How To Re-Carpet Boat Trailer Bunks
- Strip away the old carpet and remove any remaining staples or screws that were holding down the old carpeting.
- Once the wooden bunks are revealed, inspect them for any signs of damage or rot and replace them if necessary. ...
- Lightly sand the bunks with the sandpaper to make sure there are no rough edges that could cut through the new carpet.
- Measure the dimensions of the bunks and add 3 inches to each dimension. ...
- Drape the carpet over the bunks lining up the edges and keeping the carpet centered. ...
- Hold the carpet in place and use the staple gun to secure the carpet. ...
- Maintain your trailer! You have invested a lot of money into your boat and maintenance is an important component to keeping it in top shape. ...
How to refurbish an old boat trailer?
You may be able to do most of the work yourself and save money in the process.
- Assessing Your Trailer. Is your trailer a candidate for refurbishing? ...
- Tech Support. Cost: Will vary, depending trailer size and its condition, the running gear was already in decent shape, so my total was about $400.
- Getting Started. ...
- Stripping The Trailer. ...
- Time For Paint. ...
- Putting It All Back Together. ...
- Hit The Road. ...
How to recarpet a boat trailer?
- Many owners chose to go with a new marine carpet. ...
- Another option to replace marine carpet is using truck bed liners. ...
- Snap-In Carpet is also an inexpensive and more flexible alternative. ...
- Replacing boat carpets with vinyl can bring you wonderful experiences. ...
- Can be quite different, but Durabak marine paint is an incredible boat carpet alternative. ...
How to load a boat on a trailer by yourself?
Loading a Boat on a Trailer in the Wind
- Watch other boats load to gauge the situation.
- You may want to approach the trailer upwind so that when you reach the trailer you’re lined up with the bunks.
- In this case, it helps to use a little more power to quickly secure the boat on the trailer bunks before the wind or current gets you crossed up.
How to repaint a boat trailer?
- Rinse the trailer down using fresh water.
- Utilize rust-proof coating on the boat trailer
- Make it a habit to store the boat trailer in a dry location and away from any drenched areas.
What kind of wood do you use for boat trailer bunks?
pressure-treated pineFor wood, pressure-treated pine is the industry standard for trailer bunks. Popular alternatives are oak, cypress and other hardwoods that add even more durability. Composite boards used for patio decking are other options, but pressure-treated pine is a proven material with economic benefits.
How do you replace boat trailer bunk board brackets?
3:449:36Bunk Bracket Replacement! - YouTubeYouTubeStart of suggested clipEnd of suggested clipTook one of the old brackets. And grinded it down and then cut off the angle. And then I painted itMoreTook one of the old brackets. And grinded it down and then cut off the angle. And then I painted it to help out with some corrosion.
How do bunk boards attach to trailers?
2:145:02How to replace boat trailer bunk boards - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis one's all set to go we're gonna get some stainless steel screws put into it i've used the c-MoreThis one's all set to go we're gonna get some stainless steel screws put into it i've used the c-clamp to tighten the 2x6 treated to the cradle.
How do you replace bunk carpet on a boat trailer?
2:1711:42Boat Trailer Bunk Carpet Replacement - Part 1 - YouTubeYouTubeStart of suggested clipEnd of suggested clipDown here is the front end of the left side. And now we're ready to the boat blanket material has aMoreDown here is the front end of the left side. And now we're ready to the boat blanket material has a soft side and obviously an underside we want to be working from the underside.
How do you make a boat bunk lift?
1:404:10Fabricating Boat Bunks - YouTubeYouTubeStart of suggested clipEnd of suggested clipTaking the bunks. Here's once actually fabricate it up you know just indoor/outdoor carpet piece ofMoreTaking the bunks. Here's once actually fabricate it up you know just indoor/outdoor carpet piece of either pressure-treated or redwood or seed or something that's not going to rot really quick.
How do you attach carpet to bunk boards?
1:022:15Trailer Bunk Carpet Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure the carpet is flattened and stapled tight to the bunk placing staples approximately everyMoreMake sure the carpet is flattened and stapled tight to the bunk placing staples approximately every four inches ends are stapled first by using a carpet knife where the carpet folds over the plywood.
How do you hang boat bunks?
3:115:27Bunk Board Guide-on Installation - Boat Trailer Rails - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith a swivel bracket on the outside of the uprights. Choose the holes that will best fit the heightMoreWith a swivel bracket on the outside of the uprights. Choose the holes that will best fit the height of the bunk board in relationship to the boat loosely secure the upright to the swivel bracket.
What are the boards on a boat trailer called?
Most boat trailers employ bunk boards to cradle the hull during towing and storage.
How long should bunk boards be?
Ideally, the bunk boards should be at least half as long as your boat and run from the stern (or a few inches beyond it) to the bow as far forward as you like.
Do you glue trailer bunk carpet?
You may either glue or staple your replacement bunk carpeting down. We would suggest just to staple your new bunk carpeting. This will allow the carpet to give a little while loading and un-loading your boat and prevent tearing of the carpet over time.
How do you stick Marine carpet down?
Apply carpet glue to the back of the carpet with trowel using circular motions moving from front to back. You are looking to apply a thickness equal to a heavy coat of paint. Do not allow glue to puddle or leave any dry areas. For best results, allow glue to get tacky before unfolding carpet onto side with glue.
How do you cover trailer bunks?
0:006:19How to carpet boat trailer bunks - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll right here's how we're going to put on the bunk carpeting i'm going to show you how to do it aMoreAll right here's how we're going to put on the bunk carpeting i'm going to show you how to do it a lot of people they get to the ends and they have all kinds of problems at the ends and it ends up a
What are the boards called on a boat trailer?
Re-covered Trailer Bunks Your boat trailer most likely has carpeted covered boards called bunks that protect the hull of your boat during transportation, loading and unloading of your boat. While the carpet is mildew and mold resistant, it will wear out over time.
How do you lift a boat off a trailer at home?
3:566:16Easy way to remove boat from trailer on land, followed by ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd put a strap around the bow lift. The bow up. And then I should be able to slip the trailer. Out.MoreAnd put a strap around the bow lift. The bow up. And then I should be able to slip the trailer. Out. So I have the front of the bow of the boat lifted. With the eye on the front.
How do you repair a wooden boat trailer?
5:2011:23Boat Trailer Bunk replacement - DIY (wood and carpet) in 4K - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo here's a look at our new piece of wood against that old worn-out piece of wood. And we'll carryMoreSo here's a look at our new piece of wood against that old worn-out piece of wood. And we'll carry that over the trailer. And we'll just lay it down. And Center your metal brackets.
Which wood should I use?
For wood, pressure-treated pine is the industry standard for trailer bunks. Popular alternatives are oak, cypress and other hardwoods that add even more durability. Composite boards used for patio decking are other options, but pressure-treated pine is a proven material with economic benefits.
Sizing up the job
The material should be cut to fit on the board to allow end seams, without overlapping on the underside of the bunk. The experts recommend leaving an open seam with space between each edge, instead of doubling up on the carpet material. Wood expands when wet and the open seam allows room for expansion.
Should I use glue or staples?
Deciding how to fasten the carpet to the bunk comes down to choosing between glue or staples. There are pros and cons for using both. Glue provides a tight, secure seal between the wood and backing. Staples allow some give as the hull slides across the carpet to prevent it from tearing.
Just imagine..
No more carpet to replace, no more exposed wood scratching your boat, no more wasting money on plastic strips. The Ultimate Bunk Board is ideal for any boat trailer, PWC or boat lift! Our bunk boards are made from High-Density Polyethylene Plastic with a UV inhibitor added to help resist fading.
Ultimate
The ultra-smooth surface of Ultimate Bunk Boards makes launching and loading your boat easier than ever. Simply back your trailer to the desired launch depth, then unhook your boat and it will slide off your trailer with ease. Loading the boat is just as simple, you only need to idle up to the trailer and hook it up.
Supreme
Supreme Ultimate Bunk Boards have all the benefits of our original Ultimate Bunk Boards, and are intended for use with larger sized boats and trailers. Supreme boards include heavy-duty screw mounted aluminum rails that give extra support for larger, heavier boats.
