- Take a fence stretcher and pull wire together to make the repair.
- From each half of the break, you’ll want to remove any barbs, around 6 to 8 inches.
- Slide the wire ends into a fencing sleeve.
- Use a crimping tool to squeeze the sleeve closed. You can also use pliers.
- Separate the wire ends and wrap the wires around the barbed wire. ...
How to mend a barbed wire fence correctly?
Mission Statement
- Be an essential resource for the innovative beef cattle producer.
- Provide content to help all segments of the cattle industry produce successful and healthy livestock.
- Create an open forum for industry discussion and an easy-to-read magazine of expert information about the beef industry.
What are the best ways to cut a barbed wire?
- Cuts bolts, chain, threaded rod, wire, and more up to 5/32-inch wide
- Compound cutting action requires less effort and delivers more force
- Drop forged, hardened alloy steel jaws
- Tubular steel handles with cushioned, non-slip rubber grips
- Lifetime replacement guarantee
How to unroll barbed wire?
Video result for how to unroll barbed wire
- Barbwire unroller ? | Ranchers.net. A one-inch pipe went through all the boards, with pins on each side to keep the pipe from falling out.
- CountyLine 2 in. Receiver Wire Unroller at Tractor Supply Co. Barbed Wire Shop All. Chicken Wire & Poultry Netting Shop All. ...
- Barb Wire Unroller. Easy DIY cheap project for unrolling ... May 7, 2017 - Barb Wire Unroller. ...
How to fix tension wire on a fence?
- Attach the wire to this post using the staples as on the primary post.
- Move your hands down to the edge of it and stretch the wire again by pulling away from the center and away from the previous fence post. ...
- Continue this process until that fence post or piece of the frame is complete, stretching the wire netting and attaching it to your posts.
How do you reinforce a barbed wire fence?
8:2812:54Barbed Wire Fence Repair Tips and Tricks Stretching and SplicingYouTubeStart of suggested clipEnd of suggested clipDown two crimps on each ferrule. If you don't have this tool because I tried it just using viseMoreDown two crimps on each ferrule. If you don't have this tool because I tried it just using vise grips and then you can't crimp them tight enough. And this has the perfect opening and the jaws.
How can I stretch my barbed wire without a stretcher?
0:431:51How to Stretch Barbed Wire Fencing - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a rope fence puller to remove most of the slack in the fence wire attach. The end of your comeMoreUse a rope fence puller to remove most of the slack in the fence wire attach. The end of your come along to the post by wrapping the cable around the post.
How do you tighten sagging barbed wire?
If you're using pliers to tighten your fence, simply grab a section of the loose fencing (between the barbs) and twist the wire 90 degrees. This should make a “z”-shaped dent in your wire, which will add tension to your wire. Continue this process along the length of the wire until it is taught once again.
How do you stretch a barbed wire that has come along?
0:593:49Pulling Barbed Wire with a Maasdam 2 Ton Come Along and Speeco ...YouTubeStart of suggested clipEnd of suggested clipAnd it puts pressure on the wire. So it doesn't go out then you hook that to your come along andMoreAnd it puts pressure on the wire. So it doesn't go out then you hook that to your come along and then you start cranking and come along.
How do you stretch a fence by hand?
4:0117:57Stretch Woven Wire Fence by Yourself – Tips & Tricks - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then just start cranking on this thing so we can get this as tight as possible pull as muchMoreAnd then just start cranking on this thing so we can get this as tight as possible pull as much slack out of it as we can we'll know where we need to clip the end of the fence.
How tight should you stretch barbed wire?
“You want it tight and straight between posts, with no droops, but not so tight that it vibrates when you hit it, like when sinking staples into the brace posts,” he says. If you're playing a tune with your hammer, the fence is tight enough that it might break.
How do I make my wire tighter?
9:1119:38Fencing Like A Pro...Knot tying..Pulling wire tight and more!YouTubeStart of suggested clipEnd of suggested clipStart by going around the post. Go under you can tie this knot either way right side up or upsideMoreStart by going around the post. Go under you can tie this knot either way right side up or upside down it doesn't matter so start by going. Under.
How do you twist barbed wire?
0:165:19Knotting Barbed Wire - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then you're going to start five gentle twists one two three four five and then you're going toMoreAnd then you're going to start five gentle twists one two three four five and then you're going to do five tight twists. One then you can do a little crank handle for this if need be one.
How far can I stretch barbed wire?
Stretching Wire Barbed Wire – Should be pulled taut. In warm weather, a stretch of 100 feet (prior to attaching to posts) should sag no more than 4” in the middle and no more than 2” in cold weather.
How do you tighten a wire fence?
Twist the end of the wire together with the rest of the strand. Pull the loop around the post and fold it over the strand of wire. Push your bolt through the loop. Use the lever to twist the loop around the strand of wire and continue twisting until the fence is tight.
How to fix a broken fence?
Clear Your Work Area. When you locate the area where your fence is broken, take a minute to assess the damage and clear away space to work . This is especially important if you have an electric fence, as live wires touching plants or wooden planks could be dangerous. Give yourself space to work, keep your tools where you can reach them, ...
How to prevent fence issues?
Walk your fence regularly. The best way to prevent fencing issues is to catch them before they happen. If you’re regularly checking your fence for weak spots, damage from predators or weather, fallen staples, or other potential problems, you can intervene before your fence becomes too badly damaged.
What is the tool used to connect two pieces of wire fencing?
Fencing sleeves: also called crimp sleeves, a tool used to connect two pieces of wire fencing. Pliers. Gloves and any other protective equipment.
How to make a fence more secure?
To make your repaired fence even more secure, separate the strands that hang out from either side of the sleeve. Wrap these strands around the barbed wire to further secure them to the fence and keep them from harming any animals (or children) who walk by. With this final step, your fence is officially fixed and ready to guard your property again.
Why is it important to repair a fence?
It’s important to begin repairs as soon as possible – after all, your fence is necessary for keeping your animals in and keeping pests and predators out. But luckily, this sense of urgency doesn’t have to come with a long day’s work, because you can repair a fence in four simple steps:
How to prevent animals from breaking for something nice to graze?
This will prevent the animals from making a break for it in search of something nice to graze. Use electric fencing carefully. If you discover trouble spots in your fencing (areas where damage is frequent), you might benefit from re-fencing that area with electric wire.
Can you replace a section of wire fence?
Replacing Sections of a Wire Fence. Sometimes, the damage to your fence isn’t limited to one piece of wire. In these cases, you may need to replace entire sections of your fencing. The repair process here is very similar, but you need to add more sleeves along each section of the fence. Your fence stretcher will do A LOT of the heavy lifting here, ...
Step 1: Get Loopy
In the location of the split, clear fallen trees and plant-life so you have room to work. If it's an electric fence you'll want to keep plants from touching the line anyway. De-kink the wire and pull it reasonably tight.
Step 2: Stretch Time
No...I didn't mean take a break! I meant we need to use the Fence Stretcher to stretch the fence wire so we can make the repair complete.
Step 3: Let's Wrap This Up
Ok, now we're ready to start cranking the long lever on the Fence Stretcher. Like an old fashioned tire jack, or a come-along winch, each pump of the lever tightens the fence. Be Careful here, these Fence Stretchers can slip and the clamps can lose traction as well...but in general I find this a heavy but very good tool to have for fence repair. Once the fence is tight to your satisfaction, bend the loose splice wire end and create another loop knot. Don't worry if you notice some slack here..we'll fix that next. You can take off the Fence Splicer now, and take out a small amount of slack by using your screwdriver and a random stick or your pliers.
How to repair broken wire?
Another way to make a repair in broken wire is to use this sleeve, called the Gripple. The broken ends of the wire are pushed through the Gripple, which is designed so they will not pull out. These are made for fairly speedy repairs, especially if you're making many of them.
Which way is the second strand of barbed wire wrapped?
As you can see here, one strand (the one closest to the sleeve) is wrapped counterclockwise around the barbed wire. The second strand makes a loop over the first wire, securing it in place, and then it is wrapped clockwise several times over the barbed wire.
How much does it cost to squeeze a sleeve shut?
Squeeze the sleeve shut with this crimping tool. The tool costs anywhere between $50 and $100. If you care less about appearance, you could squeeze these tight enough with a pair of pliers.
