is one of the worlds largest multi national companies can’t provide a sturdy cord for the iPhone, iPad or MacBook. It boggles my mind how such a premium product can be made so poorly, the charging cables for Apple devices are unfortunately very sensitive. Sooner or later, most cables break, with the rubber near the plug breaking and exposing the wire and this happens with normal use.
Can you replace a charger if it breaks?
You will want to consider replacing your charger if the wires are broken and frayed. If your cable has just started to break and looks like mine, it’s not too late. With a few simple tools you can do quick and easy repair. The shrink tube should be thick enough so that the thin connector just fits through the cable.
How to fix a broken charger?
Start with putting the glue into one of the halves of the cover. Then press the charger in and hold firmly for 30 seconds or until connected. Repeat with the other half. Add glue on to the outside where you may see some cracks just to hold everything more firmly.
What size tube do I need for a lightning charger?
The size tube you will need depends on the charger you need to fix. For the apple lightning charger, I used 5/16" tubing.
Is it bad to have a frayed charger?
Not only is it annoying to have a frayed charger, but it can also be dangerous. In this Instructable, I will show you 3 ways to fix or protect a broken charger. Let's get started!
How to Fix a Broken iPhone Charger
Replacing your iPhone’s charging cable with another officially-branded Lightning Cable is an expensive endeavor. By fixing the cable, you have the chance to save yourself a few dollars while extending the life of your product.
How to Fix a Broken Android Charger
While Android charging cables are more generic than Apple’s Lightning Cables, they operate similarly. As such, some of the fixes described above will work for an Android cable too. For example, the electrical tape and heat shrink tubing solutions are just as effective for Android cables.
Complete the Fix
Whether you fix your charger cable or not may depend on the extent of the work you need to put into the task. If you can fix the cable using electrical tape or heat sink tubing, you achieve an inexpensive and timely fix that may extend the cable’s life by several months.
