Repairing Guides

how to repair aquarium filter motor

by Ms. Harmony McCullough I Published 3 years ago Updated 2 years ago
image

The solution to a clogged motor is fairly simple. Just open up the filter, take it apart piece by piece, and unclog it. If you need to, you can use your hands, use lightly compressed air, or if the motor itself is water proof, just blast some water through the motor.

Full Answer

How do I make my fish tank filter quieter?

A Few More Hacks to Make Your Fish Tank Filter Quieter #1 — Clean Your Filter. While you mainly get an aquarium to keep fish, you also want to add decorations for better... #2 — Lubricate Moving Filter Parts. Filter like any other mechanical units have several moving parts that might need... #3— ...

How do you clean the inside of a water filter motor?

All you have to do is take apart the filter and clean the motor of any debris inside. If your filter motor is waterproof, you can just run the component under a powerful jet of water. You can also use compressed air or a small cleaning brush.

How do fish tank filters work?

You see, fish tank filters use something called an impeller that is motor operate. This impeller serves to suck water from your fish tank into the intake tube, through the filter media, and back out the other side in the form of perfectly clean water.

What does the impeller do on a fish tank filter?

This impeller serves to suck water from your fish tank into the intake tube, through the filter media, and back out the other side in the form of perfectly clean water. The most common issue when there is no suction in the filter is that there is a clog somewhere along the line.

image

How do you fix a motor filter?

1:343:40How To Fix Broken, Stopped, Rattling, Noisy Filter Pump in Aquariums and ...YouTubeStart of suggested clipEnd of suggested clipWhat you basically need to do is remove this and give it a clean or if it's broken replace. It it isMoreWhat you basically need to do is remove this and give it a clean or if it's broken replace. It it is a wearable part and replacements are necessary from time to time.

Why is my aquarium motor not working?

Fish tank filters can stop working for a number of reasons, including a clogged motor or intake tube, faulty components, unplugged wires, missing parts, and more. Here are some signs to look out for if you suspect your fish tank filter has stopped working or isn't doing its job properly.

How do you unclog a fish tank filter motor?

Turn off the power to the filter at the mains.Syphon some aquarium water into a bucket.Place the filter canister in the bucket of water.Clean the canister with your aquarium algae pad.Remove the powerhead from the canister filter body.Remove the dirty sponges from the canister.More items...

Why did my aquarium pump stop working?

0:042:36Why Is Your Filter Not Pumping Water? | Aquarium Care - YouTubeYouTubeStart of suggested clipEnd of suggested clipSometimes when people do maintenance they accidentally plug their filter into their light timer. SoMoreSometimes when people do maintenance they accidentally plug their filter into their light timer. So the filter could be on the same timer as a light and it could be off. So look for the obvious.

How long can a fish tank go without a filter?

A fish live without a filter for a maximum of seven days and a minimum of three days. A filter helps clean the water over and over again, so the toxins in it don't settle down.

How can I make my aquarium filter without a pump?

Different Methods to Make an Aquarium Filter Without a PumpSponge Filter Method. This type of filter is inexpensive, easy to make and can be used with any aquarium without a pump.Bottle Filter Method. ... Angled Filter Method. ... Aquarium Siphon. ... Bubbling Filter Method. ... Bio-Wheel Filter Method. ... Garden Hose Water Filter Method.

How do you clean a fish filter pump?

1:555:25How to Clean your Aquarium Filter - YouTubeYouTubeStart of suggested clipEnd of suggested clipEvery one to two months wring out your sponges. And a bucket of aquarium water make sure to get allMoreEvery one to two months wring out your sponges. And a bucket of aquarium water make sure to get all the gunk out our objective is to remove the waste. And keep the bacteria. Intact. Every six months

How do I clean my aquarium pump with vinegar?

3:266:10Vinegar Cleaning: Aquarium Equipment - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust do a vinegar bath get a large enough bucket. And place vinegar in the bucket. It's up to youMoreJust do a vinegar bath get a large enough bucket. And place vinegar in the bucket. It's up to you how much vinegar you want to use I wouldn't go any less than one part water one part vinegar.

How do I know if my fish tank pump is working?

How to Know if My Internal Aquarium Filter Is BrokenWater Stops Moving Through the Filter. If the motor is humming but no water is moving, the motor works but the filter itself has shut down. ... Filter Rattles When Turned On. ... Dirty Parts Inside the Filter. ... A Crack in the Facade. ... Suction Cups Missing. ... A Word About Cleaning.How to Know if My Internal Aquarium Filter Is Broken - Pets on Mom.comhttps://animals.mom.com › internal-aquarium-filter-broke...https://animals.mom.com › internal-aquarium-filter-broke...Search for: How do I know if my fish tank pump is working?

Why isn't my Aqua Tech filter working?

A) Be sure there is water in the pump chamber -- if you don't add water to the pump chamber, the filter will pull in air. Also, take care with how much water is in the aquarium. Most filters need the water level to be about 1” from the lip of the filter, and a shallow tank may prevent the filter from working.Aquarium Product Setup FAQs | Aqua-Techhttps://www.aqua-tech.biz › FAQs › Aquarium-Products-S...https://www.aqua-tech.biz › FAQs › Aquarium-Products-S...Search for: Why isn't my Aqua Tech filter working?

How do I know if my fish tank pump is working?

How to Know if My Internal Aquarium Filter Is BrokenWater Stops Moving Through the Filter. If the motor is humming but no water is moving, the motor works but the filter itself has shut down. ... Filter Rattles When Turned On. ... Dirty Parts Inside the Filter. ... A Crack in the Facade. ... Suction Cups Missing. ... A Word About Cleaning.

How do I fix my power head?

0:541:56Power Head Aeration Fix - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust take a little tiny drill. Put it on there nice and tight drill a hole in. Him. Find a littleMoreJust take a little tiny drill. Put it on there nice and tight drill a hole in. Him. Find a little left over screw in a drawer somewhere.

How do I fix my aquarium water purifier?

0:441:54HOW TO FIX AN AQUARIUM FILTER THAT STOPS WORKING!!! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo first we're gonna want to go ahead and remove the motor. This can be located at the bottom ofMoreSo first we're gonna want to go ahead and remove the motor. This can be located at the bottom of most hlb. Filters. So as you can see here the impeller is pretty jammed up and is the obvious. Reason

How do I prime my aquarium pump?

0:431:56EASY TUTORIAL on HOW TO GET YOUR FISH TANK WATER PUMP ...YouTubeStart of suggested clipEnd of suggested clipYou would take a cup of water. And I'll take the water and pull it in the back. This basicallyMoreYou would take a cup of water. And I'll take the water and pull it in the back. This basically Prime's your filter. And you should hear it do that. And that noise was shut off did.

Introduction

If your hang-on-back (HOB) aquarium style filter is making a buzzing noise, has reduced flow, or has stopped working completely, the impeller inside the motor has most likely been chipped or cracked from long-term wear.

Step 3

Twist the motor component outwards away from the filter’s center by 90 degrees.

Step 5

Using tweezers, pull the damaged impeller upwards off the impeller shaft.

Step 7

Swirl the cavity with a Q-tip to scrape off any build up of sand or organic material.

Step 9

Clean the shaft and the cavity with Q-tips dipped in vinegar in a scraping motion.

Step 10

Wipe the shaft and the cavity with a damp paper towel to remove vinegar.

Step 12

Lower the new impeller into the cavity so that the shaft runs through the center of the impeller.

What to do if your fish filter is not adjustable?

If your filter is not adjustable and is too powerful, or is not powerful enough, the only real solution is to buy a different filter that will accommodate the needs of your fish. You might also like our post on finding the right protein skimmer. If playback doesn't begin shortly, try restarting your device.

Why won't my fish tank filter turn on?

This can be due to a number of different reasons. One of the biggest causes of a fish tank filter that just won’t run is a clogged motor.

Why is there no suction in my fish tank filter?

The most common issue when there is no suction in the filter is that there is a clog somewhere along the line.

What is the problem with fish tank filters?

One of the most common problems that people experience with their fish tank filters is that there is a loss of suction, or no suction at all. You see, fish tank filters use something called an impeller that is motor operate. This impeller serves to suck water from your fish tank into the intake tube, through the filter media, ...

Why is a fish tank filter important?

The filter is what keeps the water clean, keeps the bad bacteria at bay, filters out toxins , chemicals, and unwanted compounds, and it helps to oxygenate the water too. It is something that every fish tan absolutely needs to have, and without it, ...

How to get a clogged filter out of a sink?

Search for the clog with your eyes and if you see it then remove it. You can also try using water from your sink to flush it out.

How to unclog a motor?

The solution to a clogged motor is fairly simple. Just open up the filter, take it apart piece by piece, and unclog it. If you need to, you can use your hands, use lightly compressed air, or if the motor itself is water proof, just blast some water through the motor.

When to change your aquarium filter?

During use, there will be many times when your filter encounters problems. But luckily most of the problems you can fix immediately, however, depend on the quality of your filter. There are some situations where you should replace the filter with a new one instead of trying to repair it, like:

How to fix a stuck impeller in an aquarium?

When the filter has a stuck impeller, it will not be able to rotate, so there will be no noise either. Unplug the power, then remove your filter from the aquarium. Open the filter and look for obstructions that interfere with the movement of the propeller. If so, take them out and clean the filter again. With non-removable filters, you can check by blowing with compressed air or water to push out blockages if any. After cleaning the inside of the filter, put the filter back in the aquarium and power it up. If it works properly again then your problem is solved. If not, continue to check the next step.

How does a filter work?

The filter uses a motor that powers the impeller, the impeller rotates to draw water from the tank into a tube, through the filter media, and then back into the tank.

What happens to the filter media during filtration?

During the filtration process, the filter media will retain the dirt, debris to clean the water.

Can an aquarium filter regulate flow rate?

This problem will be solved very simply if your aquarium filter has a function to regulate the flow rate. You just need to adjust to the speed you want.

Can gravel get sucked into aquarium filter?

This problem often occurs in aquariums that use a substrate of sand, gravel, or small rocks. They can easily get sucked into the filter causing clogging or damage to the impeller.

Can you replace an impeller in an aquarium?

In many types of filters, the impeller is a replaceable part when damaged. However, if your filter is among the rest or you cannot afford another propeller then you will have to consider purchasing a new filter for your aquarium. Do not try to replace with a fan of a different filter because that will only waste your time.

Why is my water filter emphatic?

If your filter is more emphatic than that, then it most likely has a problem either with the water flow or one of the moving parts inside the unit.

Why does my filter pump make a rattling noise?

This is mostly created by obstructions such as dirt and grime , and if left unresolved, can result in filter pump burn-out. A good cleaning should reduce this noise. On the flip side, a broken filter part will cause more of a rattling noise and vibrations as opposed to buzzing or humming sounds.

What does an aquarium sound like?

Sometimes, it’s an electric buzz from the filter or pump that sounds like a high pitched generator hum effortlessly grating on your nerves.

What noise can you expect from a filter?

The other characteristic noise you can expect to get from your filter is bubbling sonances, especially with sponge units.

Why is my aquarium waterfalling?

You may also need to come up with a top-up schedule because water evaporates from aquariums quite rapidly; lowering the water level and causing the loud waterfall effect.

What fish species are in an aquarium?

You’ll find hacks and insight on common aquarium fish species such as betta, cichlids, tetras, guppies, danios, barbs, gouramis, goldfish, mollies, platies, killifish and more .

Why does my fish tank make a splashing noise?

Usually, the splashing noise is more when the water level is too low, causing the water to fall a longer distance than is ideal. Thus, raise the water level in your fish tank to just below the top surface to lessen the sound.

How To Fix Top Fin Filter That Is Not Working?

The first step you have taken to fix any problem is identifying the problem behind it. So if you have found out the reason, there are solutions:

How Do You Adjust a Top Fin Filter?

As you already know, different fish species need different water flow levels. Some can survive in any water flow, whether some may face difficulties swimming or feel dizzy in full force flow. So you have to adjust the filter accordingly.

Should the Top Fin Filter Be Open Or Closed?

Open or closed, you can use it either way according to your preference.

Conclusion

Addressing a problem is half of the solution. After reading this article, we hope it will be easy to find the causes why the Top Fin filter is not working. Also, you can sort out the problems instantly.

Water Leaks

Water leaks are one of the potential issues you might encounter when running a canister filter. Serious leaks are not that common. If you invest your money in a high-quality filter, most leaks will be because of user error.

Impeller Problems

The impeller is a moving filter component located inside the pump. It controls the water flow in the tank by creating a centrifugal force. As the impeller rotates, the movement it creates helps the water push through. Sometimes, the impeller might get clogged, damaged, or overheated.

Motor Problems

The motor is the filter component that sets everything else in motion, including the impeller. If the motor is damaged, the filtration rate in the aquarium will be affected even if all other filter components are completely fine. Sometimes, the motor might stop running altogether.

Clogged Tubes

The tubes help the canister filter circulate water in the aquarium. The problem is that they can get clogged, just like any other component of the filter that’s submerged in water. But because the tubes are static, unlike the motor and the impeller, sediments can deposit a lot easier inside the tube lining.

Noise Problems

The average aquarium filter emits a continuous electric humming sound. It might seem distracting at first, but it just blends in with any other background noise in the house, such as computers, refrigerators, and so on. But when the filter isn’t working properly, the noise might become a problem.

Conclusion

Most problems you might encounter in canister filters have to do with user error. Poor maintenance and poorly installed components are usually the most probable culprit. Whether we’re talking about impeller, motor, or noise problems, the first thing you should do is clean your filter thoroughly.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9