How to Fix ‘Bad System Config Info’ Error in Windows 10
- Check your RAM and Hard Drive. For some, it may seem daunting to look inside your PC and start twiddling around with the physical components.
- Update or Reinstall Drivers. Incompatible or outdated drivers are a source of several issues. ...
- bcdedit command. Quite often the Bad System Config Info error can appear when system configuration is incorrect or not configured properly.
- Fix BCD file. If your BCD file is corrupt or damaged, the Bad System Config Info error may appear and deny you access to Safe Mode and Windows 10 altogether.
- Fix the Registry. Boot from the Windows 10 installation DVD. Select “Troubleshoot -> Advanced Options -> Command Prompt.”
- System Restore. If the other methods don’t help, this may be one of your last two solutions to try. Click Start. Click Power.
- Reset Windows 10. This is the last solution to try if none of the others worked. ...
What is a bad system configuration?
The bug check error can also be caused by:
- faulty hardware
- incorrect system settings
- a bad driver
- installing an important update
How to fix bthusb.sys issues?
How to fix BTHUSB.SYS errors in just few steps?
- Scan your computer for any malicious software. Windows files are commonly attacked by malicious software that prevents them from working properly. ...
- Update your system and drivers. Installing relevant Microsoft Windows patches and updates may solve your problems related to BTHUSB.SYS file.
- Use System File Checker (SFC) tool. ...
- Restoring Windows system. ...
How can I fix "bad module info" error?
How to Fix Bad_Module_Info Error in Windows 10 Fix 1: Try to Change the Virtual Memory Value If you are running Windows 10 (v1709) on an SSD then you can easily change the virtual memory. This will stop the bad_module_info error message from popping up.
How to fix operating system not found error?
Tutorial to Fix the Problem Operating System not Found on Windows
- Part 1: Operating System Not Found? Why?
- Part 2: Check If Hard Drive Is Detected by BIOS
- Part 3: Test the Hard Disk
- Part 4: Reset BIOS
- Part 5: Rebuild Master Boot Record
- Part 6: Set Correct Partition Active
- Part 7: Recover Lost Files from a Missing Operating System
How do I fix bad system configuration information?
Here are the five Bad System Config error fixes in order:Restart your system.Run SFC and CHKDSK.Restore the Windows Registry.Use System Restore to fix the Windows Registry.Fix boot configuration data (BCD)
What causes bad system config?
Bad System Config Info is a common bug check error on Windows systems, caused mainly by a malfunctioning of the system and registry files or the Boot Configuration Data (BCD) file. Some boot order files in the BCD, or even some older ones, may conflict with newer, stable files.
How do I fix bad system config information with USB?
How do I fix the BAD SYSTEM CONFIG INFO BSoD error?Insert the bootable DVD or USB flash drive and boot your PC from it. ... Click on Next and then click on Repair your computer.Choose Troubleshoot.Then Advanced Options, and select Command Prompt.More items...•
How do I fix bad system information in Windows 8?
Table of Contents:Fix #1: Restart the computer.Fix #2: Run SFC and CHKDSK to repair corrupt system files.Fix #3: Repair BCD.Fix #4: Fix damaged Windows Registry.Fix #5: Check and repair bad sectors.Fix #6: Update device drivers.Fix #7: Check RAM.Fix #8: Reinstall/restore/reset Windows.
Is bad system config info fixable?
The Bad System Config Info error is one of the most frequent “blue screen of death” errors on Windows 10, 8, and 7. It is a bug check error message that tells you Windows has trouble processing something. Finding the culprit is usually the hard part, but it is often an easily fixable issue.
How do I fix Windows SYSTEM32 Config system?
Fixing “\WINDOWS\SYSTEM32\CONFIG\SYSTEM is missing or corrupt” on WindowsDownload Easy Recovery Essentials. ... Burn the image. ... Boot up your PC from the Easy Recovery Essentials CD or USB you created.Once EasyRE is running, choose the “Automated Repair” option and click Continue .More items...
How do I fix blue screen of death Windows?
Uninstall conflicting apps If you have an app causing compatibility problems, the Blue Screen of Death is likely to happen randomly, or every time you launch the program. You can get around this problem by downloading and installing the latest version of the app from the software support website.
How do I get rid of the blue screen on Windows 10?
Check for Windows and Driver Updates Visit Settings > Update & Security > Windows Update and apply any pending updates, just in case they hold the fix. It's also important to check your drivers, since they can often be a source of Windows 10 blue screens.
How can I boot from USB?
How do I boot from USB in the BIOS?Turn on your computer and press Delete, F2, F10 or F11.The BIOS should appear.Use the cursor keys to navigate.Find the Boot menu.Change the order so USB is at the top of the list.
How do I get to bios from command prompt?
How to open CMD during Windows Setup using the Shift + F10 keyboard shortcut. In our opinion, this is the best method of opening Command Prompt at boot, and that's why we're showing it first. You can do it immediately after UEFI/BIOS POST, and it works no matter what Windows version you have installed on your PC.
Why does my PC keep failing to reset?
One of the most common causes for the reset error is corrupted system files. If key files in your Windows 10 system are damaged or deleted, they can prevent the operation from resetting your PC. Running the System File Checker (SFC scan) will allow you to repair these files and attempt to reset them again.
How can I repair my Windows 10?
Use a fix-it tool with Windows 10Select Start > Settings > Update & Security > Troubleshoot, or select the Find troubleshooters shortcut at the end of this topic.Select the type of troubleshooting you want to do, then select Run the troubleshooter.More items...
What does bad system config mean?
Windows 10. This error means that something is wrong with the registry on your PC and you'll need to return to a previous configuration. Turn off your PC by pressing and holding the power button, then turn it back on. When you see your PC manufacturer's logo, turn the PC off again.
Why does my PC keep failing to reset?
One of the most common causes for the reset error is corrupted system files. If key files in your Windows 10 system are damaged or deleted, they can prevent the operation from resetting your PC. Running the System File Checker (SFC scan) will allow you to repair these files and attempt to reset them again.
How do I fix blue screen of death Windows?
Uninstall conflicting apps If you have an app causing compatibility problems, the Blue Screen of Death is likely to happen randomly, or every time you launch the program. You can get around this problem by downloading and installing the latest version of the app from the software support website.
How do I get rid of the blue screen on Windows 10?
Check for Windows and Driver Updates Visit Settings > Update & Security > Windows Update and apply any pending updates, just in case they hold the fix. It's also important to check your drivers, since they can often be a source of Windows 10 blue screens.
3 Effective Methods to Fix Bad_Sysytem_Config_Info
The Bad System Config Info blue screen error could be caused by different reasons. This guide is covering 3 different effective and easy methods fo...
Method 1: Update All Your Available Drivers
Many blue screen errors are blamed on outdated, corrupted or missing device drivers. BAD_SYSTEM_CONFIG_INFO is no exception. You probably can solve...
Method 2. Fix Your BCD File
This error could be also caused by the demaged BCD(Boot Configuration Data) file. So if your Win 10 can’t enter safe mode to fix the error, be sure...
Method 3. Fix Your Windows Registry
This problem can also due to the incorrect registry settings. To fix your Windows Registry:NOTE: It needs a Win 10 installation flash drive to try...
What Causes Bad System Config Info Error Code
Some computer users report that they have encountered bad system config info error and this error will cause blue screen and prevent them to boot up computer (there are other causes to blue screen, click here to know more).
Fix 1. Troubleshoot Hardware Issues
Please make sure all cables and hardware components are connected correctly. Then, you should check RAM and hard drive for errors. Here is the guide:
Fix 2. Uninstall Applications and Updates
Some users report that the BAD_SYSTEM_CONFIG_INFO error appears after they install a new application or Windows update. In this case, the reasonable cause should be incompatibility problem. So, uninstalling the problematic application or update may solve this problem.
Fix 3. Update Drivers
Press " Windows + X " keys and select Device Manager in the pop-up menu.
Fix 4. Use BCDEdit Command
Windows 10 bad system config info error may occur due to incorrect system configuration like improper number of processors and wrong memory amount value. Some users report that the computer will overheat if the number of processors is very large, which will cause BAD_SYSTEM_CONFIG_INFO error sequentially.
Fix 5. Fix Windows Registry
Windows registry is an important database in Microsoft Windows for storing settings information of system and application. The various parameters stored in registry control directly the startup of Windows, the loading of hardware drivers, and the operation of some Windows applications.
Fix 6. Bootrec Command
If the BCD files get corrupted, bad system config info error may also occur. Bootrec.exe is a computer program file that can be used in WinRE Command Prompt to solve and repair Master Boot Record (MBR) issue, boot sector issue, and Boot Configuration Data storage issue. But this tool requires you to enter WinPE .
What is persistent bad system configuration info?
A persistent Bad System Config Info error can point to a corrupt file system. At times, important Windows system files can become corrupt, in turn causing an issue. The Windows System File Check (SFC) is an integrated Windows system tool you can use to check for errors.
How to restore health in Windows 10?
Type Command Prompt (Admin) in the Start menu search bar, then right-click and select Run as administrator to open an elevated Command Prompt. Type the following command and press Enter: DISM /online /cleanup-image /restorehealth. Wait for the command to complete.
What is a CHKDSK?
CHKDSK is another Windows system tool that checks your file structure. Unlike SFC, CHKDSK scans your entire drive for errors, whereas SFC scans your Windows system files specifically. Like SFC, you can run the CHKDSK scan from the Command Prompt to fix your machine.
Method 1: Update all your available drivers
Many blue screen errors are blamed on outdated, corrupted or missing device drivers. BAD_SYSTEM_CONFIG_INFO is no exception. Updating drivers should always be your go-to option when something goes wrong with your computer or system.
Method 2: Fix your BCD file
This error could be also caused by the damaged BCD (Boot Configuration Data) file. So if your Win 10 can’t enter safe mode to fix the error, be sure to try to fix the BCD file.
Method 3: Fix your Windows Registry
This problem may also be triggered by the incorrect registry settings. To fix your Windows Registry:
Why is my system config info error?
The faulty hardware, like RAM or a bad hard drive, can trigger the bad system config info error. So, you can first check the computer hardware and memory. In this case, you can use Windows native tool-Memory Diagnostic to run memory tests on your Windows 10 PC.
How to restart a PC?
Note: the following steps are based on the precondition that your PC can restart. Step 1. Click “Start” button, type “device manager” in the “Search” file and press “Enter” to open the device manager. Step 2.
How to fix bad system config info?
If all those above cannot fix the Bad system config info error, you have to try one of these: 1 Restore Windows to a previous working status 2 Reinstall Windows 10 3 Reset your PC
Why does my computer keep saying "BSOD stop"?
The BSOD stop error tends to occur when drivers on your computer are corrupted, outdated or not compatible with devices. Hence, you can try updating drivers to make sure the BAD_SYSTEM_CONFIG_INFO problem has nothing to do with drivers.
What happens when Windows 10 fails to boot?
Generally, when your Windows 10 fails to boot, the automatic repair will be launched by computer to repair Windows errors. You can also get the repair manually via following steps:
How to backup Windows system with DiskGenius?
With DiskGenius Free Edition, you can backup & restore the Windows system easily, as follows: 1. Select the Windows system partition (C: partition in common), then right-click it and select "Clone Partition To Image File", as follows: 2. Select a location to save backup image and name it, and click Start button.
Symptom
When you use Boot diagnostics to view the screenshot of the VM, you'll see that the screenshot displays the Windows stop code #0x00000074 or BAD_SYSTEM_CONFIG_INFO.
Cause
The BAD_SYSTEM_CONFIG_INFO stop code occurs if the SYSTEM registry hive appears to be corrupted. This error can be caused by any of these reasons:
Solution
If you have a recent backup of the VM, you may try restoring the VM from the backup to fix the boot problem.
How to fix a computer that is not spinning?
Start by restarting your PC and pressing F8 before the spinning icon or interrupting the start-up process at least twice to run automatic repair. Once the boot troubleshooting menu appears, select Advanced options. Select Troubleshoot in the Choose an option menu. Select Advanced options in the Troubleshoot menu.
How to run troubleshooting tool?
To launch the Windows Troubleshooter, right-click the Start menu and select the Settings option. In the Windows Settings menu, select Update & Security > Troubleshoot > Additional troubleshooters.
How to update Windows 10?
To start, open Windows Settings by right-clicking the Start menu and selecting Settings from the pop-up menu. In the Settings menu, select Update & Security. Windows will automatically begin searching for new updates. If it doesn’t, select Check for Updates. Otherwise, select Download (or Download and Install) to begin downloading ...
