Here is the process for changing out a broken toilet handle:
- Buy a new tank lever.
- Remove the tank lid.
- Inside the tank, detach the lift arm from the chain/rod that connects it to the flapper.
- The flush handle is secured in place with a mounting nut where the lift arm pivots. Before you start turning the nut,...
- Once you have removed the nut, the handle assembly should...
How to flush a toilet when the handle is broken?
- Take down the toilet tank lid.
- Roll up the sleeve and reach down into the tank. Find the flapper and pull it up in order to flush the toilet.
- If possible, try repairing or re-attaching the chain.
How to repair a stuck handle on a toilet?
To fix this problem, 'you will need to remove the cover of the toilet tank and clear any debris from the impeller. You can do this by reaching in and manually moving it around. If it is difficult to reach, you can try using a coat hanger or other small tool to dislodge the obstruction.
How do you replace the handle on a toilet?
- Shut off the water supply to the toilet tank. ...
- Lift and remove the cover from the water tank. ...
- Locate the lift chain hooked to the handle rod. ...
- Unhook the chain from the handle rod.
- Remove the nut that is attached to the handle, holding it in place. ...
- Remove the handle and replace it with the new one. ...
How to fix a loose or wiggling toilet handle?
- Turn off water to the toilet.
- Flush the toilet and hold down the flushing handle to remove most of the water from the tank.
- Remove the toilet tank lid.
- Disconnect the toilet flapper lift chain from the toilet handle arm and drop it inside the tank.
- Loosen the toilet handle locknut. ...
- Once loose, remove it through the flush handle arm.
How do you flush a toilet when the lever is broken?
Fill a bucket with at least one gallon of water. Begin by pouring the water into the bowl, slowly at the beginning while gradually speeding up and dump the remainder of the water into the bowl. If done correctly, the water should push the waste in the toilet through the pipes, and your toilet will flush.
Why does my toilet handle keep breaking?
I have found that in the times mine has broken that it was often that the flush valve was old, covered in rust/minerals, and sticking. Replacing the flush valve with a newer one which required much less force to flush not only prevented the lever from breaking, but made it easier to flush.
Is it easy to fix toilet handle?
Replacing a toilet handle is a simple project that even a novice DIYer can take care of. In just a few minutes you can update the look of your toilet and bathroom with a new handle or replace a broken toilet handle that is wiggle-free.
Are toilet handle replacements universal?
Choosing a Toilet Handle Another way to get the type of handle you need is to purchase one from the manufacturer of your specific toilet. There are also universal handles that will fit almost any toilet, no matter what type of tank lever you currently have.
How much does it cost to replace a toilet handle?
Cost to Replace Toilet Handle Expect to spend between $50 and $120 to replace a toilet handle. Some toilet handle models have a low cost. For high-end models, you may pay up to $100. The toilet handle is responsible for lifting the chain connected to the flapper and flushing the water into the bowl.
What is the lever on a toilet called?
It is also called a flapper valve. Toilet lever: Connected to the handle, this lever lifts the rubber flapper, which triggers the flush. It is also called the lift rod.
Do all toilet handles fit all toilets?
Just because front toilet flush handles are the most common type, it does not mean that any front toilet handle will work on all toilets. When replacing a front flush handle, measure to ensure you have the correct size.
How do you install a toilet side lever?
0:031:09How to Install Side Mount Toilet Tank Lever - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo get the most lift. Make sure the arm swings as close to the front wall of the tank as possibleMoreTo get the most lift. Make sure the arm swings as close to the front wall of the tank as possible when flushing. For some pain you may need to flip the elbow.
How do you replace a toilet tank lever?
0:313:10Plumbing - Replace Toilet Tank Lever Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipFrom the tank left. And then we're going to use a pair of our crescent wrench. And remove the tankMoreFrom the tank left. And then we're going to use a pair of our crescent wrench. And remove the tank lever. From the toilet tank.
If jiggling the handle doesn't solve the problem, one of these simple fixes probably will
Every editorial product is independently selected, though we may be compensated or receive an affiliate commission if you buy something through our links. Ratings and prices are accurate and items are in stock as of time of publication.
Introduction
A toilet handle is a simple mechanism — only a few things can malfunction. The fix is easier than you think.
Materials Required
Start by lifting the lid off the top of the toilet tank and peeking inside.
Project step-by-step (4)
If the handle is loose, tighten the nut and washer on the inside of the tank with a pair of pliers. Do not overtighten the nut. You could strip the threads or, worse, crack the porcelain tank.
How to Fix a Toilet Handle
How to fix a toilet handle or to replace a toilet tank flush lever with a higher quality handle.
How to Fix a Toilet Handle
Replace a broken toilet tank flush lever with a higher quality handle with these simple tips. This tutorial will help you change out the aesthetic in your bathroom by replacing your flush level with new hardware, or you can fix a broken level. It's the same process!
Is the Broken Handle Fixable?
It's possible the broken handle can be fixed with a simple solution. What is the nature of the problem? If it's loose, you can probably tighten the nut that secures it into place. Or maybe the issue is that the flushing mechanism doesn't work at all. You might need to reconnect the flapper chain (or lift rod) to the lift arm.
Before You Start Your Replacement Project
You should know that not all toilet handles work the same. Though there are universal options, you need to be careful that you don't accidentally buy one that won't fit your toilet tank. Your handle may mount on the front, left side, or right side, and you need to take note of this before making a purchase.
Shop PlumbersStock for Parts and More
Now that you know how to replace a toilet handle remember, you can save big on all the toilet parts and plumbing tools for this project at PlumbersStock. Our organization has three decades of experience in the plumbing industry, and we've brought that expertise online.
