There are some instructions for you that should be followed while repairing your Bakflip tonneau cover:
- Remove the four bolts that hold the tonneau cover in place.
- Take off the tonneau cover and set it aside.
- Inspect the damage to see if it can be repaired or if it needs to be replaced.
- If the damage is minor, such as a small hole or tear, you can repair it...
Full Answer
How do I care for my Bak flip tonneaus?
BAKFLIP MX4, BAKFLIP G2, FIBERMAX AND F1 BAK Flip tonneaus are made from durable materials and require simple care to ensure a long life of performing well and looking great. CLEANING THE TOP (WASHING) Standard automotive soap and water with a soft sponge or cloth is recommended for cleaning.
What is the replacement latch bar for the bakflip bed cover?
BAKFlip replacement latch bar comes in three different part #'s for your BAKFlip truck bed cover assembly. Fits: BAKFlip F1, BAKFlip G2, BAKFlip HD, BAKFlip FiberMax, BAKFlip VP, BAKFlip MX4, BAKFlip CS, BAKFlip CS-F1
What should I do if my tonneau cover is damaged?
If a seal is damaged or missing, you must replace or repair the tonneau cover as soon as possible to prevent further damage or the cover wearing out faster than it should. If a tonneau cover seal is damaged or has fallen off, the cover can flip hence allowing air, dust, and water to penetrate and damage the hard retractable cover further and faster
What are the most common tonneau cover problems?
The most common tonneau cover problems originate from damage, wrong fitting, wearing out due to age, frequent use for prolonged periods, and using the incorrect size for your vehicle. These problems often result in leaking, flipping and sometimes the cover may stick to the truck bed.

How do you fix a tonneau cover?
1:372:55How to fix a rip in your soft vinyl truck bed cover - YouTubeYouTubeStart of suggested clipEnd of suggested clipOn the top to go across. And then I fastened it on with the e6000 glue right. So you're transparentMoreOn the top to go across. And then I fastened it on with the e6000 glue right. So you're transparent glue. You can see it's used for many things but it dries more like it dries like shoe glue.
How do you fix a leak in a tonneau cover?
How do you fix the leaks on your Tonneau cover?Water Pipe Insulation. One of the most used standard solutions for this problem is insulating water pipes. ... Extra Seals If the leaks are kept to a minimum, then additional seals are the one for you! ... Bed Seal Kits.
Does BAKFlip have a warranty?
BAK has a 1 year limited warranty on all products and a 2 year limited warranty on BAKFlip HD and F1. BAK's warranty covers factory caused damage and not damage caused by consumer or by random acts of nature.
Does the BAKFlip MX4 leak?
Yes, I had a lot of metal shavings and leakage on my new MX4, along with some other QC issues.
How do you make a tonneau cover watertight?
How To Waterproof a Tonneau CoverWater resistant seals that stick along the sides of the tonneau. These are usually included to fit in areas where the tonneau may leave a small gap, so be sure to install them carefully. ... Drain tubes that help channel water off the cover or away from the bed rails.
What do you use to seal a tonneau cover?
3:435:38How to Replace the Seals on Your Tonneau Cover - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse our Loctite superbond er 495 to glue the ends. Together making a right angled corner. For bestMoreUse our Loctite superbond er 495 to glue the ends. Together making a right angled corner. For best results just place the glue on only one of the sides then carefully press them.
Where is BAKFlip located?
Springfield, MissouriWhere is BAKFlip made? BAK Industries is proud to produce all of truck bed covers in the USA at our manufacturing facility in Springfield, Missouri.
Where is serial number on BAKFlip mx4?
The serial number is located under the rear bar on the passenger side of the cover, starting with a letter and followed by a seven-digit number.
Where is the serial number on BAKFlip g2?
LOT Code / Serial # can be found on the product, box label, or receipt.
How do you waterproof a Bakflip tonneau cover?
0:423:58BAKFlip** Truck Bed Cover Waterproof Hard ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipSafe highway speeds will not push this down at all so super secure super snug. And we'll show someMoreSafe highway speeds will not push this down at all so super secure super snug. And we'll show some pictures of the drain system. And talk about waterproofing in just a minute but this is how it works.
How secure is Bakflip MX4?
The Bakflip MX4 is made out of light but durable aircraft grade aluminum that's durable and offers a secure fit onto the tailgate that provides great security against theft. It's hard cover panel prevents anyone from taking a peek inside your truck bed providing a safe place to store items inside.
How do you seal a truck bed?
0:011:17TRAILSEAL® Tailgate Gasket Install Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipLine from side to side start 1/2 inch beyond the corner. And stop 1/2 inch beyond the corner at theMoreLine from side to side start 1/2 inch beyond the corner. And stop 1/2 inch beyond the corner at the other end apply continuous pressure along the entire seal to ensure maximum adhesion.
How do you seal a truck tailgate?
1:054:03How to Install Extang MaxSeal Tailgate Seal - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then we're going to put a seal right down against the bed of the truck with the tape adhesiveMoreAnd then we're going to put a seal right down against the bed of the truck with the tape adhesive part right to the edge.
Why does my tonneau cover keep popping up?
Cause: Latch pops out when it is not properly locked. Solution: Press down on cover and to fully lock latch. (should be a clicking sound) Cause: Shifting of side rail over time may offset latch positions. Solution: Realign the side rails to improve latch grip.
What is the purpose of a tonneau cover?
A tonneau cover in current automotive terminology is a hard or soft cover that spans the back of a pickup truck to protect the load or to improve aerodynamics. Tonneau covers come in many styles that fold, retract, or tilt open, and can be locked shut.
How to tell if tonneau cover needs repairing?
Thus, properly inspect the seal and trace out the problem. The levels should be even, and the seal should provide a proper grip. Now, if you find any issue in the seal, it is an indication that your tonneau cover needs a repairing job. You can either work it out yourself or get it done by some professional. If you want to do it yourself, I would suggest you watch some videos to learn.
Why does my tonneau cover flap?
Flapping is another common issue faced in soft tonneau covers. It is mostly due to the low tension of the cover. Well, it’s not a big deal. You can eliminate this issue instantly by adjusting the tension controls of the cover. These are usually on the sides of the tonneau cover.
What happens if you don't act properly on your truck bed?
Because if you do not act properly on it, weather conditions will affect your truck bed. By that, I mean dust, water, and air can penetrate to damage your tonneau cover.
Why does my tailgate cover have slanty edges?
A tailgate cover seal works to cover the sides and along the bottom of the tailgate. This seal effectively prevents moisture. Also, slanty edges help very efficiently against moisture.
Why do trucks need tonneau covers?
A tonneau cover also improves the mileage of your truck by improving its aerodynamics.
How to clean a tear in a swab?
First of all, you have to clean all the area around that small tear. You can use soap and water with some rag and alcohol on the s wab after that.
Can a tonneau cover make a noise?
In case you hear those noises, you should instantly check the fitting of your tonneau cover. Troubleshoot it as soon as possible until it gets resolved. Moreover, large-sized tonneau covers can also cause noises. So, beware of it as well.
How to prevent tonneau cover from leaking?
To prevent your tonneau cover from leaking, you should use a tailgate cover seal that covers both the gap along the bottom and both sides of the tailgate. The tail seal is very efficient in preventing moisture and shutting the dust out. You should always inspect the front bulkhead or the front of the truck bed to ensure it is not at ...
What to do if a tonneau seal is damaged?
If a seal is damaged or missing, you must replace or repair tonneau cover as soon as possible to prevent further damage or the cover wearing out faster than it should.
How to check if truck bed cover is installed correctly?
If the size is right, you should check whether the cover is installed correctly. If the installation is correctly done, then check the seal and the hardware. You should also ascertain that nothing came loose or even damaged when purchasing. A defect could be making the cover to pull away in certain truck bed regions.
Why are tonneau covers important?
Tonneau covers are very important for they protect the truck bed and its contents from water, sunlight, corrosion, paint damage, dust, and heat. While it is not uncommon to come across several tonneau cover problems, these tips can help you to fix these issues immediately you spot them.
Why won't my tonneau open?
When your tonneau cover won’t open or becomes stuck, there could be some rust in the opening mechanism. Apply some lubrication to these areas and check to see if there is some damage or general depreciation due to age and frequent use. Consider checking out our post about opening different tonneau covers.
Why do truck bed covers have slanting?
A slanting effect helps water to drain from the covers. If these parts are on the same level, you can add extra foam to the front section of the truck bed.
Why is my tonneau cover bad?
So, what are some of these problems that you should be wary of if you own a tonneau cover? The most common tonneau cover problems originate from damage, wrong fitting, wearing out due to age, frequent use for prolonged periods, and using the incorrect size for your vehicle.
BAKFLIP MX4, BAKFLIP G2, FIBERMAX AND F1
BAK Flip tonneaus are made from durable materials and require simple care to ensure a long life of performing well and looking great.
REVOLVER X2, and X4
These stylish covers incorporate OE marine grade vinyl laminated on the top surfaces. Standard automotive soap and water used with a soft sponge or cloth is recommended for cleaning. Shammy dry to prevent water spots and ensure a rich dark finish.
GENERAL MAINTENANCE & LUBRICATION
It is recommended that you periodically check your cover is securely attached to your truck bed. Inspect the clamps and front mounting bolts to ensure they were properly installed and have not come loose or knocked out of adjustment during operation.
