how to repair apple ipod

If your iPod is frozen and unresponsive, the quickest and most common fix is to perform a reset. This will reboot the iPod and start the operating system over. Resetting your iPod will not cause any loss of data. To reset an iPod Touch, press and hold the Power and Home buttons for about 10 seconds until the Apple logo

appears.

Full Answer

How do you revive an iPod?

How do you revive a dead iPod nano? H ow to Restart an iPod Nano. Press and hold the Sleep/Wake button until the screen goes blank. Wait 30 seconds, then press the Sleep/Wake button again to restart.

How to reset an iPod on a computer?

Part 1: How to reset iPod Touch, Nano 6th and 7th Generation

1. Connect your iPod to computer via USB cable
2. Open iTunes-> Choose iPod in the source panel->Go to the summary tab of the main iTunes window
3. And iTunes should be showing you a message and click restore.

How to restore a broken iPod?

Restore your iPod.

• Connect your iPod to your computer and open iTunes. ...
• If your iPod does not show up in iTunes when you plug it in to your computer, you will need to put it into Recovery Mode first.
• Backup your iPod. ...
• Click the "Restore iPod" button to begin the Restore process. ...
• Reload your old backup. ...
• See this guide for more details on restoring your iPod.

Who can fix my iPod?

iPod Repairs - The Repair Depot The Repair Depot can fix your iPod. We specialize in repairs for the following iPod models: iPod Touch, iPod Classic, iPod Nano, And Much More! The Repair Depot Team has been doing iPod repair since Apple Inc. introduced the original iPod in 2001.

See more

Can an iPod be repaired?

If your iPod screen is broken, we might be able to service it for an out-of-warranty fee. Accidental damage isn't covered by Apple Warranty. The cost to repair an accidentally damaged screen depends on your iPod model, any additional damage, and if you have AppleCare+ coverage.

How do I get my old iPod to work again?

Force restart your iPod classicPut the Hold switch firmly in the unlocked position.Press and hold the Menu and Center (or Select) buttons for 8 seconds, or until you see the Apple logo.

What to do when iPod is not working?

Here's what to do:Check that you have firm cable connections. Remove any debris from all ports.Try using a different charging cable, power adapter and power source. Don't use an adapter or cable that shows any sign of damage.If your device still isn't turning on, it may need a repair. Contact Apple Support.

Can a classic iPod be repaired?

The Repair Depot can fix your iPod. We specialize in repairs for the following iPod models: iPod Touch, iPod Classic, iPod Nano, And Much More! The Repair Depot Team has been doing iPod repair since Apple Inc. introduced the original iPod in 2001.

How come my iPod won't turn on?

Here's what to do:Check that you have firm cable connections. Remove any debris from all ports.Try a different charging cable, power adapter, and power source. Don't use an adapter or cable that shows any sign of damage.If your device still doesn't turn on, it might need repair. Contact Apple Support.

Why won't my old iPod turn on?

Your iPod may just need a soft reset. This is the most common reason why your iPod isn't turning on. Simply, hold down the power button and the home button at the same time. If this has worked, you will see an Apple logo on your screen.

How do you revive a dead iPod touch?

Plug the iPod into the USB port of your computer and start iTunes. If iTunes recognizes the device, attempt to backup the iPod Touch and restore the unit by clicking the "Restore" button.

Why is my iPod screen black and wont turn on?

Press and hold both the top button and the volume down button until you see the Apple logo. If your iPod touch doesn't turn on, follow these steps to check your hardware and charge your device. You might need to charge for up to an hour. If your iPod touch still doesn't turn on, contact Apple Support.

How do I fix a corrupted iPod Classic?

Connect the device to the USB cable, press MENU+SELECT like a standard reset but keep holding for 12 seconds. The device should reboot as normal and then the screen should go blank. Now open iTunes and try to restore again. If all else fails try Erase your iPod - The Super Fix for most iPod Problems.

How can I tell what generation iPod I have?

You can distinguish the iPod touch (3rd generation) from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number.

Does Apple still support ipods?

According to Apple, "products are considered obsolete when Apple stopped distributing them for sale more than seven years ago." In practical terms, this means that Apple no longer offers any service or repairs for these products.

How do I restore an old iPod classic?

0:292:35How to Restore a Broken iPod - YouTubeYouTubeStart of suggested clipEnd of suggested clipStep 2 plug in your cert epen in iPod connector and wait till the screen says do not disconnect in aMoreStep 2 plug in your cert epen in iPod connector and wait till the screen says do not disconnect in a black and white start step 3 in iTunes. Click on restore iPod.

What can I do with an old iPod classic?

Here are our top tips on what to do with an old iPod.Install New Firmware.Replace the Battery.Use Your iPod as a Portable Hard Drive. Even if you've already got a newer iPod or iPhone, you can still put your old one to good use. ... Replace the Hard Drive.In-Car Music. ... Sell It!

How do you reset a disabled iPod?

If you forgot your iPod touch passcodeStep 1: Make sure that you have a computer (Mac or PC) This process requires a Mac or PC. ... Step 2: Turn off your iPod touch. Unplug your iPod touch from the computer if it's connected. ... Step 3: Put your iPod touch in recovery mode. ... Step 4: Restore your iPod touch.

Why can't I restore my iPod classic?

If the device still won't restore normally try this method. Connect the device to the USB cable, press MENU+SELECT like a standard reset but keep holding for 12 seconds. The device should reboot as normal and then the screen should go blank. Now open iTunes and try to restore again.

How to get help with iPod?

To get help in person, bring your iPod to an Apple Authorized Service Provider.

How to get support for iPod?

Contact an Apple Authorized Service Provider to get support and service. Be ready with your iPod’s serial number and your Apple ID.

How do I get service for my iPod?

Apple offers many ways to get support and service for your iPod. Choose the one that’s best for you. Our support articles might answer your question. Or we can help you with batteries, cracked screens, and other issues.

How long is the warranty on an iPod?

The Apple Limited Warranty covers your iPod and its accessories against manufacturing defects for one year from the date you bought your product. The Apple Limited Warranty is in addition to rights provided by consumer law.

Is the power adapter included in the iPod?

The Apple-branded accessories that come in the box with your iPod, including the power adapter, are covered by our warranty and consumer law. For service details, contact Apple or an Apple Authorized Service Provider.

Is there a charge for repairing an iPod?

There's no charge if the issue is covered under warranty or consumer law. If your issue isn’t covered, the price depends on the type of repair. If we can’t repair your iPod, you might need to replace it.

Does Apple warranty cover iPods?

The Apple Limited Warranty covers a defective battery. We might need to test your iPod to find the cause of your battery issue. If your battery has a defect and it's covered by our warranty or consumer law, we'll replace your iPod at no additional cost.

Who wrote the disassembly guide for iPods?

Complete disassembly and installation guides for most iPods, including the iPod original, Mini, Shuffle, Nano, Classic, and Touch. Author: Miroslav Djuric (and 16 other contributors)

When did the iPod come out?

The iPod line is a series of portable media players and pocket computers designed and sold by Apple Inc. The iPod line launched on October 23, 2001, with the original iPod.

What is the difference between iPod Classic and iPod Nano?

Each of the iPod versions includes tell-tale features that identify them. The iPod Classic is hard-drive-based; the iPod Touch features a touch screen; the iPod Nano is video-capable; the iPod Shuffle does not include a screen; the iPhone includes calling capabilities. Some iPod models appear visually similar. If you're unsure which iPod you have, you can identify your iPod here.

How many iPods were sold in 2007?

Now, the iPod sales record is only eclipsed by Apple’s own iPhone. By September 2007, over 150 million iPods were sold globally.

Is the iPod Classic hard drive?

The iPod Classic is hard-drive-based ; the iPod Touch features a touch screen; the iPod Nano is video-capable; the iPod Shuffle does not include a screen; the iPhone includes calling capabilities. Some iPod models appear visually similar. If you're unsure which iPod you have, you can identify your iPod here.

How to fix an iPod that is frozen?

Reset the iPod. If your iPod is frozen and unresponsive, the quickest and most common fix is to perform a reset. This will reboot the iPod and start the operating system over. Resetting your iPod will not cause any loss of data.

How to restore iPod to iTunes?

Before restoring the iPod, make sure that you back up your data and settings first. Click the "Back Up Now" button in the iTunes Summary page to backup your iPod to either your computer or to iCloud. Click the "Restore iPod" button to begin the Restore process. The restore process can take several minutes to complete.

How to check if iPod is old?

Check the Hold switch. If the Hold switch is toggled on, your iPod will not accept any input. Check the Hold switch, and toggle it on and off a few times, before you move on to more complex solutions. Check the battery. As your iPod gets older, its battery life will begin to shrink considerably.

How to backup iPod to computer?

Connect your iPod to your computer and open iTunes. Make sure that you have the latest version of iTunes installed. If your iPod does not show up in iTunes when you plug it in to your computer, you will need to put it into Recovery Mode first. Backup your iPod.

How to get moisture out of iPod?

Bury the iPod in rice. While the most effective way to remove the moisture is to put the iPod into a bag of silica gel packets, most people don't have these handy. Instead, put your iPod into a bag or bowl full of rice and make sure it is completely covered. The rice will draw the moisture out of the device over time.

How to reset an iPod Touch?

To reset an iPod Touch, press and hold the Power and Home buttons for about 10 seconds until the Apple logo appears. To reset a classic iPod, press and hold the Menu and Select buttons for about 8 seconds until the Apple logo appears .

Why is my iPod displaying folders?

Determine if the hard drive is the problem. If your iPod is displaying a folder icon for the error, then it is having difficulties accessing the hard drive. Oftentimes, this is caused by an ill-fitting hard drive. Luckily, securing the drive is fairly straight-forward.

How to restore iPod to iTunes?

The iPod MUST BE booted into Disk Mode to be able to complete a restore in iTunes. Double check that you've done this. Boot into Disk Mode THEN boot iTunes THEN plug your iPod in to the pc. You should be able to do a restore once it detects (like I said in the main post, the iPod will probably only half detect).

How to clean an iPod?

2: In the box that opens you should see some options, UNCHECK Quick Format and make sure that it's going to format it as FAT32, then click Format. This will scrub your iPod clean, replacing the filesystem entirely.

What to do if iTunes doesn't detect iPod?

If iTunes doesn't detect an iPod AT ALL then reset your iPod and repeat steps 2 & 3 until it does. 4: Now your iTunes should display your iPod or an iPod just call IPOD, click on your iPod and restore, you can use the same version software or update - it doesn't matter.

How to test hard drive on iPod?

1: (optional) Check your iPod by reseting it and when the apple logo first appears hold the middle select button and the rewind button to enter a diagnostic mode. Then press the menu button to enter manual testing. Scroll down to IO and press select, then select the hard disk option, then select the hard disk specs option.

Does the iPod have a fat32 filesystem?

The problem is that the iPod uses a FAT32 filesystem which is a 'kind of unstable' but not yet redundant filesystem we used back in the Windows 98 days, I assume it uses this filesystem for compatability reasons as pretty much any pc with Windows 98 or above can access FAT32.

What is Apple certified repair?

Apple-certified repairs are performed by trusted experts who use genuine Apple parts. Only Apple-certified repairs are backed by Apple. Whichever option you choose, you’ll get your product back working exactly the way it should.

What is an independent repair provider?

Independent Repair Providers have access to Apple genuine parts and repair resources. Independent Repair Providers do not provide repairs covered by Apple's warranty or AppleCare plans* but may offer their own repair warranty. *Unless required by law, repairs made by Independent Repair Providers are not backed by Apple.

Can you do more than shop and learn in an Apple Store?

You can do more than shop and learn in an Apple Store. Start a repair request below to make a reservation with a Genius to get help with a hardware repair.

How to Repair iPod Classic Hard Drive?

We're going to guide you through the process of fixing your hard drive depending on what problem you're facing. Some of the faults we'll look at the hard drive data loss, data corruption, and a bad hard drive.

How to recover iPod data?

Download and install Recoverit to your Mac or Windows computer. Then connect the iPod hard drive to the system and select storage of lost data. You'll choose the connected iPod hard drive this time.

Why does my iPod say "Use iTunes to restore"?

If your iPod displays the text 'Use iTunes to restore', it means your software is corrupted. Apple gives you instructions to fix the problem. It will cause data loss, though. Although, this could also be caused by a hard drive failure. If all else fails, you need to replace your hard drive. 2.

Why is my iPod not switching on?

Try to do a system restore first. You know it's a hard drive problem if that doesn't work. It's caused by the hard drive being bad or poorly connected.

What does it mean when your iPod is sad?

You saw this above when we mentioned the sad iPod image. If you see that, it could mean you have a bad iPod Hard Drive. You should diagnose the problem to see if there is disk failure. If there is, you need to replace the hard drive.

What are the problems with my iPod?

What Are the Problems with Your iPod Hard Drive? As you know from our introduction, iPod hard drives can have many problems, which may cause audio or video corruption. It's good to know the specific problems you may face. If you read our guide below, you'll have a good idea.

How to get Apple logo on screen?

Hold the menu button and the click wheel down for a few seconds. The Apple logo should appear on the screen. Once you see it, press and hold the middle button and play/pause. The issue may be solved. If it isn't, move to the next step.

How much does it cost to repair or replace my AirPods?

If you need service for your AirPods or Charging Case, there's no charge if the issue is covered under the Apple One Year Limited Warranty, AppleCare+, or consumer law.

How long is the warranty on AirPods?

The Apple Limited Warranty covers your AirPods and the Apple-branded accessories that come with them against manufacturing issues for one year beginning on the purchase date. You may also have consumer law rights.

How long is Apple warranty?

We guarantee our service, including replacement parts, for 90 days or the remaining term of your Apple warranty, whichever is longer. We offer this when you get service from us or from an Apple Authorized Service Provider. This is in addition to rights provided by consumer law.

Does Apple warranty cover AirPods?

The Apple Limited Warranty doesn’t cover wear from normal use. If you have AppleCare+ for Headphones, it offers replacement coverage if your AirPod or Charging Case battery holds less than 80 percent of its original capacity. AirPods. Covered by AppleCare+.

Does AppleCare cover repairs?

You can check your coverage status online and update your proof-of-purchase information if there's an error in our records. If our warranty, your AppleCare plan, or consumer law don't cover your repair, you'll pay out-of-warranty fees.

Can AirPods Pro be replaced?

AirPods Pro ear tips. If your AirPods Pro ear tips have an issue that’s covered by the Apple Limited Warranty, they can be replaced for no charge. Contact Apple Support. If you lose them or you want extra ear tips, you can buy two new pairs of ear tips through the Apple Online Store.

What to do if AirPods aren't working?

If an AirPod still isn't working, reset your AirPods.

How to test AirPods?

If there's no sound in one AirPod 1 Make sure that your charging case is fully charged. 2 Place both AirPods in your charging case and let them charge for 30 seconds. 3 Open the charging case near your iPhone or iPad. 4 Check the charge status on your iPhone or iPad to make sure that each AirPod is charging . 5 Put both AirPods in your ears. 6 Play audio to test both AirPods. 7 If an AirPod still isn't working, reset your AirPods.

How to check if AirPods are charging?

Check the charge status on your iPhone or iPad to make sure that each AirPod is charging . Put both AirPods in your ears. Play audio to test both AirPods. If an AirPod still isn't working, reset your AirPods.