How to Fix Your Broken Bras -- Part 1
- Solution: a good clean. Sweat, deodorant and body creams can all discolor bras but can be washed out. Create a paste with baking soda and water.
- Solution: sew a cover on. A protruding underwire can be painful, and sometimes sharp. It’s important to cover it back up before you wear the bra again.
- Solution: replace them. Too much heat, such as in a tumble dryer, will damage the elastic in your bra’s straps. ...
- Solution: cover them up. Some tears and holes are simply too big to repair. If it’s just a small one though, why not sew something on top?
How to restore damaged brass?
Things You Will Need
- Soft-bristle brush
- Soft cloth
- Very fine steel-wool pad
- Soap
- Bucket or container
- Acidic substance, such as vinegar, cola, lemon juice, ketchup, toothpaste, tomato products, Worcestershire sauce
- White vinegar
- Salt or flour
- Commercial brass cleaner
- Plastic bag
How can I repair rusted/Tarnished Brass?
- A toothbrush will help you get into all the nooks and crannies;
- Fine wire wool will let you remove stubborn tarnishing without scratching your brass hardware;
- Olive oil is a great option to naturally polish your piece and repel any water that's been trapped as part of the cleaning process.
How to clean and care for brass?
Cleaning pure brass is a fairly simple process, mainly because brass is a hardy metal. Soap and water will take care of most brass, though you can use other home remedies for tougher jobs. Keep in mind, though, that brass can be scratched, so don't scrub it with anything too tough, such as steel wool pads or abrasive sponges. [1]
How to clean brass and how to polish brass?
Part 3 of 3: Cleaning Plated Brass Objects
- Determine if the piece is brass or brass-plated. It could be hard to differentiate if a brass piece is actual brass, or brass-plated.
- Clean your lacquered brass-plated piece. Clean the entire brass-plated surface with a mixture of mild soap and cold to lukewarm water.
- Clean your un-lacquered brass-plated piece. ...
- Rinse and apply a mild polish. ...
How do you repair cracked brass?
3:3821:27Patching a Bell Crack: Restoring an Antique French Horn #4 - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust going to open it up a little bit and then a little bit. More. Until i can get that ring out ofMoreJust going to open it up a little bit and then a little bit. More. Until i can get that ring out of there. Okay there it goes. Now with a little bit larger screwdriver i'm going to melt the solder.
How do you join brass together?
How to Braze Brass to BrassUse an oxyacetylene torch in most instances to weld brass. ... Mix a paste of braze-welding flux and water and apply it to the surfaces that are going to be welded.Lower the acetylene in the mix until you have a strong oxygen rich flame able to produce coating on the base metal.More items...
Can brass be mended?
Virtually any metallic item can tarnish or corrode. And virtually all of these can be refinished or repaired if needed. Part of our brass restoration service includes repairing these items, polishing them back to the natural finish then degreasing them followed by a lacquer coat finish.
Can you solder brass back together?
7:1411:42How to Solder Brass - YouTubeYouTubeStart of suggested clipEnd of suggested clipThey soldering creates a very strong bond between brass. Parts. So show you our other example hereMoreThey soldering creates a very strong bond between brass. Parts. So show you our other example here my exhaust stack we're working on give it a try this is a much more challenging solder.
How do you bond brass to brass?
Bonding compound: Loctite Weld Another option for gluing metal is Loctite Epoxy Weld Bonding Compound. A convenient alternative to welding, it's the strongest solution for bonding most metals, including iron, steel, aluminum, brass, copper, and pewter.
How do you fix brass to brass?
0:071:30Brass Repair Made Easy. And Copper. Bronze. Aluminum. In ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd flux working on a piece of brass with a hole in it. This rod works at 350 degrees holds 20,000MoreAnd flux working on a piece of brass with a hole in it. This rod works at 350 degrees holds 20,000 psi watch your flux I'm putting the flux on right now I just dipped my rod into the flux.
Can I solder a crack in brass?
0:599:30How to Solder Brass Nozzle Crack - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd i'm assuming this is brass i hope it's brass because you can solder brass. But if it's some sortMoreAnd i'm assuming this is brass i hope it's brass because you can solder brass. But if it's some sort of mix i don't know what's gonna happen but that's why we're doing the video.
What is the best solder to use for brass?
If you have done any electronic soldering you probably used a lead based solder. This is fine for soldering electronic components together but isn't really strong enough, nor does it give a great bond, to copper and brass. Your best option is to use a silver solder.
How do you weld brass?
0:502:06A Tig Welding Brass Repair Job - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo brass has got zinc in it you need a respirator you need some ventilation it will make you sickMoreSo brass has got zinc in it you need a respirator you need some ventilation it will make you sick just like galvanized will. But as far as welding goes the zinc is a problem because it it out gases.
Is there such a thing as brass solder?
Brass is a corrosion resistant gold-colored alloy comprised of copper and zinc. Its conductivity, durability and low melting point make it a desirable metal used in a variety of applications such as: jewelry making.
Can brass be welded?
Brasses may be welded using MMA, MIG or TIG. Filler metals are available although these are generally based on copper-silicon or copper-tin alloys due to the problems of transferring zinc across the welding arc. A typical MIG/TIG filler metal would be the 3% silicon alloy specified in EN ISO 24373 SCu 6560 (CuSi3Mn1).
Can you weld or solder brass?
Brass usually has a melting point within the 900 to 940 degrees Fahrenheit range, which makes it easier to cast using multiple methods. You can silver solder, as well as MIG and TIG weld brass successfully, giving you a variety of options.
What is the best solder to use for brass?
If you have done any electronic soldering you probably used a lead based solder. This is fine for soldering electronic components together but isn't really strong enough, nor does it give a great bond, to copper and brass. Your best option is to use a silver solder.
How do you weld brass?
0:502:06A Tig Welding Brass Repair Job - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo brass has got zinc in it you need a respirator you need some ventilation it will make you sickMoreSo brass has got zinc in it you need a respirator you need some ventilation it will make you sick just like galvanized will. But as far as welding goes the zinc is a problem because it it out gases.
Can JB Weld be used on brass?
J-B Weld will bond to virtually any clean, dry surface including: iron, steel, copper, aluminum, brass, bronze, pewter, porcelain, ceramic, marble, glass, concrete, fiberglass, wood, some plastics, and many more.
What flux do you use for brazing?
Borax-based fluxes: In addition to being a common ingredient in detergents and many other products, borax has long been used as a flux in welding processes, including brazing. Borax improves the flow of filler metals and reacts with certain oxides to lower their melting points.
How to get rid of stains on bras?
Sweat, deodorant and body creams can all discolor bras but can be washed out. Create a paste with baking soda and water. Spread it over the stained areas and leave for an hour or two. Rinse off and wash the bra as usual .
Can you damage bra straps?
Too much heat, such as in a tumble dryer, will damage the elastic in your bra’s straps. Shoulder straps under a lot of strain from a heavy bust will stretch out with time too. Tighten them all the way, and they’re still too long? You could merely snip them off and sew a new pair in place.
What is the best way to clean brass?
A toothbrush will help you get into all the nooks and crannies; Fine wire wool will let you remove stubborn tarnishing without scratching your brass hardware; Olive oil is a great option to naturally polish your piece and repel any water that's been trapped as part of the cleaning process.
How to restore lacquered brass?
To restore lacquered brass hardware, soak it in a paint stripper for a few minutes and then use steel wool to scrub the lacquer until fully removed. This can take some time as the lacquer is clear, making it hard to see the spots you have missed.
How to get tarnishing off brass?
Create a paste using ¼ cup of salt with ½ cup of lemon juice, then rub into the brass with a soft toothbrush to remove tarnishing. However, you must make sure you wash off the lemon juice with water as it's acidic and will corrode the brass hardware if left. Once washed and dry, rub with olive oil to chase out the water and preserve the shine.
How to tell if hardware is brass?
You can tell if hardware is brass by touching it with a magnet – if it sticks, it is not brass as brass isn’t magnetic. If your hardware is not brass (as the magnet sticks to it), then gently washing with warm soapy water followed by a gentle rub with olive oil to chase out the water, is the best course of action and will have your hardware shining ...
How to restore brass hardware that has been covered with paint?
When it comes to restoring brass hardware that has been covered with paint, ‘I prefer the boiling method over using a paint stripper ,’ says Jon Eaton. ‘Add hardware to low boiling water – if you have several pieces I suggest doing one piece at a time so as not to get parts mixed up.
What is brass hardware?
Brass hardware is simply hardware made from solid brass. There are lots of brass-plated and finished versions but solid brass hardware offers a longevity and quality that adds traditional character to a home. 'Cast, sheet or spun brass was widely used to make door and window furniture but requires regular polishing.
How to get paint off metal?
Using the steel wool rub the paint off the metal. It may take some scrubbing in places, and come off easily in others. Simply rub and polish till all paint is removed. Use a utility knife to pry any paint out of crevices, like the heads of screws.
How to remove old finish from brass?
You can also use steel wool, but this may scratch the surface of the brass object. Scrub the brass object until all of the old finish is removed. Clean the brass with hot, soapy water. Once you successfully remove the old finish from the brass, fill a sink with hot water and mild dish soap.
How to protect brass after polishing?
After you polish the brass, you will want to protect it by applying a protective coating to the surface. Try using a high-gloss urethane or UV-resistant clear lacquer to the brass object. Apply 3 or 4 coats of lacquer to the item, allowing the lacquer to dry completely between coats.
How to clean brass with vinegar?
Try pouring white vinegar directly on the brass object. Then sprinkle the surface of the object with table salt. Allow the salt and vinegar to sit on the object for about 5 minutes. Then use a wet cloth to wipe down the brass. Finally, wash the brass with hot, soapy water, rinse, and dry with a soft cloth.
How to polish brass with lemon?
Make a polish with lemon and cream of tartar. Combine one part lemon juice with two parts cream of tartar. Mix the ingredients together with a spoon until they form a paste. Apply the paste to the brass object and let sit for 30 minutes. After half an hour, rinse with warm water.
How to make brass ring shiny?
Cut a lemon in half and remove the seeds. Then sprinkle salt on the flesh of the lemon. Rub the lemon directly on the brass object and polish with a soft cloth until shiny. Once the object is shiny, wash with hot soapy water, rinse with cool water, and dry with a soft cloth.
How to clean tarnished brass?
First, remove old finish from the brass with a standard paint stripper. Once you remove the old clear coat, wash the brass with hot soapy water. Then polish the brass using a lemon or vinegar solution.
How to protect brass from re-lacquer?
If you do not want to re-lacquer the brass, you can protect it with a coat of oil. Apply lemon oil or olive oil to a soft, dry cloth. Then use the cloth to apply a thin layer of oil to the brass object. Make sure you apply a very thin coat over the entire surface.
How to get a permanent bond on brass?
The surface must first be cleaned, preferably with an alcohol-based solution to remove any greasy substances. If you don’t have an alcohol-based solution, use neat detergent, which is a good alternative for cutting through grease. The surface can be roughened with sandpaper. Once the surface is rough, there is no need to clean off all the shavings. These shavings will aid in the bonding process.
How long does it take for brass to bond?
Check packaging for bonding times, which are usually between 12 and 24 hours.
What glue to use to glue brass?
The glue most suited for gluing brass to surfaces is 2 part Epoxy (Polyepoxide). There are many brands of glue to choose from which are readily available at hardware stores and supermarkets. Always check the instructions on the packaging before purchasing to ensure metal is included on the list of applications.
