- Clean The Area To Be Patched
- Cut a piece of patch material that is at least 2 inches larger than the hole in all directions
- Apply adhesive to your patch and place it over the hole, smoothing out any air pockets with a roller or squeegee. ...
- Let adhesive dry for 24 hours before using again
- Clean up excess glue with water and soap before letting it dry completely
- Inflate bounce house and check for leaks on seams to ensure that this fixed problem has been solved permanently
- Clean the area to be patched.
- Cut the patch into the shape of a circle.
- Flatten the cut areas.
- Apply vinyl glue around the leak.
- Apply vinyl glue to the patch.
- Press the patch on and apply pressure.
- Check that edges are sealed.
How do you fix a broken bounce house patch?
Check to make sure the edges of the patch are completely glued to the bounce house. If there are any pieces of the patch peeling away, put more glue and apply pressure until the patch is completely adhered to the bounce house. Let the glue dry for a couple hours before using the bounce house.
How to repair a bounce house netting?
Sewing a tear with the awl kit and then applying a patch is the most permanent professional bounce house patch repair that you can do. Fixing the netting on a bounce house in a professional way takes some time and involves some weaving skills.
How do I repair a hole in my inflatable?
To repair your inflatable: • Clean and dry the damaged area • Apply one to two drops of repair adhesive to the hole • Allow the adhesive to dry for 24 hours
How do you know if there is a hole in bounce house?
There’s a few ways you can easily find if there’s hole in a bounce house, but for smaller leaks, it can be more difficult to find. The simplest way is to walk around the bounce house while inflated and the blower running and feel for any air escaping the bounce house where it shouldn’t be.
How do you fix a hole in a seam of inflatable bounce house?
0:531:52How to patch a leaking seam with repair tape - Bounce House TutorialYouTubeStart of suggested clipEnd of suggested clipYou want to stretch the patch as tightly as you can this repair tape is very elastic. And so it'sMoreYou want to stretch the patch as tightly as you can this repair tape is very elastic. And so it's actually made to do that okay now the tape is completely applied.
How do you fix a rip in a bouncy castle?
0:527:56How To Repair a Bounce House | Repair a Bouncy Castle - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou know alcohol it's going to dry very quickly. And then you're going to take your TPU patchMoreYou know alcohol it's going to dry very quickly. And then you're going to take your TPU patch material peel it from its backing. And apply it carefully to the area that's being repaired.
What kind of glue do you use to patch a bounce house?
vinyl cementSimply apply the vinyl cement to the cleaned area on the unit and also on the secondary vinyl (patch or what you are gluing to the inflatable). The vinyl cement needs to dry for a couple of minutes to become tacky then apply together with pressure for a few minutes.
Can You Use Flex Seal on a bounce house?
0:021:532018.10.14 - Using flex-seal tape to fix bouncy houses - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe just apply that right in there and it sticks all the time keeps all that air from coming out andMoreWe just apply that right in there and it sticks all the time keeps all that air from coming out and it's got a nice clean.
Can you sew a bounce house?
0:101:48Repair Damaged Stitching using a Sewing Awl Kit - YouTubeYouTubeStart of suggested clipEnd of suggested clipStart off roughly a quarter inch away from the damaged. Area. With your sewing awl kit push theMoreStart off roughly a quarter inch away from the damaged. Area. With your sewing awl kit push the needle through the vinyl and pull the end of the thread all the way out.
How do you find a hole in a bounce house?
0:021:16Life Hack: Easily find the leak in an inflatable object - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you don't actually know where just spray the area rub. It in. There it is right. There. Do itMoreAnd you don't actually know where just spray the area rub. It in. There it is right. There. Do it again there. That's where the hole.
Can you use epoxy on inflatables?
3:304:16How To: Inflatable Repair Adhesives Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou'll want to use G flex epoxy G flex is a very strong and flexible epoxy that will stick to justMoreYou'll want to use G flex epoxy G flex is a very strong and flexible epoxy that will stick to just about anything as long as the surfaces are prepared properly.
How do you fix a hole in an inflatable water slide?
After you have sewn your inflatable water slide, you need to patch the hole. Cut a patch that is at least ½ inch bigger than the tear, spread small amounts of glue around the square, and place the patch onto the glue to cover the tear. Then let the glue dry on the patch for at least 24 hours.
How do you patch an inflatable vinyl?
Patch It Up!Step 1: Drain The Water. ... Step 2: Cut The Patch. ... Step 3: Dry And Clean The Patch Area. ... Step 4: Inflate The Kiddie Pool. ... Step 5: Apply The Glue. ... Step 6: Apply Your Patch. ... Step 7: Let It Dry.
Can flex seal stop air leaks?
Yes it does! Many users have had great success with using Flex Seal for a variety of uses. Whether you are using it to fix a leak, prepare for a storm or using it as a sealant, we know that you will be impressed with Flex Seal.
Will flex tape work on an air mattress?
0:4714:55Will Flex Tape seal an air matress? - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I can only assume that. It's working well.MoreSo I can only assume that. It's working well.
How do you secure a bounce house on concrete?
A bounce house can be set up and used on concrete if the area is relatively flat and solid. It's recommended that a tarp be placed under the bounce house to protect from rubbing and wearing thin against the concrete. Sandbags, water bags, or concrete blocks can be used to anchor the bounce house in place.
Can you patch a bounce house with Gorilla tape?
0:000:38How to Repair an Inflatable with Gorilla Waterproof Patch & Seal TapeYouTubeStart of suggested clipEnd of suggested clipHaving located the leak first you need to make sure the area is clean by giving it a wipe roughlyMoreHaving located the leak first you need to make sure the area is clean by giving it a wipe roughly measure your gorilla waterproof patch and seal tape black.
How do you repair a nylon bounce house?
Vinyl bounce houses are fixed with vinyl glue, while nylon bounce houses are fixed using a sewing kit. Because nylon is basically fabric, you can treat it as such and stitch a nylon bounce house just as you would a torn jacket.
What glue is good for vinyl?
Polyurethane glue is ideal for gluing thinner flexible vinyl together as well as gluing vinyl to other surfaces like wood or plastic.
How do you repair an inflatable seam?
0:233:55Invisible Seam Repair on an Inflatable Toy - YouTubeYouTubeStart of suggested clipEnd of suggested clipSome cotton balls to use with the rubbing alcohol a blunt tipped industrial syringe that i filledMoreSome cotton balls to use with the rubbing alcohol a blunt tipped industrial syringe that i filled with a small amount of vinyl cement. A pair of tweezers for positioning the patch inside the toy.
How To Find A Hole In A Bounce House
It can be challenging, but it’s not impossible. First, ask yourself if there are any leaks or holes in the inflatable walls of the bouncy castle. If so, this could mean that air is escaping from someplace – and maybe even through a small opening where someone poked their finger though to create an escape route for themselves!
Quick (but Temporary) Repair A Hole In A Bounce House
Bounce houses are a great source of fun for kids, but they can be pretty expensive. Sometimes the inevitable happens and you have to patch up that hole in your bounce house left by mischievous children or an errant soccer ball. There’s no need to pay full price at the store when there is such a quick temporary fix!
How To Patch A Bounce House The Right Way
You may be wondering how you should go about repairing that tear in your child’s favorite inflatable.
Do I need to Patch Everywhere that I feel Air Coming Out?
Air can escape from a bounce house in many different areas. Some of the most common are at seams where two pieces of material meet and through zippers. To be safe, you should patch any holes on your inflatable before inflating it to make sure no air escapes indoors!
How To Fix A Net On A Bounce House
Fixing a net on your bounce house can be difficult and time-consuming. However, there are ways to help make it easier! First, find the top of the ladder where you plan to attach your netting. The best place is about 3 feet from one corner at an angle that’s perpendicular (at 90-degree angles) with respect to both corners.
How To Fix Bounce House Discoloration
The brilliant colors of a bounce house can fade after being exposed to the elements for too long.
How do I prevent rips and tears in my Bounce House?
Did you know that the best way to prevent rips and tears in your Bounce House is by making sure it’s properly inflated and that you don’t have any sharp objects like metal spikes or nails on the side of it? Sharp objects can get stuck inside the fabric, causing holes as large as a tennis ball!
How to Find the Hole in Your Bounce House
It’s not always an easy task to find smaller holes in the house. For your first attempt at finding one, run the blower so you can walk the perimeter and feel for any air escaping.
Step-by-Step Guide to Patch a Hole in Your Bounce House
Fix your bounce house properly by using a proper vinyl patch kit. It does take a little time to accomplish your task. However, the bit that takes the longest amount of time is finding the leak. Since you already found it using the above tips, you’re already about halfway to completing the job and getting back to sitting in the shade.
Quick Patch Options
If you’re short on time, then you can use one of two quick patch options:
Is the Tear at the Seam?
If you discover that stitching has become damaged or the tear causing the leak is on a seam, then you can consider sewing the seam. A quality sewing awl kit gives you everything you need to sew the seam.
When to Call in a Professional
If you’ve followed the step-by-step instructions, made your repairs, and the problem persists, then it’s a good idea to call an inflatable repair expert.
When to Replace Your Bounce House
If the air leak still persists after you’ve tried the patch kit and called in a professional, it may be time to invest in a new bounce house.
How to Prevent Vinyl Tears in the First Place
Now that you know how to patch and repair your bounce house, you might want to know how to prevent rips and tears in the first place.
What to use to make bubbles last longer?
If all else fails, you’re going to want to turn to soap and water. Some folks recommend mixing in some glycerin, which is useful for retaining the effectiveness of the bubbles you’re about to create - using a detergent helps to lower water’s surface tension, which in turn enables bubbles to last longer.
How to get a patch to not stick?
First, make sure the patch is flat and not stuck to another piece of itself. After that, you have two choices . One, sit there and hold the pieces together for several minutes. Or two, find a heavy object and get it to do the job of maintaining an adequate amount of pressure on the patch site. Your choice.
Can you use corn syrup in a bounce house?
You will want to properly clean your b ounce house if you’re going to add in a third party adjunct (ie - the glycerin, corn syrup, or other substitute).
How to repair inflatables with adhesive?
If you’re repairing inflatables with the kit’s patches, add a little more adhesive to the edges of the patch after the drying process is complete to increase the strength of the seal. Also, confirm that the adhesive is completely dry and that the repair was successful before launching the inflatable back into the water.
How to get rid of bubbles on a boat?
You’ll need it to locate leaks in towable inflatables. In the bucket, combine a squirt or two of soap with water until you have a mixture that your kids could use to blow bubbles.
How to remove a towable tube?
Remove the tube section of the towable from its protective cover, and add air to it until the tube is taut. The next step is to dip a sponge or cloth into the dish soap mixture. Then, apply it to the tube section. If there is a hole in the tube, bubbles will begin to form around the spot.
How to find a leak in a water tube?
If you don’t have soap with you, then you can locate the leak by removing the tube from the protective section of the inflatable. Deflate the tube until it’s about 3/4 full of air. Take the partially inflated tube and slowly submerge it under the water. Submerge the tube section by section.
Why are inflatable water tubes made of durable materials?
Built to Last. Inflatable water and snow tubes are made from durable materials, but because the covering is malleable, it is susceptible to punctures and abrasions. Proper care is the best way to prevent repairs.
How to find a leak in an inflatable?
How to Find the Leak. Before diving into the task of locating a leak on the surface of your inflatable, check the valve. These leaks are often caused by grit or sand that jams the device and prevents the one-way speed safety valve flap from closing properly. Use an air pump to blow out any foreign fragments from the valve.
Can you smoke inflatables?
The adhesive used to repair inflatables is flammable, so be sure to store it away from all heat sources. Don’t smoke while using it, and avoid making repairs near an open flame. When using the repair kit, make sure that you’re in a well-ventilated area. In addition, take precautions to avoid contact with your skin, eyes, and clothing.
